Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hot Bodies Lightning Stadium Pro...almost RTR
#1
Hey everyone, i'm selling my Hot Bodies LSP truggy. The truggy has all sorts of hop up on it. I've owned the truggy for about 4 months now and some things have come up that I wasn't expecting (like needing a real car haha) and I've gotta get rid of it. The truggy is so close to being RTR. The only thing it doesnt come with is an engine and starter box. It come's with a Spektrum SR3500 micro racing reciever that you may or may not use. I just no longer have any use for it so that's why it's going with the truggy. So if you have a Spektrum Radio then you don't even need any electronics. I'll include the bind plug which you can use to bind to your transmitter. Here is a list of all the hop-ups and other odd's and ends that come with the truggy.


Hot Bodies Lightning Stadium Pro-R
Here's the list............
Hot Bodies 7075 chassis upgrade (stock one included)
Hot Bodies CNC finned engine mounts
Hot Bodies CNC pipe mount
Hot Bodies doubled up rear anti squat plates
King Headz front hinge pin holder
Racers Edge aluminum rear toe block set
Racers Edge aluminum shock ends
Racers Edge big fuel filters (2)
OFNA 150cc fuel tank mod (stock one included)

Vertigo Performance Quasi Fiber (carbon fiber) full kit includes...
front & rear shock towers
front & rear chassis braces
diff plate
servo plate
disc brakes
steering drag link
(This kit alone was $150)

Panther Boa tires
Racers Edge two stage foams
Proline Velocity wheels
(this wheel/tire set only has one indoor race on them and cost almost $100)

MISC...
Jammin JP-2 pipe
Hitec 5955 Steering Servo
Hitec 5625 Throttle Servo
OS 203 Super Air Filter w/ extra filter element
Spektrum SR3500 Micro Racing Reciever
1100mah NiMH battery pack


It will come with a used HPI Dodge ram body, a stock LSP body that has never been raced, a white Proline wing, a gunmetal color wing, two extra Hot Bodies CNC knuckles, a bag full of extra parts including c-hubs, rear hubs, wing mount parts and so on, all the stock aluminum parts that were replaced with the Vertigo kit and Im sure there is more Im forgetting......




And last but not least here are some pics:
[Image: IMG_1030.jpg]
[Image: IMG_1033.jpg]
[Image: IMG_1035.jpg]
[Image: IMG_1040.jpg]
[Image: IMG_1048.jpg]
[Image: IMG_1050.jpg]
[Image: IMG_1051.jpg]
[Image: IMG_1056.jpg]
[Image: IMG_1058.jpg]
[Image: IMG_1061.jpg]
[Image: IMG_1062.jpg]

The last three pictures show the very small normal use scratches that are on the bottom of the chassis. The scratches aren't even 1mm deep just surface stuff. This truggy hasn't even been an abused basher. It was a racer for 2 seasons and I basically broke it in and thats it.

I am asking $450 shipped for the truggy with all the extras on the list and everything you see in the pictures. Let me know if you want it...either IM me at yearone68 or shoot me a PM orrrr post in this thread.
Reply
#2
Is this Eric's old Truggy??
Reply
#3
Sure looks like it
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#4
If eric is Eracer76 then yes. I bought it off of him about 4-5 months ago off this forum. The truggy ran amazingly but some thing's have come up and I need the cash now more then anything. He kept the truggy in great condition and so did I. I've done nothing to it but only add on the extra's needed to make it run. It's a great truggy and I hope I get it sold soon
Reply
#5
Sure is my old one...
Doesnt even look like you ran it!
I had alot into that truck....shock towers, disc brakes, king headz front hinge pin holder, OFNA tank upgrade,
7075 chassis upgrade, just to name a few more you forgot to mention Wink

Good luck on the sale, hope everything works out for ya.
Kyosho ST-R
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos

Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos

Kyosho Inferno GT
SH .28
Reply
#6
Thanks man..yeah I hardly did run it...only for 3 tanks plus break in and they were all take it easy tanks. This thing is hopped up to high heavens and I hope the sale works out for me or else i might have to part it out
Reply
#7
Wassup with the 2 chassis? Is one extended?
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
#8
They are both the same lenght one is stock the other is 7075
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#9
Thank you Rocco. yeah the chassis on the truggy now is just a 7075 chassis
Reply
#10
In an honest opinion, this will never sell for that price. I am not trying to be mean at all just honest. Iknow that there is more than that in it, but it is an outdated truggy. Hopped up CRT's are nto even going for whatyour asking. The market is really bad right now especially for older truggies. With the new mugen, the losi 8 comming out this just makes this ruig farther down the food chain of truggies.

