Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pic of some Rossi carnage.
#1
Well, my 528xr finally gave up the ghost last night. How it happened I'm not quite sure. I've been having some brake issues with my single speed conversion on my Hyper One Seven. Sometimes the brakes would just lock up completely. Like someone jammed a steel pipe in the spokes of a bike wheel.

I think at some point during the night when we were racing at the parking lot the clutch nut backed off, and caused the clutch bell to bind onto the crank shaft. Since we never come to a stop, and we really don't slow down all that much I didn't notice.

Well, while the CB was locked up, the brakes did their binding bit, and I think the sudden stop was enough to snap the con-rod. (lets be real, this motor was purchased used, and had a few gallons on it before I put another 9 gallons on it.

So here is the damage. You can see where the crank hit the conrod after it snapped.

http://mywebpages.comcast.net/thirdgen89...si_rip.jpg

It also took a chunk out of the piston skirt too.

The entire engine is a write off, the bearings no longer spin freely, the mounting tabs have had a crack in them for ages now. So the only thing good on the engine is the cooling head. Everything else is a total write off because of the cost of the parts to fix it.

However, this is just the reason I need to convert to a 5s LiPo setup for the Hyper One Seven now. SmileConfusedalute:

Alas poor Rossi, I knew him well.


Attached Files
.jpg   rossi_rip.jpg (Size: 85.29 KB / Downloads: 13)
Reply
#2
Well I'd say you got your use out of it
Kona Kustom Decals
Pro Twister Mods
Reply
#3
Nice, reminds me of the UCA off of Clay's (Naperville HTU) Savage when he hit a lightpole with it..............
[Image: Gotbent.jpg]
Reply
#4
ha ha ha .....
i totally missed this thread and kinda talked about the rossi issue on ur OS 30 sale thread......doh!!

yaeh, no doubt, that motor was in like 4 diff r/c's this year.....loved it when it was in the buggy...sick fast!!


ALL GOOD THINGS COME TO AN END THOUGHConfusedalute:Confusedalute:Confusedalute:Confusedalute:Confusedalute:
LOSI 8IGHT B.....o.s v-spec .21
DM-1....Mario Rossi Tuned .21
ROLLER NEEDED FOR....NovaRossi P5X
Reply
#5
cr4sh_27 Wrote:ha ha ha .....
i totally missed this thread and kinda talked about the rossi issue on ur OS 30 sale thread......doh!!

yaeh, no doubt, that motor was in like 4 diff r/c's this year.....loved it when it was in the buggy...sick fast!!


ALL GOOD THINGS COME TO AN END THOUGHConfusedalute:Confusedalute:Confusedalute:Confusedalute:Confusedalute:

Its true! I had it in a Jammin buggy first, LSP-R second, back into the buggy, then in the Hyper 1/7 in its original incarnation, from there i got dropped into my CRT Pro where it sat for a while. And finally its final resting place was that of the single speed converted Hyper 1/7.

Its been everywhere.
Reply
#6
Thirdgen89GTA Wrote:Its true! I had it in a Jammin buggy first, LSP-R second, back into the buggy, then in the Hyper 1/7 in its original incarnation, from there i got dropped into my CRT Pro where it sat for a while. And finally its final resting place was that of the single speed converted Hyper 1/7.

Its been everywhere.

NOVA HOOCHIE
LOSI 8IGHT B.....o.s v-spec .21
DM-1....Mario Rossi Tuned .21
ROLLER NEEDED FOR....NovaRossi P5X
Reply
#7
reminds me of my 1st 621 P, had a runaway and it blew
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  HotMods Nova Rossi N528XRS NitroLST 22 4,353 02-08-2006, 09:50 PM
Last Post: DAVEC-NITRO-RS4

Forum Jump:


Users browsing this thread: 1 Guest(s)