+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html)
+--- Thread: Trinity hi flow pipe for revo (/thread-1875.html)
Trinity hi flow pipe for revo - destroy_my_revo_15 - 12-20-2005
im getting this pipe for christmas and i have a few ?'s for you guys who run it. is it realli true that it is like a night and day difference between the stock pipe? and should i put a rubber coupler on the header to stop it from breaking?
Trinity hi flow pipe for revo - Toughtrax - 12-20-2005
I can vouch for it and say that it was night and day it woke up my 2.5 and TZ. As far as the coupler I just ran the parts that came with it and had no problems with them at all.
Trinity hi flow pipe for revo - destroy_my_revo_15 - 12-25-2005
ok revo2k and i are having problems with the coupler that goes on the back of the engine. it just seems to not go on right when i go to put on the header. any help would be greatly appreciated. we will be at leisure tommorow if someone can help us there.
Trinity hi flow pipe for revo - Ponch - 12-25-2005
Mine goes on fine....But when I go to put the spring around the engine the pipe just slips right off before I can get the other side of the spring attached...
Trinity hi flow pipe for revo - destroy_my_revo_15 - 12-25-2005
oh well how did u get it on cuz thats what im having problems with
Trinity hi flow pipe for revo - FreeRideFrosty - 12-25-2005
It just sucks to do. Pliers help. Let me know how performance is compared to the vantage pipe... if you have any idea.
Trinity hi flow pipe for revo - destroy_my_revo_15 - 12-25-2005
well i ran it but i didnt kno that it wasnt on right until i noticed the oil everywhere. i can say it screams! a lot more bottom end than stock. havent ran the vantage one tho.
Trinity hi flow pipe for revo - Ponch - 12-25-2005
Hey John!!!!I got mine on!!!I found out that all you have to do is first, take the pipe off the header. Then take the clear seal and put it on the engine where it's supposed to be. Slide it off about 1/4 or less of the way, so that the end of it starts to like.....pull together and become smaller. That way, the manif., when you put it over, will sort of push it the rest of the way on, and since the first part is smaller in diameter, it'll fit right in without getting bunched up. Hold on the manifold, and put the spring into the inner hole first, then stretch around to the outer hole. Hold the manifold really well when you do this or it'll slip off. Then attach the pipe and BAM! It's on. I just did it. Then I put on my 3 shoe clutch so I can whoop you tommrow....hehehe
Trinity hi flow pipe for revo - Ponch - 12-26-2005
Hey John if you can't get it on in the morning, I can help you once we get to leisure.
Trinity hi flow pipe for revo - destroy_my_revo_15 - 12-26-2005
i just ran this thing installed the right way and it is even better than before. i would recommend it to anyone who is running the stock pipe it is like putting nitrous on your truck!
Trinity hi flow pipe for revo - FreeRideFrosty - 12-26-2005
Will this pipe work on the OS .18 tm as well?? I am pretty sure it will but I want to make sure that if I get a pipe now it will work for a later motor...
Trinity hi flow pipe for revo - destroy_my_revo_15 - 12-26-2005
yes it is for the tm and it also comes with a header for .21 and up motors also
Trinity hi flow pipe for revo - FreeRideFrosty - 12-26-2005
I will see how much cash I have left over when I go to al's and what they say they like better between that and the vantage.
Trinity hi flow pipe for revo - Ponch - 12-26-2005
hahaha....I like both of the pipes. I've probably seen this pipe run before not knowing it, and I've seen Tune's revo with stock motor and vantage pipe. I can tell you though, that the CF pipe stays cool enough that you can shut it off and not have to worry about burning the crap outta your hand. Also though, it uses the stock header, and that's pretty crappy....So you still have to deal with that issue of bending/breaking. My.02
Trinity hi flow pipe for revo - FreeRideFrosty - 12-26-2005
gotcha... If I went with the vantage I would probably get a new header too... that would open it up and probably give it some more pop.
Trinity hi flow pipe for revo - Tex - 12-27-2005
tune runs a TM with vantage pipe.
Trinity hi flow pipe for revo - FreeRideFrosty - 12-27-2005
Well I got the vantage and will just run the stock header untill i switch to the TM. (I alrady put a snall scratch in the top :-( )
Trinity hi flow pipe for revo - db302 - 01-05-2006
Hey guys, howdy! As you can tell I'm a nOOb to these forums. Anyway, I figured I may as well post something instead of just lurk. I own both Vantage and Trinity pipes, and have run both on the stock 2.5R and the O.S. .18tm. The Trinity wins performance wise, but not by much. The Vantage is definately the quieter of the two. Just my two cents worth. Anyway, I look forward to meeting some of you at the Chi town area tracks when the weather warms up. Later - DaveB
Trinity hi flow pipe for revo - DAVEC-NITRO-RS4 - 01-05-2006
Dave, good timing on the post. I was just asking the same pipe question today under general Revo discussion. I'm leaning toward trinity. You wouldn't be selling yours, would ya?
We bash in Woodridge off 75th and Woodridge Drive sometimes.
And now indoor dirt racing at Leisure Hours in Joliet. You gotta check it out!!!
Trinity hi flow pipe for revo - UE-Maxx - 01-05-2006
DAVEC-NITRO-RS4 Wrote:And now indoor dirt racing at Leisure Hours in Joliet. You gotta check it out!!!
Clay. LOL
Trinity hi flow pipe for revo - destroy_my_revo_15 - 01-05-2006
hey dave i got mine off of ebay for real cheap like $48 shipped link
Trinity hi flow pipe for revo - Ponch - 01-05-2006
Well I got mine off tower for $51 plus tax and shipping lol...
Trinity hi flow pipe for revo - destroy_my_revo_15 - 01-05-2006
.... mine was way cheaper :crazy:
Trinity hi flow pipe for revo - Ponch - 01-05-2006
Yeah, but if mine came jacked up I could return it..lol plus I didn't pay for it.
Trinity hi flow pipe for revo - thenewguy821 - 01-06-2006
:lol: :pow:
The team mates are fighting... LOL :bustingup