scrc indoor Comp #3 rc Hobbies Naperville

[Jetboat]

couple miles... From Joliet prolly faster to take I355 to I88 get off @ 59, only a couple blocks south of I88 on 59

[Ponch]

Ok....

So I googled the address from RC Hobbies site. It says that it is a little south of ogden ave, and a couple blocks south of the naperville HT.

Correct? I thought it was north of there.

[Jeep_Guy]

Matt,
Just take RT 59 NORTH from the Naperville Hobbytown.....then look for WENDY's on your RIGHT about 2 miles down. Turn into the Wendy's and it is behind it.

[Jetboat]

yeah, google getting you lost!!!! It NORTH of HT. From my house, if I take 355-88-59 its about 30-35 mins...via 59 its closer to an hr because of the mall...just fyi.

[AddictedtoNITRO]

Me, Bubba, And Stratcat will be there!

[Ponch]

Dude tomorrow's going to freakin rock.

Josh, thanks for the tip about the Wendy's. That will be my landmark, so it better be there :p:

[BJoe]

Few miles, just look for the Wendy's.

[Jeep_Guy]

Dude tomorrow's going to freakin rock.

Josh, thanks for the tip about the Wendy's. That will be my landmark, so it better be there :p:

Oh the WENDY'S is there......will be hitting it for lunch after TECH. Should be there by NOON.

[Mnster]

My brother and I both wish we could make it. But, we both have to work so take good pictures.

[Jeep_Guy]

Should be a GREAT day.....good comp location....hopefully no broken trucks......Wendy's Spicy BACONATTOR to start the afternoon. ROCK ON!!!

Matt, I should be there by Noon (leaving the house at 11:15).....that should be enough time to get that radio set up before everything starts.

[AddictedtoNITRO]

man, I was working on this thing till 2:45am this morning. Everything "should" be good to go. I'm a little worried about my battery pack. Anyone ever tried soldering a pack together with a 60watt iron lol. It dosen't work too well. I ended up heating the tip with a propane torch and trying to work very quickly lol. What a mess. 4 hours to assemble a pack geesh. Time to call cheapbatterypacks.com. Hopefully I didn't destroy a 55.00 pack lol I charged it up and it said it had 9.880 volts so I'm guess ing I didn't destroy any batteries lol
I'm gonna be pissed if this thing breaks on the first rock lol

[Jetboat]

1 1 Javier Guevara

2 11 Brian Smelik

3 13 Kevin K

4 19 Jay Baneventi

5 20 Matt Grutzius

6 32 Bob Peterson

7 33 Cedric Vann

8 35 Doug McCoy

9 40 Jason Edmonds

10 49 Josh Raben

11 52 Ryan Atkins

12 52 Matt Prodehl

13 62 Jeff Key

14 66 Eric Murdock

15 80 Jeff Shirley



16-18 80 points from DNF's

Matt Randall

Joe Handley

Nolan Murdock

Ill get the series points updated Monday (I forgot to email myself the excel doc)

[AddictedtoNITRO]

woohoo. Thanks for a great time guys. (even though I broke) Hopefully I can do this again soon. Now I know all my weak points lol

First let me say that I completely forgot that I brought my camera until it was too late. Then I broke so my share of pics is minimal but here they are. Hopefully next time I can get some more of everybody. Sorry guys.








Mx kevin actually pulled outta this twist up lol

[bubbaracing]

Today was a good time, just wish i'd done better, bad choice on the tires, I said I was gonna make those Rock Crushers work! I made them better but not good enough, and my dig wouldn't unlock the rear axle and that was givin me fit's! mash:mash: I like the course being all rocks, but I need to make my tires work better and redo my dig also! Congrat's to Javier,Brian,and the NOOB MX Kevin on makin the top 3 in his first comp! Good job Kev!! :joy: Oh and thanks Jeff for the good shot's of my truck, next time your truck should hold up, this was the trial and error for ya! lol j/k

[Ponch]

Jeff...Sorry for not recognizing you bud! For some reason, I put hoobajoob's face and your name together in my mind. Now I got it lol.

Fun azz day. Alot better than I expected it to be from hype. I will definately go back there for some practices in the future.

Jeff (jetboat) sorry about ragging on your rig all day lol... At least you finished!!!

Kevin...good job dude.

brian...all I can say is WTF lmao dude I don't know how you pull this shit off time after time with that stock azz truck lol

Javier... Nice job bud. Glad to see that jeep working well for you. What broke on the rear axle after the comp?

Awesome day.

Horrible quote from today, way overused lol

"that's what she said"




And Uhh.... I'm not sure of your name but you work at the orland hobby town, have a blacked out ax10 with a bug body and HR rims... You were interested in my Lizard Claw tires (the hybrid ones) if you're on here, drop me a pm and we'll work something out for ya.

[bubbaracing]

We need to rock race some more there Ponch! That was the funnest part of the day!!! Can't wait for the pics of that and the video's!! :joy::joy::joy::joy:

[Ponch]

I want the video of my first run and the curtain incident....lmao that was great. I'm just happy the crawler let go when I threw it into reverse.

Good thing I practiced that move at home with blankets! ha

[bubbaracing]

I want the video of my first run and the curtain incident....lmao that was great. I'm just happy the crawler let go when I threw it into reverse.

Good thing I practiced that move at home with blankets! ha

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Yeah right! LMFAO :bustingup:bustingup:bustingup:bustingup

[Jetboat]

Ponch, Just wait until Naper HT, Ill be all dialed in... I have a test and tune sched for next weekend down at my outdoor course and then a second at HT on the 25th....

Edit: Dang it Ponch!!!! You jinxed me again, I was changing tires and snapped an axle shaft....hopefully the MIP CVD's I just ordered will make it in time for this weekends practice.

[Ponch]

wtf? you using an impact gun to get them wheels off!? jeeebus.

[Jetboat]

nope, just by hand, I think I used to much locktight when I put them on but, I was tired of the hex spinning.

I did manage to get the wifes Talon done, kept it pretty basic no dig or anything fancy....Now just have to get her to compete.

[thenewguy821]

brian...all I can say is WTF lmao dude I don't know how you pull this shit off time after time with that stock azz truck lol.

Keep in mind, some people upgrade too much, causing more problems in unexpected areas...

[Rob Kass]

MX Kevin is the man. 3rd in his 1st comp. Nice.
Now get back to LH so them Mooooogens can do what they do best!

[MX_KEVIN]

Thanks everyone. And Soon Rob, SOOOON!

[MX_KEVIN]

Hey , I just wanted to say that those guys running RC Hobbies are great guys. To take the space and time in their store shows their devotion to the hobby and their customers. My little one wanted one of those helicopters on a stick things that was $2 and he was going to give it to her, very nice but im trying to teach her things cost money. They made us feel very welcome. Allison had no problem driving the crawler through the store and possibly drove the owner nuts. We had a great time! Thanks.