+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html)
+--- Thread: Will this work? (/thread-2435.html)
Will this work? - Ponch - 02-01-2006
http://www.neweramodels.com/cgi-bin/item.cgi?session_id=&part_id=2310
Looking to run my revo w/os21 and 1/8 clutch w/o moving the tranny. Will this allow me to run the 21 w/o moving the tranny? Otherwise, here's some of the other stuff to choose from lol...
http://www.neweramodels.com/prod71_traxxas_revo.htm?session_id=#1105
And which engine mount would I want to use?
http://www.neweramodels.com/prod71_traxxas_revo.htm?session_id=#1000
I already have alu. clutch shoes for 1/8...Thanks!
Will this work? - FreeRideFrosty - 02-01-2006
Even with that flywheel you will probably have to do some modding. If you want I can help you since Gabe taught me...
Will this work? - Ponch - 02-01-2006
I don't even know if I'm going thru with this yet...I have to see yours and if it's worth the upgrading.
Will this work? - FreeRideFrosty - 02-01-2006
All I will say is I have a new truck... there is no comparison...
Will this work? - RobH - 02-01-2006
a 1/8 clutch really makes that much of a difference? I've been thinking about putting one on my supermaxx in the future.
Will this work? - Ponch - 02-01-2006
With a BB I think it would but not with SB.
Will this work? - FreeRideFrosty - 02-01-2006
I can tell a huge difference with the 1/8 scale clutch on the .21 versus the 1/10 clutch on the 2.5... I can't even imagine how bad it would be on a bigger motor. I am glad I spent the time and money and did it right. I will get an extended chassis and mark the holes perfect for the trans and I will be set...
Will this work? - Obsessive R/C - 02-01-2006
Going to a .21 is what made the difference. The 1/8th clutch is only for durability and the fact that you can actually dial it in. Did you use alum shoes?
Will this work? - FreeRideFrosty - 02-01-2006
Yeah... oh... yeah. Those would probably be a big part of the difference. I know my stock clutch got the job done but it was not the best by any means... I may put it up for saly if anyone needs a stock one...
Will this work? - Obsessive R/C - 02-01-2006
What clucth did you go with??
Will this work? - FreeRideFrosty - 02-01-2006
I got it off of Gabe for the most part... It is an ofna 3-pin flywheel for the OS.21 some 16t clutchbell, aluminum shoes and whatever springs he had. The bearings were some $1 ones from LH... Works well... shimmed up perfect.
Will this work? - Obsessive R/C - 02-01-2006
Sweet! You should have just given me your Revo and $100 and i would have given you my BB Revo complete. ;D
Will this work? - FreeRideFrosty - 02-01-2006
:-( I would have done that in a second. Oh well... at least I learned some stuff.
Will this work? - Tex - 02-02-2006
it funner to make stuff work on your own
Makes ya feel like you acomplished something
NovaRc 7075 shoes
Mugen 1.0 springs
HPI clutchbell
(that's what's in Dan's truck)
Dan, after you tune it, if it's undrivabley powerfull drop in a 17T CB and some .9 springs. That will tone the bottom end down and allow you to put the power to the ground alot easier.
Revo2K, read up on putting a OSRG in the revo. I've seen it done but the traxxas BB kit says it will NOT fit, period.
Will this work? - DAVEC-NITRO-RS4 - 02-02-2006
Obsessive R/C Wrote:Sweet! You should have just given me your Revo and $100 and i would have given you my BB Revo complete. ;D
I told him that...but like Gabe says it is better to learn to fish than to just buy fish.
Will this work? - Ponch - 02-02-2006
But I don't like fish!