Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Vent Tires or Wheels??
#1
Well all my goodies came from Slow Revo today (Thanks!!). I am going to glue up the wheels and tires. They are for indoor, and the wheel is vented already from the factory. Do I need to vent the tire or no? I am pretty sure that venting the tires is for outdoor only, but I am not 100% sure.

Thanks
Dan
Reply
#2
tires 4 holes
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#3
unless u do big ones then two but id stick with more of a smaller whole^
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#4
ORL?? Hmmm... Allright then. About how big on the 4 holes?? Like the size of a headphone jack?
Reply
#5
Czech-it-Out Graphics Wrote:like the size of a M3.5 screw


Beceause I know EXACTLY what that is without a scre kit here. Haha.... I'm retarded remember?? Compare it to something I probably have siting on my desk right now. Haha
Reply
#6
how bout a 2.5 hex driver?
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#7
Funny that that would be the exact same size as a headphone plug. Hahaha....
Reply
#8
I don't think tires need to be vented for indoor use. It's not like it's dusty inside, lol.
Reply
#9
Mr. Tune Wrote:I don't think tires need to be vented for indoor use. It's not like it's dusty inside, lol.


See that is what I thought.:confused:
Reply
#10
u wash ur tires dont u dimo? waters gotta get out some how and the only way out is through the rubber dan the head phone jack from my I pod is smaller than that lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#11
Czech-it-Out Graphics Wrote:u wash ur tires dont u dimo? waters gotta get out some how and the only way out is through the rubber dan the head phone jack from my I pod is smaller than that lol

I know that I don't wash my tires. Now you say they won't swell as much when vented. Why? The rim is vented and I don't see wht it would make a difference in them swelling under acceleration. If anything I could see it being worse. Aren't I more likely to tear a tire when they are vented as well??
Reply
#12
Indoor-No tire vents
Outdoor-Tire vents
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#13
Ponch Wrote:Indoor-No tire vents
Outdoor-Tire vents


No vent: 1.5 votes (Ponch only counts for 1/2)
Vent: 1 vote
Reply
#14
Mike...sponsored racer +1
Ponch....??

I'd say vent. It can't hurt...
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#15
dan u will never rip a tire. When you accelerate anything inside the tire is automatically pushed against the rubber itself because of its inertia. with a vented rim and no vented tire it is much easier for more air "to be sucked in" along with any other junk out there. Once the air is in and you spool up the tires where does the air go? it gets trapped inside the tire for that moment.
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#16
Mike that makes sense. Thanks for explaining it.
Reply
#17
Wow..... Cramming these foams in here is round peg square hole al over again.
Reply
#18
what foams
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#19
Stock white ones. Have heard nothing but good things about them. I prepped a tire so I figured why not cram it in there.
Reply
#20
when u get the foam about most of the way, put a thumb ur two of ur fingers on the at the top and bottom of the bead u would glue down and move ur hands in like a rolling motion and the foams will fall right into place then just slide it onto the tire
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#21
Vent the rubber and put a sticker to cover the hole on the rim if there is one already there. Mikey is right on the money. If you get alot of mud on the tire from the track getting muddy in spots like between the tubes, the tires get loaded with mud and you have to clean them off. If you listen to Dimo, i have seen him not vent anything and he was riding on balloon tires.
T-T-T Confusedalute:
Reply
#22
ive seen dimo take an exhaust deflector out of the garbage and put it on his revo too Smile lmao
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#23
Gotcha. I have all of the tires prepped so I will put holes in them.
Reply
#24
wait omg did JT just say I was right???? holy phuck i think hell just froze over hahaha
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#25
I seen ponch take a half eatin riblet sandwich out of the garbage can and eat it too. Wink
T-T-T Confusedalute:
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Proline tires MOAB and MASHER 2000 M3 on which wheels fit ? Antreas 0 2,921 11-29-2010, 05:55 AM
Last Post: Antreas
  Asphault/Sealcoat Tires BJoe 7 3,120 05-15-2008, 05:30 PM
Last Post: chicagokenji
  Indoor Tires. Truggy, Boas And Holeshots? or just Boa J-Dub 9 3,055 01-15-2008, 01:02 PM
Last Post: J-Dub
  Hyper ST wheels? Rob Kass 0 1,485 09-08-2007, 07:32 PM
Last Post: Rob Kass
  Which tires for Truggy outdoor? motoxer4life 23 5,912 08-06-2007, 03:29 PM
Last Post: motoxer4life
  1/10 Tires Ponch 5 2,200 07-22-2007, 11:53 PM
Last Post: Ponch
  panther wheels what do you think cheesecake 6 2,193 06-17-2007, 07:13 PM
Last Post: blktransam
  On Road Tires Revoguy22 15 3,896 04-26-2007, 03:22 PM
Last Post: Ponch
  Imex rc tires-Blew after less then 1 full tank! t to the maxx2 11 3,446 04-04-2007, 10:07 PM
Last Post: rocco79
  Bead Lock Wheels??? Jeep_Guy 3 1,762 02-25-2007, 11:06 PM
Last Post: Casketman

Forum Jump:


Users browsing this thread: 1 Guest(s)