+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Tech Forums (https://www.chitownrc.com/forum-7.html)
+--- Forum: Engine / Drivetrain (https://www.chitownrc.com/forum-17.html)
+--- Thread: Magnesium vs. aluminum for cooling heads (/thread-7951.html)
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
close plz
Magnesium vs. aluminum for cooling heads - dentguy92 - 11-07-2007
mag. will pull heat better than alum. the head will be hotter over the whole head but will not be as hot at the glow plug...
Magnesium vs. aluminum for cooling heads - allan42r - 11-07-2007
they will both look good and last a long time on the bench.lol its a fad, dont know who started it but im sure it was an effort to reduce weight. the os speed comes in both now. and no mag has less memory than alum. at the nats no one was running the mag heads, cant get the rpms out of the motor on warm days with a poor cooling head. os had the same problem when they came out with the cv 12 that had a red square head but as soon as you put a better cooling head on it like the odonnell it was fast. i had the mr tuned motors at the nats and we put the alum head on. in cooler temps this head will work in fact ira runs onroad and perfers the mag head. so i guess the higher speeds keep the motor cool.
Magnesium vs. aluminum for cooling heads - allan42r - 11-07-2007
rb,adam drake,os,ninja none of these motors ran the mag heads because they do not cool the motor as well as the alum. i ran both on the same day on the same motor.
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
allan42r Wrote:they will both look good and last a long time on the bench.lol
I dont own a bench dumb ass, and ty for your smart ass remarks as always
Magnesium vs. aluminum for cooling heads - allan42r - 11-07-2007
pwnzor Wrote:I dont own a bench dumb ass, and ty for your smart ass remarks as alwayswhats ty? and i did give you some info
Magnesium vs. aluminum for cooling heads - allan42r - 11-07-2007
and another thing, your avatar looks better. oh boy im off topic again.lol
Magnesium vs. aluminum for cooling heads - DAVEC-NITRO-RS4 - 11-07-2007
ty= thank you
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
you are a big dumb nerd Al
Close Plz, and I am about done posting here, not that anyone cares or it will matter, I should have made the topic on tech, then I would not have people slamming me because im not a full fledged hardcore racer, I know its all in fun, but im sick of it and its the same repetetive bs, ruined thread after ruined thread ALWAYS because of some big timer.
Magnesium vs. aluminum for cooling heads - allan42r - 11-07-2007
f u dickhead i gave you info on what your topic was. no humor when it comes to the big talking k non driver. and no lol f off you are a piece of shit
Magnesium vs. aluminum for cooling heads - allan42r - 11-07-2007
im done!
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
big talking? im asking for help here dude, instead you slam me because Im not a racer like you are.......you need to step back into reality, and away from the pc and rc tracks/cars for a while, you are a sick/disgusting man, and a DISGRACE to any manufacturer in this industry.
Magnesium vs. aluminum for cooling heads - Czech-it-Out Graphics - 11-07-2007
:popcorn: beer here? anybody got a beer? man i wish i didnt have to goto class dont wanna miss the rest of this soap opera!
Magnesium vs. aluminum for cooling heads - dentguy92 - 11-07-2007
WOW that was interesting
Magnesium vs. aluminum for cooling heads - chickenfarmer3 - 11-07-2007
Wow!
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
no kidding
Magnesium vs. aluminum for cooling heads - FreeRideFrosty - 11-07-2007
I didn't see anything terribly wrong with the reply.....
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
nah nothing terrible, im just going to ignore him from here on out
Magnesium vs. aluminum for cooling heads - rocco79 - 11-07-2007
What the F' just happened here?!? Trevor... Seriously man... You are like ultra super mega sensitive lately. If you dont wnna post here then fine, dont post. Nobody is begging you too stay. I didnt see anywhere you were "hasseled" for not being a racer.
I dont want you to leave but i think you need to relax and not take this board or H O B B Y so serious
Al you are a huge off topic poster but i dont think you were in this thread at all.
Just more grown man pissy pants BS... it so pathetic i dont even care. I didnt know you had to have paper thin skin and wear your heart on your sleeve to race r/c. ( And this isnt directed at trev, this applies to 98% of this board 30+ and up!!!!) Man... Looks like i need to go get another fresh truckload of eggshells for everyone to walk on .
The overactive vagina nerves on this board amazes me...
And the only person who edits this post better be the owner of the site... because there is nothing wrong with what im saying.
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
yes, I am f'ing sensitive right now.
Magnesium vs. aluminum for cooling heads - rocco79 - 11-07-2007
Thats fine! Lord knows i cant stand a few people that post here too... Well atleast they used too... You cant like everyone or theyre opinions.
And trev, reread my 1st post i edited it some
Magnesium vs. aluminum for cooling heads - pwnzor - 11-07-2007
its all good Rocco, I got some issues going on man, I think I need to step back myself.
Magnesium vs. aluminum for cooling heads - moliver - 11-07-2007
rocco79 Wrote:And the only person who edits this post better be the owner of the site... because there is nothing wrong with what im saying.
As a mod, why didn't you just close the tread as was requested? No need to add fuel to the fire.
Magnesium vs. aluminum for cooling heads - cheesecake - 11-07-2007
moliver Wrote:As a mod, why didn't you just close the tread as was requested? No need to add fuel to the fire.
some times it allows people to realize they need to calm down i think rocco did the right thing here
Magnesium vs. aluminum for cooling heads - Czech-it-Out Graphics - 11-07-2007
rocco is totally right, what ever happened to the good old days roc? Guys talking shit to each other non stop online, at the track, whenever, and at the end of the day everybody was still tight and it was fun to do. now you say one thing about a car, a tire, a glow plug, and people get offended and almost have a stroke. Used to be all fun and games, a relaxing hobby, now every where you go you gotta screen every word you say to make sure nobody gets butt hurt....what happened roc?