Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Truggy Motor
#26
Fine.... I pulled the trigger this time. I am buying ORC's motor. I think it will work just fine for me. :-D
Reply
#27
You're offfically on your way to breaking stuff faster than ever!!
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#28
Haha.... if anything it should help. No more coming up short or awkward on something I should be clearing. Now I only need a pipe, tank, knuckles, wheels and tires.... the expensive part is done. LoL Oh, and a screw kit.
Reply
#29
now ponch has nothing on you.
The worst dirtbiker is always one step ahead of even the best quad rider....

Tex Wrote:WTF, racing ranger 2?????? and racing ranger 1???? #2 needs his ass kicked for taking someone elses name.
Reply
#30
Racin' Ranger1 Wrote:now ponch has nothing on you.

Ponch didn't have anything on me before except for track time. If he was running on Thursday it would have been quite different. We will see this outdoor season. (When I will need to learn to drive all over again.)
Reply
#31
Racin' Ranger1 Wrote:now ponch has nothing on you.


Did he ever?

Dang, same time.
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#32
Dan-

This is the email to a guy named darrell ... Hes from NW indy. He had a very blinged lsp but now runs a jammin. If i were you id hit him up and see if he has any of those parts on your list...
Ive met him before and trust me if youve ever been on the grid he is a VERY honest (Angel ) guy....

he changes cars like underware you im sure he can hook you up...
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#33
not to mention he has enough stuff to start a small hobby shop.....LOL

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
#34
++++++1 chad!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#35
ya but hes a cardinals fan!!! ewwwww
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#36
and a Michigan fan! double ewwww! LOL!!!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#37
rocco79 Wrote:Dan-

This is the email to a guy named darrell ... Hes from NW indy. He had a very blinged lsp but now runs a jammin. If i were you id hit him up and see if he has any of those parts on your list...
Ive met him before and trust me if youve ever been on the grid he is a VERY honest (Angel ) guy....

he changes cars like underware you im sure he can hook you up...


Where is the e-mail??:confused:
Reply
#38
FreeRideFrosty Wrote:Where is the e-mail??:confused:
Looks like your sig applies to someone else here!!!!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#39
squirrel Wrote:Looks like your sig applies to someone else here!!!!

No.... I really don't see an e-mail in that reply. :confused:
Reply
#40
[email protected]
Sorry i thought i put it in there.... Huh, weird. Well there it is!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#41
The 528xsp is comparable to the OS30vg in terms of performance, with the OS30vg having slightly more top end. I've had a chance to compare with john (Six V6) here in several drag races and the 30vg usually out ran his buggy.

It was my buggy a Jammin X1cr w/30vg and jp3 pipe, against his K3 w/528xsp and a NR pipe (not sure which nr pipe) John would have more info on that.

Thats not to say I dominated his buggy, the cars were very close but the 30vg would walk away after about 200ft. Explosive is the way I would put the powerband. At Monster Jam the surface so was so rough the buggy would bounce everywhere as the ruts were as tall as the tires sometimes. But every time those wheels hit the ground the buggy was an absolute rocket. The surface was so rought that slamming on the brakes was usually enough to send me into endo's nose first.

_________________________

I know you are using it in a truggy but the two motors were in similar vehicles so a comparison worked there.

The 528xr would dominate my 30vg, no contest. The low-end is about the same with the 30vg possibly having even more torque, but the 528xr just kept on screaming, screaming right past where the 30vg would stop pulling.
Reply
#42
Thanks for the comparison. Close enough for me.
Reply
#43
well?
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#44
Well what??

I am buying ORC's Rossi and I e-mailed Darrell just now.
Reply
#45
ok
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#46
Haha. Allright then. Thanks Rocco. :-)
Reply
#47
i think thats what he was lookin for lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#48
Czech-it-Out Graphics Wrote:i think thats what he was lookin for lol

I JUST e-mailed him and hadn't gotten a chance to say thanks. I wasn't sure if I missed something else or not....Wink
Reply
#49
Good luck with the engine. I remember my 8 port in my lsp, man that thing was an insane animal.....


"Takin the train"
A friend will help you move, but a REAL friend will help you move a body.
Reply
#50
ya that was "the" engine to get for a long time when the truggy scence first made its debut

takin the train
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  GV Shark 4WD 1/10 - Powerfull motor installed but power lost in transmition system Antreas 1 3,685 12-09-2010, 10:08 AM
Last Post: Antreas
  Jammin CRT.5 Minni Truggy? Agd123 5 3,006 08-06-2008, 09:05 AM
Last Post: Tex
  Revo, a race truggy? snoracer 61 14,533 02-13-2008, 05:27 PM
Last Post: J-Dub
  motor liam 9 3,327 01-27-2008, 03:57 PM
Last Post: DAVEC-NITRO-RS4
  What Motor? snoracer 42 9,504 01-20-2008, 08:37 PM
Last Post: Eddie F
  Indoor Tires. Truggy, Boas And Holeshots? or just Boa J-Dub 9 3,055 01-15-2008, 01:02 PM
Last Post: J-Dub
  $300 rtr truggy for the beginners. DAVEC-NITRO-RS4 5 2,466 10-21-2007, 09:45 PM
Last Post: rocco79
  Possible AE truggy? Evil3 94 14,592 08-14-2007, 11:31 PM
Last Post: J-Dub
  Which tires for Truggy outdoor? motoxer4life 23 5,913 08-06-2007, 03:29 PM
Last Post: motoxer4life
  What truggy as a basher? motoxer4life 198 34,845 07-19-2007, 08:21 AM
Last Post: motoxer4life

Forum Jump:


Users browsing this thread: 1 Guest(s)