Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
October Berwyn Bash!
when I get tires that grip better on my truggy I want a rematch against the greevo! That greevo is quick and setup nice.
-- John --
1:1.. 01 Z28 Camaro A4 Sure.. its stock.
1:8's.. K3, Inferno GT, and a straight line beater car
1:18.. RC18t Mamba and 3s lipo
Reply
you want a rematch? I dont think so. I won fair and square so i have nothing else to prove. Im done.
Reply
well if you really want to sure
Reply
Lots of fun guys and nice to meet you all. Alot of cool RCs out there. I felt fortunate that my tape and bubble gum operation made it through most of the afternoon. I think I could have gotten pretty far in the grass drags had it not been for my throttle linkage popping out. Whoever that first guy was I dragged I had him. Oh well live and learn, next time I'll be ready! I got some pics too I'll post tomorrow. I gotta make a repair list: One lost dogbone, one burned thrust bolt, one broken body mount post, somehow I tore open the side of the left rear tire on the inside edge, and a broken or loose motor mount. Not too bad really.
Reply
Michowski Wrote:you want a rematch? I dont think so. I won fair and square so i have nothing else to prove. Im done.

:bustingup :bustingup :bustingup
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
that was a great time, only got about 3 tanks through the 9.5 but those were some fun 3 tanks! i wish i would have hit the ramp a little bit more but oh well! still haven't even looked at the buggy since i left so i don't know whats broken/not! btw thanks for the servo arm tex thanks for the info about e.p.a. and for organizing this whole thing! also anyone get a pic of me getting worked over by the truck? my ribs still hurt!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
It was a good time. And they were right... I would hit the big ramp. I managed to snap the screws that hold the wing upon landing and somehow moved the motor. It is really tight though and I stripped out one of the screws trying to loosen it. Time for a new wing mound and some new screws.

The grass drags were a blast. I came about as close as I could have to michowski. We were right next to each other and in the end I think I ended up driving under him. Pretty crazy. Not to bad for having 0 time to tune my motor. I showed up and ran. Twas a blast.
Reply
Lots of fun today even though I broke kinda early. Huge turnout! I was pleasently suprised to say the least.

Thank you all for such a great bbq and bash today!
Reply
ok started tearing down my buggy, first thing i noticed and put on the list all new bearings(what and where should i get these) second new diff fluid(what weight should i use f/c/r) also what are the pros/cons of using torsion diff i might decide to get them if their worth it! new shock fluid(also what weights should i use), thats it for now!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
bearings are relativly cheap for buggies.. they are all the same 8x16mm and there are 18 of them total. Some people like to run the most expensive ceramic bearings they can find. I just buy cheaper bearings and replace them often. hell I use bearings taken from kits that people part out on ebay. diff fluid try some 5/7/1K or 3/5/1K. torsens are big $$$ and can cause twitchy handling plus there is more maintence involved because the oil needs to be changed.
-- John --
1:1.. 01 Z28 Camaro A4 Sure.. its stock.
1:8's.. K3, Inferno GT, and a straight line beater car
1:18.. RC18t Mamba and 3s lipo
Reply
I had a blast! I experienced quite a few motor gremlins though. First my clutch bell screw backed out, then my midrange needle screwed itself IN! This made tuning difficult until I found it. Then It was running great, but refused to shift gears. It worked fine last week. That Berwyn is like the Bermuda Triangle!

Well I finally got it to go fast enough to jump the big ramps and somehow manage to loose a dogbone. Why do people say the Savage is so tough? ANybody want to trade for a Revo?

At least my Herbie the brushless buggy performed well! Actually kept up with the nitros for a little while. Great times guys!

When is the Winter Berwyn bash?
You're never to old to be immature
Reply
mikeh Wrote:I had a blast! I experienced quite a few motor gremlins though. First my clutch bell screw backed out, then my midrange needle screwed itself IN! This made tuning difficult until I found it. Then It was running great, but refused to shift gears. It worked fine last week. That Berwyn is like the Bermuda Triangle!

Well I finally got it to go fast enough to jump the big ramps and somehow manage to loose a dogbone. Why do people say the Savage is so tough? ANybody want to trade for a Revo?

At least my Herbie the brushless buggy performed well! Actually kept up with the nitros for a little while. Great times guys!

When is the Winter Berwyn bash?

It probaly sheared the dog bone... I went through like 9 this season! :eek: The racers edge bones stop that problem
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
Hey all. Yesterday was a fun time. I didn't really get to mix and mingle since the wife had me running errands all day and I showed up toward the end, but I definitely want to come out for the next one and compete. Only problem is all I saw was people running nitro and all I got is electric, so guess whats on my wish list for christmas?!

I'll have to get to know everyone on the boards and then I'll see you guys agaiun in the spring (unless a Winter Bash is possible!)

