My diff problems are over - Printable Version +- ChitownRC (https://www.chitownrc.com) +-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html) +--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html) +--- Thread: My diff problems are over (/thread-3417.html)

My diff problems are over - t to the maxx2 - 04-24-2006 I just picked up a 8spyder and cvd setup. What should I do cb and spur wise for this? I run a otb tranny with a UE super 6. And a picco .21 My diff problems are over - UE-Maxx - 04-24-2006 With the stock set up, I think you needed to switch down to a 65 or 66t spur to maintain the normal gearing as if you were using 1/10 diffs. That is with I think the 2.5, so go from there. My diff problems are over - Tex - 04-24-2006 With the super6 and UE diffs your gearing goes back to normal. With the picco .21 I would try 21T/70T My diff problems are over - olds97_lss - 04-28-2006 RC-Solutions spur, OFNA bell, 1/8 flywheel and clutch shoes. Spurs: 54T, 52T Bells: 15T, 16T, 17T, 18T Flywheel and Shoes I used: Flywheel, Shoes Umm... wait, I didn't notice, is this a 21 chassis maxx or a standard chassis? If it's not a 21 chassis, then you can't go with an 1/8th style clutch (not enough room) and totally ignore me. Well, you can ignore me either way, but I used this setup and it worked really well.