Official yack away thread

[t to the maxx2]

Yeah finals suck, all they can do is lower your grade
For example, in math I had a 82.5
82.5 x .8= 66
then the final is worth 20%. So if I got say, a 100, my grade will only become a 86.
I found out that unless I get a 70 or lower, my grade(on the transcript) will be the same

[FreeRideFrosty]

I think Dave will be going to jail after he kills tommy... LoL

And dave can you post a pic of the hex drivers?? I need to get a nice set and am still undecided.

And Tommy... My Revo will be the best. Hahaha! I think you are jealous that you don't have one. We should race. LoL I wonder how I could hold up against a bad buggy driver?? Oh... wait... it doesn't run. I'm J/K man...

[rocco79]

I get stuff from cali in 2 days. No excuse for 25 days unless it came by a big wheel!!!!!!!

[snakebite46]

from cali in 2 days? Your either paying next day or in good with Kendall and Kelly. =P

[Michowski]

same for me rich, all my a-main stuff is 2 days max.

[DAVEC-NITRO-RS4]

If your in the picture it would be A: child pornography B: I could put it up on my wall in a corner and you would never notice it!



How do you know my secret?



Here you go!

DAVEC-NITRO-RS4 is a old fart who like to play with little boys, he cannot drive an r/c mt around the track! He, for some reason, has a facination with squirrels? He's balding, and did i mention likes to play with little boys?

J/K Dave I know you can drive a MT around the track!

Move to your left...that guy next to you is blocking me getting a clear headshot.

[DAVEC-NITRO-RS4]

They are like these sort of. The handles look more like the one in Mr Tunes avatar.

I'll get a pic posted later from home.

[kevinF]

kool tools

[DAVEC-NITRO-RS4]

Set of 7,

.7
.89
1.3
1.5
2.0
2.5
3.0mm

$23 at Grainger. But they only sell to business. No retail walkup sales.


http://www.wihatools.com/263sermm.htm halfway down the page.

[FreeRideFrosty]

Hmmm... I looked on Grainger and could only find one or two sets of drivers. However they were standard and not metric ones...

[FreeRideFrosty]

Oh... that makes sense then. So if I like them you are going to order a set for me right?? Huh? Huh??

[DAVEC-NITRO-RS4]

Graingers website didn't have them. I found them in their catalog. Go back up one or two posts and you can find them online.

[DAVEC-NITRO-RS4]

Oh... that makes sense then. So if I like them you are going to order a set for me right?? Huh? Huh??

Just bring cash......

[squirrel]

Rob yours was true! sorry

I think Dave will be going to jail after he kills tommy... LoL

LMAO

And Tommy... My Revo will be the best. Hahaha! I think you are jealous that you don't have one. We should race. LoL I wonder how I could hold up against a bad buggy driver?? Oh... wait... it doesn't run. I'm J/K man...

Oh your askin for it now!! When my buggy was running I got second place against some very good drivers! We will def race when i get a new motor or a REVO!

Move to your left...that guy next to you is blocking me getting a clear headshot.

Is that better?

[FreeRideFrosty]

LoL... Yeah... I will check them out some time and get you some money if I like them. I think I only need 1.5, 2, 2.5, 3, and 4. Something like that. (I'm sure someone will tell me what I need for the Revo. And what size a set screw is. LoL) Is it cheaper to buy them seperately??

[RobH]

LoL... Yeah... I will check them out some time and get you some money if I like them. I think I only need 1.5, 2, 2.5, 3, and 4. Something like that. (I'm sure someone will tell me what I need for the Revo. And what size a set screw is. LoL) Is it cheaper to buy them seperately??

The RD Logic took kit is what I have and its great. It has 1.5, 2, 2.5, and 3mm. Havn't found a screw on my truck yet and not had the right tool for it.

A set screw is a small screw used to hold something in place, such as a hingepin. I'll get you a picture.

[FreeRideFrosty]

LoL... I know WHAT a set screw is I just couldn't remember what size it was. As in what hex size... I like your hex set though. (It is the one from hobby town right??) If I don't get the ones from grainger I would probably get those...

[RobH]

LoL... I know WHAT a set screw is I just couldn't remember what size it was. As in what hex size... I like your hex set though. (It is the one from hobby town right??) If I don't get the ones from grainger I would probably get those...

oh whoops, just skimmed through your post. I use the 1.5mm driver for set screws.

Yes, its the set I got at hobby town.

[destroy_my_revo_15]

ya i had no school today cause we finished finals yesterday. and it doesnt matter if finals are before or after winter break. you dont have to study if u know it u know it if u dont u dont. and it only raises are grades 3 percent up or down so if ur on the borderline it doesnt matter. winnetka>then all lol

three percent????? ours are 20% of our semester grade YAY for Joliet Central.....

[FreeRideFrosty]

Ours are 20% too... I always end up having to Ace it to bump up a grade but can generally fail and keep my same grade...

[squirrel]

Yeah finals suck, all they can do is lower your grade
For example, in math I had a 82.5
82.5 x .8= 66
then the final is worth 20%. So if I got say, a 100, my grade will only become a 86.
I found out that unless I get a 70 or lower, my grade(on the transcript) will be the same

Hehe I slept all year, aced my finals and passed with A's!

[DAVEC-NITRO-RS4]

The RD tools are nicer but cost twice as much per driver. I figure if I keep them in good shape the Wiha's will be fine. If I do wear one out or break it, you can buy them individually. I might get a HD t-handle hex wrench for the biggest hex, like shock screws.

[Ponch]

I like my Trinity Hex drivers...I have 2 now...Dan you used them at the track...About $8-$9 each, but I think it's worth it since I only have 2 kinds of screws lol...This is them;

http://www2.towerhobbies.com/cgi-bin/wti...LXWS41&P=7

http://www2.towerhobbies.com/cgi-bin/wti...LXWS43&P=7

And here's the rest.

http://www2.towerhobbies.com/cgi-bin/WTI...EX&S3=&S4=

BTW...You can get these at leisure...lol

[FreeRideFrosty]

Yeah they have those at Al's too. I think they are a bit pricy and have been known to strip out the set screw that holds the actual shaft in place... When they are new/like new they are great though...

[BottledBeast]

my mom works for grainger :joy: