+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html)
+--- Thread: Mayhem steering servo (/thread-679.html)
Mayhem steering servo - RCDad - 06-28-2005
The stock steering servo acts alot like a maxx, has trouble turning from a dead stop, it works fine while the buggy is rolling. I'm just curious how that will effect turning on a track.
Mayhem steering servo - thenewguy821 - 06-28-2005
That will not affect handling on a track. The Mayhem steers great on the track. If you want, you can tighten the servo saver a little. On the right side steering post, there is a threaded collar, that is how you tighten or loosen the steering servo saver.
I forget if I had a JR 590 servo on that, or a Hitec 645 for steering, but either one is fine.
Mayhem steering servo - RCDad - 06-28-2005
I've got a hitec 645 on my pede, I wonder if I should swap them, I'm sure the Mayhem servo has to be much stronger than a stock pede.
Mayhem steering servo - thenewguy821 - 06-28-2005
The 590 JR servo is 80 oz, which is good for a buggy, but the Hitec would be a little stronger.