PS Who was driving the Love Bug? I was just curious what you have under the shell? Was that a MiniT with a gas engine?
Reply
Yeah... good times... just need to fix the buggy now. I think it will be relatively cheap. Just the screws for the motor mount and a new wing mount because it has 2 screws snapped off in it. Hehe... Buggy fly high.
Reply
hmm.. the only Bug body car that was there was Mikeh's HPI Electric MT. 1/10 scale 4wd.
-- John --
1:1.. 01 Z28 Camaro A4 Sure.. its stock.
1:8's.. K3, Inferno GT, and a straight line beater car
1:18.. RC18t Mamba and 3s lipo
Reply
space_doc Wrote:Hey all. Yesterday was a fun time. I didn't really get to mix and mingle since the wife had me running errands all day and I showed up toward the end, but I definitely want to come out for the next one and compete. Only problem is all I saw was people running nitro and all I got is electric, so guess whats on my wish list for christmas?!

I'll have to get to know everyone on the boards and then I'll see you guys agaiun in the spring (unless a Winter Bash is possible!)

PS Who was driving the Love Bug? I was just curious what you have under the shell? Was that a MiniT with a gas engine?

I didn't sign you up did I? Which person were you?

SixVi6-Camaro Wrote:hmm.. the only Bug body car that was there was Mikeh's HPI Electric MT. 1/10 scale 4wd.

with a Novak SS in there....Herbie! lol

Battery powered cars are welcome Cool
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
Oh, I was the guy in a black fleece vest with a maroon shirt, goatee and stach. I came right when the drags started and stood off to the side about halfway down the stretch. I was only there maybe half hour. Like I said, I was running errands and sneaked by to watch. Came home late with the groceries cuz of it. Tongue
Reply
oh, ok... cool....
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
well first off a big thanks to tex. it was the best bash ive been to in a while. it was awesome! it was also nice meeting people. its getting to late in the year to have another one this year but i highly suggest we have another on next year. two thumbs up guys :headbang:

AND the drags were freakin crazy too i wish i had a better truck. i have a dream that one day i will have a revo as good or better than mich's :bustingup props to mich you got a realli nice truck man :headbang:
Reply
thanks a lot. And I dont have a revo i have a greevo.
Reply
Hey guys, had a great time as always!

Great job keeping the thing organized Tex!

Always fun meeting new people, and seeing all the 'usual suspects'. :p:

I posted a bunch of pictures over at
http://www.bigsquidrc.com/

Hopefully wont take forver for a new video! =)

Brian
http://www.BigSquidRC.com
For Bashers, By Bashers!
Reply
awesome pictures brian, cant wait to see some video's.
[Image: mich1iy1.jpg]
Reply
Michowski Wrote:cant wait to see some video's.

+1 on the videos
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
Brian_BigSquidRC Wrote:Hey guys, had a great time as always!

Great job keeping the thing organized Tex!

Always fun meeting new people, and seeing all the 'usual suspects'. :p:

I posted a bunch of pictures over at
http://www.bigsquidrc.com/

Hopefully wont take forver for a new video! =)

Brian

Hey, when did you left?
Reply
MyJeep Wrote:Hey, when did you left?

he left pretty earlier if I remember correctly, well before the grass drags.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Big Squid RC - Summer Kick Off Bash June 9th! Brian_BigSquidRC 0 20,348 06-05-2012, 11:43 PM
Last Post: Brian_BigSquidRC
  Bash Event at the Berywn Jumps Brian_BigSquidRC 1 16,830 06-15-2011, 12:36 PM
Last Post: Mr. Tune
  Fun with iMovie. Old school footage! Berwyn RC Bash Mr. Tune 7 7,286 02-28-2009, 02:05 PM
Last Post: rocco79
  Berwyn Bash September 13th Michowski 91 45,216 09-22-2008, 04:30 PM
Last Post: firesprink281
  Bash Event Mr. Tune 0 4,821 05-02-2008, 12:31 PM
Last Post: Mr. Tune
  End of summer bash/bbq! Saturday 9-30-06. Berwyn, IL firesprink281 190 39,207 10-02-2006, 04:31 PM
Last Post: FreeRideFrosty
  Berwyn BBQ Bash Sunday June 4th 2006!!!!!!!!! mikeh 287 57,550 06-08-2006, 11:48 PM
Last Post: BottledBeast
  Snow Bash Saturday January 28th! FreeRideFrosty 624 103,981 01-29-2006, 12:10 PM
Last Post: FreeRideFrosty
  Video Shoot in Berwyn, Sept. 25! Mr. Tune 19 8,180 09-24-2004, 08:34 PM
Last Post: firesprink281
  Aug. 21 BBQ and Bash Info. Mr. Tune 0 3,325 08-17-2004, 11:48 AM
Last Post: Mr. Tune

Forum Jump:


Users browsing this thread: 9 Guest(s)