My suggestion would be take the hop ups off and sell seperatly and get the roller as close to stock as possible, and sell it that way. You will get the most out of it that way.

Once again just offering advice, and good luck with your sale in what ever you decide.
A friend will help you move, but a REAL friend will help you move a body.
Reply
#11
the truck that started it all lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#12
Czech-it-Out Graphics Wrote:the truck that started it all lol

Thats the truth too....
JT was the first one to get one at the old LH raceway....then I think I was second...
It was me and him battling it out on Saturday nights leaving the rest of the MT's 2-3 laps down lol....the good ol' days Big Grin
Kyosho ST-R
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos

Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos

Kyosho Inferno GT
SH .28
Reply
#13
dont forget about matty gosch he really made this class come to life
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#14
+1 to the above
[Image: mich1iy1.jpg]
Reply
#15
I like the LSP. It is outdated though. I say it is best for a basher and casual racer. They are strong as hell! (Don't slide into the wall at the end of the straight when they just water the track though..... you'll brake a knuckle ever time. LoL)
Reply
#16
FreeRideFrosty Wrote:I like the LSP. It is outdated though. I say it is best for a basher and casual racer. They are strong as hell! (Don't slide into the wall at the end of the straight when they just water the track though..... you'll brake a knuckle ever time. LoL)
I think you meant a c-hub, not a knuckle Wink
The truck above still has the stock 7075 knuckles on it Smile
Kyosho ST-R
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos

Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos

Kyosho Inferno GT
SH .28
Reply
#17
Eracer76 Wrote:I think you meant a c-hub, not a knuckle Wink
The truck above still has the stock 7075 knuckles on it Smile


:o: It's been a while.... LoL
Reply
#18
Yeah i'll most likely part it out...but i'm gonna let it sit here for a little bit longer
Reply
#19
I'm taking offers now...let me know if u got anything
Reply
#20
sold
Reply
#21
Ill buy that receiver and JP2 if your selling it. Good job selling it too, that is one good lookin truck. George was wrong again!! Wink
T-T-T Confusedalute:
Reply
#22
yea it was nice if I had the cash would of made a decent first truggy
LOVE AMERICA OR GET THE HELL OUT!
www.Suburbanchicagorockcrawlers.com
www.Keyknivesonline.com
www.rcslot.com
rc crawling headquarters and great customer support!
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Hot Bodies tires/wheels BIG! Swap 4 Slash stuff. TexMexSu 8 4,336 04-01-2010, 05:46 AM
Last Post: TexMexSu
  mugen seiki mst-1 stadium truck chassis grim digger 0 1,705 09-28-2009, 11:59 AM
Last Post: grim digger
  Lightning Stadium Pro truggy eraser 1 1,878 06-10-2009, 03:20 PM
Last Post: grim digger
  F/S - Evader ST Electric Powered RTR Stadium Truck from DuraTrax ElecTruckFS 6 2,127 06-26-2007, 05:18 PM
Last Post: blktransam
  FS-Hotbodies Lightning Stadium Arms PT#C8158 Ponch 1 1,219 06-11-2007, 01:41 PM
Last Post: Ponch
  FS: Hot Bodies LSP Pro-R $250. Thirdgen89GTA 0 964 06-03-2007, 11:47 PM
Last Post: Thirdgen89GTA
  Wanted, cheap elec stadium truck roller! bubbaracing 14 2,996 04-17-2007, 11:49 PM
Last Post: Jeepguy
  For sale- Maxx/savage/etc bodies t to the maxx2 0 746 04-16-2007, 03:38 PM
Last Post: t to the maxx2
  Hot Bodies Race LSP-R for sale !!! sold!!! Rob Kass 17 3,430 03-01-2007, 05:16 PM
Last Post: rocco79
  bodies for sale SLOW REVO 35 6,563 02-05-2007, 12:54 PM
Last Post: SLOW REVO

Forum Jump:


Users browsing this thread: 1 Guest(s)