Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Official RC8 thread
#76
rebuilts are taking over and I hate it...kits FTMFW
Reply
#77
also heard that the ackrman are breaking
Reply
#78
i havent heard of anyone breaking the ackerman, if ur worried about it M2C has an alum one out already. Couple guys broke the top plate, just boil it, they are working on fixing that. And as far as the prebuilt thing goes, i hate it too, but instead of working 10 hours to build the kit now you can go through every piece of the car in a max of 2 hrs and be ready to race. The car has been out less than a week guys there are gonna be a few bugs
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#79
yeah but you always like to slam the 8ight even when it was a new release. and all I have ever broken are maybe a dozen tie rod ends with over 12 gallons on it so far

I was just passing on the info I heard
Reply
#80
i bashed on the 8 because even well after it came out stupid shit was still breaking everyone burning up servos stuff wearing out in 1-2 gallons, and i think its a turd thats just my opinion I dont like the car at all. Atleast give the AE a couple weeks or a month or two before ur start saying its junk everything breaks etc etc. Everyone who posted on the grid about some going wrong also said it was the best handling car they had ever drove turns better and has more acceleration that a losi but is stable like a K car
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#81
dont get me wrong I LOVE my 8ight but I am def. interested in picking up the RC8 in the next couple mths after shit gets worked out...yeah the servo issues on the 8ight were annoying but if you set everything up correctly you wouldnt have issues I burned up a couple servos but after putting a o-ring under the radio tray all has been perfect "knock on wood"...I get what your saying though.
Reply
#82
its just irked me how all the losi guys blamed it on "you dont know how to setup ur EPA's" Alot of guys that have been racing longer than i am had problems, it wasn't a setup thing imo
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#83
i'll take mikes role here, it blows,mugen all the way.lolConfusedalute:
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
#84
lmao ull see al ull see
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#85
i've always loved ae cars and i hope this car will bring more people into our hobby. i already know of two electric guys that have bought the ae car.
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
#86
elec. guys would fall in love with the 8ight
Reply
#87
Maybe Fioroni will make a top plate for the AE. Kind of funny that the new AE buggy is having its pins just fall out because the screw heads aren't large enough to hold them in place. May i suggest an E-clip, after all the MULTI World Champion Kyosho uses this ancient and often ridiculed (by Mikey) type of securing hardware.

What comes around......... Wink
T-T-T Confusedalute:
Reply
#88
Taken from a post on the Grid yesturday;

What I dislike:

The parts you will brake are not available, I broke the steering
ackerman...My buggy has been down for a week and it's looking like it
will be down for another week...The lady I had spoken with at AE was
really rude, when asking her the ETA for the part. You will need to
add diff fluid to the diffs, they are really low in fluid.
T-T-T Confusedalute:
Reply
#89
put a washer on the screw done, or shoe goo done dont need eclips

here taken from the grid:

The RC8 is a very good buggy. Turns like not other buggy I have driven. Very impressed.

I took my RC8 to the track today. It took a bit to get used to. It
is very responsive in the corners. After a few tanks of gas I was
driving it like I owned it. I'm very happy. I trashed the heck out
of the car and didn't break anything.

I dont find the rear end loose at all and I still run the 16 toothe
clutch bell. Even with Bowties that always feel loose for me the car
actually feels hooked up. I dont drive punched.


Joe u forgot the first part of this post:

My Thoughts about the RC8 kit....

What I like:

The buggy has a bunch of small features I think everyone will enjoy.
Car handles like a dream right out the box, however I did experience a
slight on power push. The rear end can also be a little loose when
getting on the gas, because of the insane acceleration the buggy has.
I really like this buggy...

What I dislike:

The parts you will brake are not available, I broke the steering
ackerman...My buggy has been down for a week and it's looking like it
will be down for another week...The lady I had spoken with at AE was
really rude, when asking her the ETA for the part. You will need to
add diff fluid to the diffs, they are really low in fluid.

Finally got some wheel time in my RC8! It turns in like a dream I mean
very very responsive, it just feels light!

JQ,

Not sure on the weight, but it does feel very light in comparison to
other buggy's.

There are too many little "genious" things to list....they are just
mental notes that I took as I was looking at the car for 2
hours...they were things that I was like "man that makes sense"...

check one out and you will see what im talking about

my favorite thing on the entire car is the radio tray...it all goes
together so perfect with no exposed wires...and looks very clean when
all installed...the little rubber insert to keep the wires from
getting mangled is great...



theres the last two pages should i go back farther?
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#90
HAGASAN Wrote:Maybe Fioroni will make a top plate for the AE. Kind of funny that the new AE buggy is having its pins just fall out because the screw heads aren't large enough to hold them in place. May i suggest an E-clip, after all the MULTI World Champion Kyosho uses this ancient and often ridiculed (by Mikey) type of securing hardware.

What comes around......... Wink

id rather have car where the company understands the problem and is going to make strides to fix it, not have their factory drivers tell the public the bladders on our shocks are perfect! you are all just building them wrong we dont need a bigger shock ur crazy and then the next week they are running prototype big bores...
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#91
I was calling you out, you said you didnt read anything about the ackerman, when in fact you did.

Brings back memories of the TTR S3 thread when it first came out. Car was golden, then it quickly faded away.

Here we go.......

Man does it kill you that Kyosho dont want ya!
T-T-T Confusedalute:
Reply
#92
i forgot about the hinge pin prbs...
Reply
#93
it won a nats, wasnt the big bad WC at the nats with his 777 sp2 fioroni edition? didnt have shit for the shitty kitty there
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#94
It just freakin' kills you!!!!!!!!!!!!!!!!!!:bustingup
T-T-T Confusedalute:
Reply
#95
what does?
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#96
car looks cool, we'll see how it looks on the track in the morningSmile
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
#97
Czech-it-Out Graphics Wrote:i The car has been out less than a week guys there are gonna be a few bugs

yeah... But its been delayed for like 10 months! I think that should have cleared that up
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#98
i cant remember ae ever hitting the release date on time,= par for the course
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
#99
I want one Sad
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
no u dont, drive what u have,wait at least till parts r available. the car u have is stronge and easy to drive.
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  The Official Mugen Thread allan42r 436 73,575 05-04-2008, 10:26 PM
Last Post: J-Dub
  Official Kyosho sp2/WC/St-RR thread pwnzor 299 54,321 02-16-2008, 09:38 PM
Last Post: Toughtrax
  Official Mugen MBX5T Thread MX_KEVIN 730 114,341 08-18-2007, 07:12 PM
Last Post: Czech-it-Out Graphics
  Mahomet pic thread slim 21 4,047 06-27-2007, 05:41 PM
Last Post: blktransam
  official mugen mbx5R thread chickenfarmer3 30 6,735 03-15-2007, 10:31 AM
Last Post: FreeRideFrosty
  tire thread.... AddictedtoNITRO 21 5,424 02-19-2007, 03:43 PM
Last Post: AddictedtoNITRO
  Official Thunder Tiger ST-1 Thread DAVEC-NITRO-RS4 485 68,442 01-09-2007, 09:03 PM
Last Post: Czech-it-Out Graphics
  ponch's Kanai II Buggy thread Ponch 123 18,528 11-27-2006, 10:56 PM
Last Post: Thirdgen89GTA
  1/10th scale thread cemeb4dk 69 12,750 11-27-2006, 08:02 PM
Last Post: rocco79
  The Ofna Jammin CRT Thread. Younger kids beware. Michowski 362 55,966 11-20-2006, 12:10 AM
Last Post: RobH

Forum Jump:


Users browsing this thread: 6 Guest(s)