Revo Center Diff / Tire Balooning - Printable Version +- ChitownRC (https://www.chitownrc.com) +-- Forum: Tech Forums (https://www.chitownrc.com/forum-7.html) +--- Forum: Chassis / Suspension (https://www.chitownrc.com/forum-18.html) +--- Thread: Revo Center Diff / Tire Balooning (/thread-7172.html) |
Revo Center Diff / Tire Balooning - J-Dub - 06-06-2007 I just upgraded to 300k Center Diff in my Revo from 100 to help dampen tire balooning. It's better...but it still does it. My Foams are SHOT probably just by feeling the tires could that have an impact on that too or is it unrelated? (I probably know the answer to the question I just don't wanna try and get all the tires off the rims to replace the foams) Revo Center Diff / Tire Balooning - Czech-it-Out Graphics - 06-06-2007 what do you mean just by feeling the tires? Revo Center Diff / Tire Balooning - Meatwad - 06-07-2007 go to 500K Revo Center Diff / Tire Balooning - J-Dub - 06-07-2007 czech, they are quite squishy the foams are shot. I was wondering if the lack of firmness anywhere in the tire could cause ballooning. I think I was allergic to puncuation there... I was thinking of going up to 500k. Im still running the short Chassis, would a long Chassis help that issue too? 300k is god awful, I just kind of scoop it and pack it in with my fingers. I don't really wanna know what 500k is like. Lol Revo Center Diff / Tire Balooning - Ponch - 06-07-2007 You have to remember....That kind of IS the purpose of a center diff-to diffuse an amount of the power to the wheels lacking traction... If you do not want any ballooning difference between front and rear, go back to the transmission. Revo Center Diff / Tire Balooning - Meatwad - 06-07-2007 the longer chassis would increase traction to the front tires, which should stop them from balloning. Revo Center Diff / Tire Balooning - hansarvin - 06-07-2007 and even with the 3.3 chassis you would need to go up to 500K. anything below that is about useless. Revo Center Diff / Tire Balooning - J-Dub - 06-07-2007 I'll try 500k next...I'd rather not have to spend 100 bucks to upgrade to the longer chassis if I don't have to. I like my turning radius with the short one. Revo Center Diff / Tire Balooning - J-Dub - 06-07-2007 Ponch Wrote:You have to remember....That kind of IS the purpose of a center diff-to diffuse an amount of the power to the wheels lacking traction... If you do not want any ballooning difference between front and rear, go back to the transmission. Well the tire ballooning is rather excessive, I think...Im not sure i havnt had it on the track. Just the road...we'll see. I think I ought to replace the foams if i can save the tires. Also...another question. is the 23mm velocity 1/2" offset rims more durable against bending than the standard ones? Cause if I carthweel it just right it bends the hub so its way out of wack. Just curious... Revo Center Diff / Tire Balooning - Czech-it-Out Graphics - 06-07-2007 dont cart wheel lol the foams have nothing to do with ballooning if anything its going to cause less ballooning because there is less rotating mass forced against the ruber with a broken down foam. the foam broke down because its not stuck to the rim so it balloons aswell. try 500k and it should help but u will prolly get more rear wheel spin Revo Center Diff / Tire Balooning - J-Dub - 06-07-2007 I'll go run it at the track and see what it does. Revo Center Diff / Tire Balooning - Mr. Tune - 06-07-2007 You could always strap the tires too. Revo Center Diff / Tire Balooning - J-Dub - 06-07-2007 Mr. Tune Wrote:You could always strap the tires too. Strap like...put some Duct Tape on the inside of them? Revo Center Diff / Tire Balooning - Czech-it-Out Graphics - 06-07-2007 packing tape the shit with the fibers running through it turn the tire inside out and rap the center, not gonna handle as good tho Revo Center Diff / Tire Balooning - J-Dub - 06-07-2007 I think I'll just see what it does before I do anything drastic. I so hate getting tires off of rims. |