Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Truggies
#1
First off let me say that I think the concept of the Truggy is a great one and am considering buying one. However, since Truggies have far more in common with buggies and are turning times as good or better than buggies they need to run with the buggies when there is not enough of them for their own race.

They should not be lumped in with the Standard MT's who don't stand a chance. It's the equivilent of Pro Strockers vs. Funny Cars. They look a lot alike but we all know who has the decided advantage. It kills the fun going into a race knowing I don't stand a chance against an experienced buggy racer racing a Truggy.

Some might say, "well, these are just club races and are for fun". Well, guess what? Most of us only race in club races so these need to be the training ground for the big ROAR races. That's why I travel 2.5-3 hours every weekend to race. Please try to remember that a democracy protects the rights of the minority as well as the majority. I'm very competitive and have a HUGE amount of money invested in my Revo. Even the best PRO Revo drivers are only turning in times that would put them in the middle of the pack at the Pro Series races inthe Unlimited MT class. If they can't win what hopes do I have?!!!!

I don't want to penalize the Truggy guys, I just want a fair playing field and the hope of winning with the only reason for my losing being my driving ability.
Reply
#2
They are a seperate class at dirtdawg events
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#3
If there were more of each class they would run them seperate...just subtract the truggy and thats your position. They could run the trucks togeather and then give seperate scoring sheets...might be good way to handle it.
Reply
#4
ATA, Thanks for helping to make my point! We all realize that if there were more Truggies they would be in their own class, My point is, why should us MT racers be penalized?

Let them race with the buggy guys since they have far more in common with you guys? Actually, I think, in time, they'll beat you buggy guys. They have the same suspension, a wider stance, more HP, bigger tires=more traction, and a center diff. What are you guys afraid of?
Reply
#5
I see your Truggy/MT issue.

But if there is not enough, they have to go with MT's justbecause of the size issue. Just like you wouldnt want to combine stadium and Mt's. The truggies are fast and nimble, but some of the Revos are just as fast (or can be depending on the driver, Ryan and Rich can run their revos with trugs all day)

The thing to remember is this is suppose to be fun for all, and no one should be punished or not allowed to race if there isnt enough to fill a class. SO you must combine, I run races all the time at our club events it just has to be that way.

Your same arguement can me made by Savage owners that they dont want to race Revos, they have no chance against them. (in most cases Rocco)

Due to tire and wheel size the only solution is to run mt's together. ALso buggies are limited to .21 engines where MT's can run any size up to .28
A friend will help you move, but a REAL friend will help you move a body.
Reply
#6
I agree on the savage racing against revo's issue. The savage simply wasn't made with racing in mind. High center of gravity, crappy steering, high weight, and the list goes on and on. I spent a ton of cash trying to get a good setup, and my new revo in stock trim will easily outrun my old savage.
Reply
#7
Quote:ATA, Thanks for helping to make my point!
Smile Seperate time sheets was a good idea no? Actually I see your point, and I my self have complained about it too since ive raced my revo more than any other class and usually with truggies. There have been a couple times when i got second in the a main with a truggy in first. :mad: However when things got slow at leisure though i was happy to see them just so we could run a MT class period.
Reply
#8
quit whining :p

I race a truggy and you slosh me in races satach. It's all about the driver (90% anyway)

A nicely setup revo with the right driver will get major respect out there. No matter what you put against it.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#9
I agree with Tex....its mostly the driver Big Grin
When it comes to Revo's racing against truggies, each one has their week points as well as their strong points.
I know for a fact that Ryan's Revo is just as fast, if not faster then my LSP on the straight. He can also hold much better lines when going around turns.
Most Revo's Ive seen, go where your want them too and actually hold the turns much better, at least much better then my understeering LSP, I have to use the rear brakes to get the rear to come around most of the time, just so I can turn tighter.

I raced out at AJ's yesterday, and Kevin's LST was only 10 sec behind my TQ spot. That track was sooo slippery loose dirt/sand mix and wide open throttle running with only 4 small jumps on the whole track....it was like running on a baseball diamond with speed bumps for jumps.....Truggies had no advantage their but yet I still heard people complain.

Anyway.....Ive heard these kind of complaints alot lately from non truggie owners when they loose, but I still think its mostly the driver Big Grin

Give me 15min with a powerfull, hooked up Revo... and I bet I could have still won the races Ive wonBig Grin
Kyosho ST-R
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos

Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos

Kyosho Inferno GT
SH .28
Reply
#10
Eracer76 Wrote:Give me 15min with a powerfull, hooked up Revo... and I bet I could have still won the races Ive wonBig Grin


+1
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#11
dude theres no way im as fast as you. Down the straight away we got the same speed but otherwise you would just blow me away.
Reply
#12
I'm in total agreeance with Michski
Reply
#13
Me too!.......Mich is GOOD..... Eric is EXCELLENT. (don't let it get to your head though eric) lol
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#14
Mich, the only reason I blow you away is because you crashed or got caught up in traffic more times then I did......
So.....I'll say it again, its mostly the driver Big Grin

If my truck wasnt so damn hard to get parts for.....I'd swap trucks with you guys for a race, so we could see who wins then Big Grin

Gabe,
I'd like to think Im pretty good, but by no means do I think Im excellent Smile
Reply
#15
You beat scott from maxspeed designs and he slaughtered everyone at the Pro Series A-main.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#16
Tex Wrote:You beat scott from maxspeed designs and he slaughtered everyone at the Pro Series A-main.

When did I do this, before the Pro Series?
Maybe he was having a bad day when I raced him Smile

I have bad days too, like the last time I raced Mich, I broke when I hit him at the end of the straight and he won!
Reply
#17
I think Gabe is talking about the DD race.
Reply
#18
Scott wasn't at teh LH DD race. Joe Torres was..
A friend will help you move, but a REAL friend will help you move a body.
Reply
#19
Hrmmmmm. I know it was some race at Leisure. I remember Scott was having trouble with axles on his MGT.
Reply
#20
No I'm talking about the a-main at the Pile 2 Sundays ago. Scott bumped from the B's to the A's, I'm not sure if he was having probs or not.

All I know is he killed everyone at Hardesty's
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#21
I think Scott was there the week before our last race. but I could be wrong
A friend will help you move, but a REAL friend will help you move a body.
Reply
#22
anyways back on the thread topic

TRUGGIES RULE!!!!!!!!!!
Keep your MT's at the bash pit!, where they belong!!!


Just playing thought I would spice up the thread. Big Grin
A friend will help you move, but a REAL friend will help you move a body.
Reply
#23
george i could beat your truggy anyday of the week Wink lol. We gotta have a free for all race one day.
Reply
#24
Scott didnt run M/T at Rockpile when we were there. He only ran 1/8th scale. Said he needed a motor for his MGT.

LOL George....
Reply
#25
Any questions????


[Image: lg-15455.jpg]


I didn't think so.............
A friend will help you move, but a REAL friend will help you move a body.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Truggies FreeRideFrosty 1 2,479 07-22-2009, 05:39 PM
Last Post: J-Dub
  do you race 1/8 nitro truggies indoors in the winter karlracing 8 3,192 12-05-2007, 11:00 PM
Last Post: Eddie F
  I need some advice on Truggies PoPRC 26 5,088 02-17-2007, 12:58 AM
Last Post: Czech-it-Out Graphics
  RPM parts for truggies Biodragen 3 1,746 12-11-2005, 12:35 PM
Last Post: Tex

Forum Jump:


Users browsing this thread: 1 Guest(s)