Anybody have a good base suspension setting for an older belt drive touring car? I've just gotten my all graphite 4-Tec set back up for bashing with a VXL system and Nitro diffs in it. It runs good bit seemed ot turn better left than right but the camber was a little off. Right now toe is set right around zero both front and rear while I reset camber to 2* front and 1* rear. It had been different on all four prior to me reseting things I do need to go over the shocks again too.

Any suggestions?

hey ya'll! i'm going to try and get a s.c. parking lot race going at the hobbytown in orland park. just for fun. i am testing out a new i-lap system. this will be the first time using it and having a race. if we get enough interest, might do a points series or something. lmk if any one is interested.

ASKING 1000 OBO
Losi XXX4 graphite-17 turn
Duratrax evaderST-12 turn
Associated B4 stealth-9 turn
Associated 18T-stock motor
Traxis Nitro rusler-2.5 engine

LOTS of extras for all paid well over 2000 invested
will seperate

PICTURES ARE AVALIABLE JUST ASK I COULDNT GET MINE TO UPLOAD BECAUSE ITS A PAIN IN THE ASS TO RESIZE THEM ILL SEND THEM BY EMAIL OR HOWEVER YOU WANT

Call or Text Charlie for lots more info at:
Home: (815)513-5091
Cell: (779)279-2329

Finally got pics of a body I painted with Mopar Parts Chrysler Crystal Black Clear Coat spray touch up paint last summer for my E-Revo, plus it still has the Titan 775 I put in last year, the adjustable Traxxas wheelie bar, an Exo-Carbon Wing, P3 suspension parts installed with the sway bars, long travel springs and variable rate pistons, and last year's 3.3 Revo wheels with 3.3 Maxx tires......which, other than not having the black chrome on the rims, is the same combo Traxxas is now using on the Brushless Edition E-Maxx.




I will be adding the bright chromed bumpers off the newest version of the 3.3 Revo before long too.

Current upgrades: Black Magic Specs

Picco .28 (not modded.. YET...)
STS 0702 Pipe, Header
Dynamite Max-Life Aluminum Shoes w/ Mugen 1.0mm springs
3 Speed Transmission (High Speed Gears)
FLM EXT TVPS Anodied BLACK
FLM Center skid plate
FLM Midtank plate
FLM motor plate
D8 150CC "clunk tank"
RPM Receiver box Blk
HPI Plastic Roll bar
Big Bore Shocks w/Hellfire shafts & Bad Horsie socks 30WT Oil
RR 48T SG / 16T HD HPI CB
SF1 T&B Servo / Ace RC 1015 Steering Servo
HPI Wing / Mugen Stay // Custom wing mount
HPI Blast wheels on HPI Phaltine tires
Custom Splash Guards
Custom Hump pack 5 AA 2450mah
Spectrum DX3S W/ Telemetry installed






Lets Race!! :poke:

I'm thinking about selling my 3PM-FS and recievers to switch over to the Traxxas 2.4 Link radio. Besides ther radio, I have 4 FM recievers with Chrystals, a Futaba Synthisized Rx and a Novak XXtra Rx. Any idea what those might be sold for?

FLM Savage Flux Specs:

FLM Flux HD Stock TVP FLM45300
FLM XL Hybrid Bulkheads FLM40010
FLM Savage shock tower FLM43000
FLM Drag Link FLM48000
FLM Servo Plate FLM45500
GH Racing Aluminum Front Knuckles
Team Integy Alloy Rear hub carriers
Mamba Monster/Neu-Castle 2200kv Motor Combo
HPI Machined Bullet Proof Diff Bevel Gear Set
HPI 39T High Speed idler gear
Traxxas Summit waterproof receiver box
Ace DS1015 Steering Servo w/Racers Edge horn << not installed yet
Spi Racing Wheels wrapped with proline badlands
HYPERION G3 VX 6500 MAH 2S 7.4V 35C/65C LIPO (2)







This trucks no shelf queen.. show me a bash spot and lets go

FLM Savage Flux High speed run Video - HobbyZip Hobby Videos and Pictures
Video after the high speed idler gear installed.

I have a Mini-T for sale. It has a graphite chassis, aluminum shocks, novak spy speed control, hitec servo, aluminum steering knuckles and other upgrades I am sure I am forgeting. It includes 2 batteries, an extra set of tires and what ever else is pictured. $100












A set of T-Maxx/E-Maxx tires $40





A Airtronics 93675 Synthesized transmitter module $25



Pick in Dekalb area, can meet up in the St Charles area or can ship at buyers expense

Has OS V-Spec engine installed (1-1/2 gallons) includes spare Con Rod, Wrist Pin and Pin retainers. Ofna Jammin JP-2 Pipe, Steering and Throttle servos, Rx Battery included.

1 package of 2 NEW Front/Rear CV Shafts (to wheels), also 3 out of package new CV shafts
2 Extra FULL SETS Turnbuckles/Toe links (3 Sets total including installed set)
Spare Clutchbell and Shoes
Losi Tuned Flex Chassis NEW only run once, no scratches
Extra Fuel tank
Complete set (2 front, 2 rear) Lower suspension arms
Spare Fuel Filter
2 extra complete shocks (1 front, 1 rear)
Extra Brake Disk Set
1 pkg NEW Rear arm Mud Guards
2 Extra Heavy Duty Diff cases
1 Extra Rear Center Driveshaft
Carbon Fiber Radio Tray
1 Set Losi XTT Tires on Black Dish Rims
1 Set Pro-Line Crimefighters on Yellow Dish Rims
2 Bodies ---

Also includes Ofna Truggy starter box with Dual 775 motors and 12v Gel cell battery and Spare starter wheel.

$400 for all listed above For $600, I will also include an Airtronics M-11 with Spektrum module installed and 2 Rx's

they're old but new to me. I sold both of my old BMWs to get a BMW Wagon. I think next year I'll convert it to a 5 spd, but for now it runs too good to mess around with it. But it will get coilovers, a bike rack and 18s like my last e36.

Also new to me, is my ebay find of an early rc10t with the narrow wheels. I think I would place the kit anywhere from 91 to 92? It came with an old novak t4 esc, and futaba sport.

the touring is a little dirty from some muddy parking lot