ChitownRC
F/S STS 28 w/header & pipe - Printable Version

+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Open Forums (https://www.chitownrc.com/forum-5.html)
+--- Forum: Buy / Sell / Trade (https://www.chitownrc.com/forum-13.html)
+--- Thread: F/S STS 28 w/header & pipe (/thread-6723.html)

F/S STS 28 w/header & pipe - Biodragen - 04-17-2007

For sale is an STS .28 with matching header and pipe.
This motor has been very good to me. It holds a tune and is easy to get it tuned.
I did break in according to directions which was about a gallon total.
I have 4 gallons of racing on it in addition. After each gallon I dissasembled the motor for inspection and each time it looks beautiful.
I had gotten 11:20 for 150 cc of fuel and I ran nothing but Byrons 30%
I was maticulous about taking care of this motor.
This is set up for bump box.
This had no problem clearing the triple (and then some without a long running start) after the berm on the outdoor track.
I kept my temp on this no higher then 240 but was typical around 230-235 at best performance using SH med plugs after mains. I have gone through 4 plugs since it saw fuel.

Asking $80 for all of it which is a good deal IMO


[Image: motor1.JPG]
[Image: motor2.JPG]
[Image: motor3.JPG]
[Image: pipe.JPG]

F/S STS 28 w/header & pipe - Czech-it-Out Graphics - 04-17-2007

temped at 140 eh? lol

F/S STS 28 w/header & pipe - Biodragen - 04-17-2007

-

F/S STS 28 w/header & pipe - Biodragen - 04-17-2007

Czech-it-Out Graphics Wrote:temped at 140 eh? lol

LOL
I fixed that
Nice catch

F/S STS 28 w/header & pipe - Meatwad - 04-17-2007

11 minutes outdoor is really good

F/S STS 28 w/header & pipe - rocco79 - 04-17-2007

Meatwad...

I believe outdoor.... As he says outdoor in his post.

F/S STS 28 w/header & pipe - Biodragen - 04-17-2007

Yep
Indoor I got 12:20 ish
This mill was very good to me
I just upped to higher end mills and don't need this one or have anything to put it in

F/S STS 28 w/header & pipe - GWPHOENIX - 04-18-2007

back up would be advised. LOL

but I can say that i've seen this mill in action. VERY NICE!!

F/S STS 28 w/header & pipe - Biodragen - 04-18-2007

I have two mills for my truggy.
This is a third, how many back ups you suggest???
You only have the one mill

F/S STS 28 w/header & pipe - Meatwad - 04-18-2007

ygpm

F/S STS 28 w/header & pipe - Biodragen - 04-18-2007

back at ya

F/S STS 28 w/header & pipe - GWPHOENIX - 04-18-2007

Did you forget I have the O.S. RG to back up my RB! LOL

F/S STS 28 w/header & pipe - Biodragen - 04-18-2007

No because you have it in the other buggy
So you have two buggies and two motors---where is the back up now---lolWhen you are at the track with the 8
and leave the other buggy at home you have no back up.

I have mine ready to swap

F/S STS 28 w/header & pipe - Biodragen - 04-20-2007

TTT

I will be at LHR Sunday

F/S STS 28 w/header & pipe - GWPHOENIX - 04-20-2007

damm, busted again