+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Tech Forums (https://www.chitownrc.com/forum-7.html)
+--- Forum: Engine / Drivetrain (https://www.chitownrc.com/forum-17.html)
+--- Thread: Carb Help (/thread-6012.html)
Pages:
1
2
Carb Help - Rawkfist_02 - 02-17-2007
My Hot Bodies .26 carb is blown, I have a force carb ans she wont fit. So what do I do? I cant find the demensions for the carb. Any one know a carb that will fit.
Carb Help - dentguy92 - 02-17-2007
how do you blow-up a carb????????
Carb Help - BAMF90 - 02-17-2007
http://cgi.ebay.com/Hot-Bodies-Slide-Carburetor-Complete-Set-26-HBS28515_W0QQitemZ250079799388QQihZ015QQcategoryZ34063QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
That's a new Hot Bodies .26 Carburetor. You'll have to spend quite a lot on it though.
Carb Help - rocco79 - 02-17-2007
yeah, how go you blow a carb?
Carb Help - BAMF90 - 02-17-2007
I was wondering the same thing.:confused:
Carb Help - dentguy92 - 02-17-2007
BAMF90 Wrote:http://cgi.ebay.com/Hot-Bodies-Slide-Carburetor-Complete-Set-26-HBS28515_W0QQitemZ250079799388QQihZ015QQcategoryZ34063QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
That's a new Hot Bodies .26 Carburetor. You'll have to spend quite a lot on it though.
you can get a new engine for about $20 more
Carb Help - BAMF90 - 02-17-2007
I know. I was about to say that too, but it seems that would be obvious.
Carb Help - rocco79 - 02-17-2007
Yeah... Dont bother fixing that motor bro....
WHat problem are you having?
Carb Help - SEEKandDESTROY2 - 02-17-2007
The slide has alot of play, The HSN backs out all the way everytime he runs and the idle wont go down because the slide has alot of friction from the barrel always being rotated different then how its suppose to be and it doesn't allow it to close all the way.
-Pete
Carb Help - rocco79 - 02-17-2007
so the neck of the motor where you insert the carb is rotating?. I personally wouldnt buy a carb for it....
Look for another rtr motor on ebay cheap
It your dead set on fixing it. Try finding a blown or used savage 25. They have a desent carb that should fit ....
Carb Help - SEEKandDESTROY2 - 02-17-2007
We'll probably just end up finding a used BB for him to run instead of this hot bodies.
-Pete
Carb Help - Ponch - 02-17-2007
Well the HSN needs new o-rings... Not sure what to do on the other parts.
Carb Help - rocco79 - 02-17-2007
not worth even trying to fix...
Carb Help - Ponch - 02-17-2007
Nope not at all, just saying.
Carb Help - SEEKandDESTROY2 - 02-17-2007
Yeah its not that great of a carb. Probably just keep the motor as a spare and get something nicer.
-Pete
Carb Help - Czech-it-Out Graphics - 02-17-2007
see whatd i tell u dump that pile and get something new
Carb Help - dentguy92 - 02-17-2007
Mike your such a dick......
Carb Help - Czech-it-Out Graphics - 02-17-2007
lmao wow thanks JB
Carb Help - Rawkfist_02 - 02-18-2007
Wow, ok guys. I am 100% running this mill untill spring when I have my job and can go buy engines. Unless someone wants to through me a new engine. This one has perfect compression and runs like a champ, theres no need to change for a better one right now.
So basically the idle is way to high, so you loosen the idle screw. Then the screw isent touching the carb's slide shaft. Making it spin freely. What If i dremel a little further down the shaft so the carb will close further. Even though the idle screw is touching the shaft now.
Carb Help - AddictedtoNITRO - 02-18-2007
wow dremel and a carb dosn't sound good man. do what rocco said try finding a blown savage 25 carb.
Carb Help - Astro - 02-18-2007
http://cgi.ebay.com/NIB-OEM-SH-21-Buggy-Engine-ABC-W-Pullstart-2-4hp-RTR_W0QQitemZ190073974039QQihZ009QQcategoryZ34062QQcmdZViewItem
Carb Help - SEEKandDESTROY2 - 02-18-2007
Thats a deal right there
Carb Help - Rawkfist_02 - 02-18-2007
Maybe soon...
But I found a HPI .21 for $20 shipped. THe whole engine, and she runs. Would that carb fit if theres something wrong with the piston.
Carb Help - rocco79 - 02-18-2007
its a three needle carb just so you know
Carb Help - Rawkfist_02 - 02-18-2007
OMG are u serious.