+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html)
+--- Thread: Revo guys... (/thread-1272.html)
Revo guys... - satoch - 10-19-2005
I'm hoping that maybe you Revo guys, and former Revo guys, may be able to help me. I'm putting together a second Revo with my spare parts. I've got most of the stuff but I still need some little things that you probably have laying around and won't be using (used is fine). If you've got it and don't mind parting with any of these things I'll gladly pay a fair price.
Here's what I need:
Rear Bulkhead #5329
front caster clips #5134 (8 qty)
Pivot ball caps #5378 (2 qty)
P1 stock pushrods #5813 (3 qty)
Shock end caps #5465 (2 qty)
Motor mount #5360 (just the piece furthest to the rear of the vehicle)
Tank rebuild kit #5376 (just the mounting post)
Yoke that the stub axle goes into off #5451 (1 qty)
Yoke that attaches to diff #5451 (6 qty)
Rear skid plate #5337
I realize that no one person is going to have all of this but I'm hoping that maybe between all of you guys I might be able to get most of this stuff. Please bring what you have to the DD Race on Sunday.
Thanks in advance,
Bruce
Revo guys... - DAVEC-NITRO-RS4 - 10-19-2005
Bruce,
I know this would be a LOT MORE work than picking up the bits you need, but how about getting a brand new Revo, taking what you need and parting out the rest on eBay. It seems like there is a pretty good business doing that already. You could recoup your costs pretty quickly on big chucks like motor/trans/diffs etc.
Just a thought. Heck, I might start doing it myself......hhhmmmmmm......
Revo guys... - too fast - 10-19-2005
ygpm satoch
Revo guys... - satoch - 10-19-2005
Dave, I really only need the above parts and my second truck is done. I had that many spare parts. I'm not interested in selling on e-bay but I know plenty of others who've done what you suggested. I'm not looking for a part-time job. I just want to finish this truck. Thanks again.
Revo guys... - thenewguy821 - 10-19-2005
Bruce, I won't be at the DD race, but I can bring some stuff for you to the Berwyn Bash. I have the Stock pushrods, and the tank mounting posts. Whatever you think is fair, knock the price off one of your custom quickturns, and they are yours.....
Revo guys... - snakebite46 - 10-19-2005
Got stock 5318 Pushrods if you still need them.
Revo guys... - satoch - 10-19-2005
Snake, I'll take 'em. Thanks
Revo guys... - snakebite46 - 10-19-2005
No problem.
Revo guys... - satoch - 10-19-2005
Anybody else have any spare parts?
Revo guys... - Tex - 10-20-2005
I have
Rear Bulkhead #5329 - NEW
Pivot ball caps #5378 (2 qty) - NEW
Shock end caps #5465 (2 qty) - (1) used (if this is a "spring retainer for the bottom of the shock)
Tank rebuild kit #5376 (just the mounting post) - NEW (just the post)
I'll take $5...not really sure how much the stuff cost
Plus I have your Ofna 17T bell and one-way bearing to give back to you. I never used the ofna bell (it's too big, I need a lower profile bell), and I'm not going to run a quickturn. Thanks anyway though. I'll have the stuff this Sunday.
LMK if you want me to bring those revo parts for you
Revo guys... - satoch - 10-20-2005
Tex, yeah, bring the parts. Thanks.
I still need:
The big part of the shock that you unscrew to put in the oil (2 qty)
The piece of the motor mount that is furthest to the rear of the vehicle (1 qty)
The yoke the stub axle goes in to (1 qty)
The yoke that attaches to the gear box/drive shafts (6 qty)
Revo guys... - Tex - 10-20-2005
ok, no prob. I have the two shock caps also, I'll bring those as well.