+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Tech Forums (https://www.chitownrc.com/forum-7.html)
+--- Forum: Engine / Drivetrain (https://www.chitownrc.com/forum-17.html)
+--- Thread: lsp break in (/thread-6238.html)
lsp break in - AddictedtoNITRO - 03-10-2007
ok guys. What is the best way to break in a n engine. I have always broke mine in the traxxas way but everyone here thinks traxxas is junk so I was wondering if there is a good way to do it. I don't know the if the Hot Bodies way is ok. It says tank1 sit and idle out, tank2-4 lean out 1/4 turn and drive it around for the whole tank. That idleing out thing I tried before. It keeps loading up and wants to die how do you keep it running without hittin the gas?
Thanks for all the advice.
Jeff
lsp break in - Czech-it-Out Graphics - 03-10-2007
get it up to temp (around 200 ATLEAST) and run it for about 3-4 and shut it off and let it cool down Do this about 5-6 times. Keep ROLLING the throttle no blipping and keep it around half to quarter throttle and keep driving it around. Once you do that start running full tanks through I would say another 5-6 tanks and after about 2 full tanks u can start leaning it out here and there an start making it up to full throttle but dont stay there to long....hope that makes sense
lsp break in - rocco79 - 03-10-2007
the heat cycle method is pretty much what czech just described... IMO it is pretty much the industry standard for break-in
lsp break in - maxximum_44 - 03-10-2007
http://www.rcuniverse.com/magazine/article_display.cfm?article_id=397 More info
lsp break in - Hoobajoob - 03-10-2007
FULL THROTTLE THAT YOTCH ALL THE WAY! lol
lsp break in - FreeRideFrosty - 03-10-2007
When are you breaking it in?? I will be breaking my motor in the 16th or 17th..... hopefully all goes well before the race on the 19th. Haha
lsp break in - motoxer4life - 03-10-2007
hey were you the guy at the track today with your new werks engine right across from us with the electric xxx-t?
lsp break in - Ponch - 03-10-2007
Dan's down south right now...so no...
lsp break in - FreeRideFrosty - 03-10-2007
motoxer4life Wrote:hey were you the guy at the track today with your new werks engine right across from us with the electric xxx-t?
Negative. Down at U of I for one more week. :-)
lsp break in - motoxer4life - 03-10-2007
not you, addictedtonitro.
lsp break in - AddictedtoNITRO - 03-10-2007
no I was at work today. Probably breaking it in tomorrow afternoon.
lsp break in - AddictedtoNITRO - 03-11-2007
How much longer will the engine last (tuned properly) doing the heat cycle method compared to say the traxxas way or the os way?
lsp break in - bubbaracing - 03-11-2007
As long as you don't overheat it it should last a long time? That XTM 24.7 in my Savage lasted 15 gallons! I told you it was 10 gal but talked to my buddy and he said 15 gallons!! You got that thing broke in yet or what?? Got the Mutilator all broke in today! You want some of it now or later!! LMFAO!! j/k:bustingup
lsp break in - Tex - 03-12-2007
Here's my break in method
heat up the motor to 200F + (before attempting to start it)
Drive the first tank pretty soft
second tank a little faster
by tank three I'm hitting full throttle but let off right away and be smooth with the trigger finger
4th tank race tune it
lsp break in - AddictedtoNITRO - 03-12-2007
tex how long the motors lasting that way?
lsp break in - DAVEC-NITRO-RS4 - 03-12-2007
In any method....make sure a cooling cycle is done with the piston at bottom of the stroke. Look down the plug hole to find bottom, mark the flywheel and then use that mark to rotate the engine when it's off.
lsp break in - AddictedtoNITRO - 03-12-2007
thanks everyone. I broke it in all correctly. usisng actually a little more time to make sure it was good. I'm having trouble regulating temps now. I have tried everything I can think of. One run it'll be great at 215 and I'll let it cool off 20 mins later run it agail and 1/3 way thru the tank she'll hit 265 and I gotta kill it fast. I have already contacted hot bodies about it. Just like to ad that they are supper fast with replies to the concerns. wish me luck. Hoping that it'll work itself out or I'll be plenty pissed if I have to get a new motor!
lsp break in - AddictedtoNITRO - 03-12-2007
ok so Hot bodies told me that it is normal for this engine to run 240-270. Sound logical? I've always heard 240 MAXX
lsp break in - Czech-it-Out Graphics - 03-12-2007
there is no such thing as maxx temp (within reason of course) if it runs good with good smoke at 280 leave it 240-260 is always a good temp for hot summer weather. Indoor when its cold 200-230 is usually about normal
lsp break in - AddictedtoNITRO - 03-12-2007
It runs good but keeps going up lol. There isn't a ton of smoke even super rich maybe it's the pipe idk. I just wish I could find a right spot lol
lsp break in - Czech-it-Out Graphics - 03-12-2007
if the temp keeps going up u might be a little lean on the bottom, try the pinch test should be around 2-4 seconds
lsp break in - rocco79 - 03-12-2007
the motor might still have alot of metal pinch... Untill thats gone you may see a spike in temps
lsp break in - UE-Maxx - 03-12-2007
About the smoke concern, when I am just running in front of my house (break-in) it is hard to see the smoke even if there is a lot. I don't know if it is too bright out or the color of the street or what.
lsp break in - AddictedtoNITRO - 03-12-2007
rocco79 Wrote:the motor might still have alot of metal pinch... Untill thats gone you may see a spike in tempsYea I can not turn it over by hand on the flwheel
I'll check the lsn thought it was good we had I belive about 2-3 but I'll recheck. honestly I did not know it had anything to do with temps. thought it was taking off and idling
lsp break in - AddictedtoNITRO - 03-12-2007
is that 2-4 at the carb or down further in the line mike?