Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
The Official Mugen Thread
the new car is due out next summer with big bore shocks. dont know if they will have the shocks early to throw on the 5's. lots of brake disks to choose from mike, i like using the disk guides,no glue on pads,and those ttr ones look very thick. i want to slow the car down not do nose wheelies.lol
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
the disk guides just create drag imo; if u dont wanna do endo's set them up right Smile
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
they dont seem to drag too much when i pass you. and that was a jab at the fact that the disks are so thick. im pretty happy with my brakes even on the truggy. avid disks= $13.00 not running ttr junk = priceless .lol
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
that must be why scott hughes runs them...
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
saw he was running them, thought they would be good enough for me.Smile
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
I use TTR brakes on my Mugen and they stop it on a dime but I had to dial a lot of it out I don't need to go to a complete stop every time I touch the brakes. Plus they don't work if you spill fuel on them. I'd run Avid's if I had the money.
Kona Kustom Decals
Pro Twister Mods
Reply
okay u can afford a nice vehicle but cant spend 15.00 on nice brakes.....
Reply
dialing brake out is a good thing, less stress on ur servos for one thing. No brakes will work when you soak them with fuel, but ive never noticed them fade or go away after a pit, neither has chad
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Well I see no immediate need to replace them right now and I like to slide a little around corners not hitting my brakes and coming to a complete stop. I just spent my money on a new charger and a new rear bulk, plus I just spent $125 replacing the entire center and most of my front diff. And maybe it's just me but I've got an issue with overfilling a little when pitting because I'm trying to get them out there as fast as possible. Also I never knew all brakes didn't work when you get fuel on them. I guess I should have assumed but I always heard the big argument against TTR brakes being they won't work with fuel on them. And your right they last forever and I've never noticed fade as mentioned. I'd notice it too because my brakes are so dialed out right now if they faded any I'd have problems(should probably work on thatConfusedmashSmile
Kona Kustom Decals
Pro Twister Mods
Reply
dial out front brake, i put those discs in there they are brand new, id never run any other brake disc
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Thanks Mike I'll give it a try this weekend
Kona Kustom Decals
Pro Twister Mods
Reply
i want to try kyosho brake pads on my mugen with the stock steel rotors
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
i dont think they will fit, i ran johnny's sp2 when he had them on and for 60$ they arent worth it imo
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
but u have to have them and they are the best becuase porsche or some other company uses that material lmao
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
lol
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
i love the ttr pads, even if you get fuel on them they are still good. Too mych front brake is bad.

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
just a fyi scott hughes does not run avid brakes anymore he has not use them for a while.....
Reply
w
Reply
he runs TTR brakes
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
no craduckc (spelling is wrong) the anti lock ones
Reply
craddock^^
Reply
your right ken, at the time he was thats why i tried them.the ones you had looked pretty cool but i didnt know who had them. i tried the avids with 8mm of fuel tubing and im very happy with the progressive feel im getting on the car and truggy. i havent noticed any loss of brakes due to heat,or fuel. joe s. has pitted for me the last couple of pro series races and i dont think anyone is faster or goes thru more fuel.lol i looked at my car after st. louis and noticed fuel drops on the back of the rear diff case and toe block. during the main some of the pit stops were being timed so the pit men had their own race going on. joe was the fastest, by himself, and using a MUGEN fuel bottle. so anyway im pretty sure fuel found its way to my brakes and they worked just as well at the end as they did at the begining.
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
im defiitely thinking about the ttr brakes because mine started to slow a little at that bernies bash. So the ttr are the good ones right or are the advantage better?
Reply
i havent tried the ttr brake disks but chad was running them on his mugen and he satd he liked them. dont know how much they are but lh did have them in stock. i run the avid's and i use their bearings for the clutch. very happy
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply
heads up mike should come running waving that ttr flagConfusedalute:
MUGEN SEIKI
GRAVEY GRAFFIX
LEISURE HOURS
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Official Kyosho sp2/WC/St-RR thread pwnzor 299 54,034 02-16-2008, 09:38 PM
Last Post: Toughtrax
  New buggy, losi 8ight T or mugen mbx5T snoracer 10 3,834 01-15-2008, 08:50 PM
Last Post: motoxer4life
  Mugen Mbx4 Xr Works PMHOURS 9 3,358 01-11-2008, 04:20 AM
Last Post: PMHOURS
  Mugen Screws slaytanic 13 3,331 12-05-2007, 11:02 PM
Last Post: slaytanic
  Need some help Mugen Guys!! Prospec? slaytanic 8 2,603 11-27-2007, 05:40 PM
Last Post: slaytanic
  Official RC8 thread motoxer4life 158 28,435 10-16-2007, 12:01 PM
Last Post: allan42r
  MUGEN help and set up. allan42r 41 7,868 08-20-2007, 07:32 AM
Last Post: chickenfarmer3
  Official Mugen MBX5T Thread MX_KEVIN 730 110,815 08-18-2007, 07:12 PM
Last Post: Czech-it-Out Graphics
  Mugen Linkage???????? BAMF90 27 5,659 08-15-2007, 03:47 PM
Last Post: chickenfarmer3
  Mugen problem motoxer4life 19 3,730 07-30-2007, 09:37 AM
Last Post: motoxer4life

Forum Jump:


Users browsing this thread: 4 Guest(s)