Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Useless Power?
#1
I am thinking about putting a Picco .27 that I have laying around into my Revo. Now would this engine have useless power for racing? and it will prolly definately be good for bashing right? Also, since this is a BB, what BB engine mount do you guys suggest I get?

Let me know,
Joe
Reply
#2
useless power. all ur gonna do is beat up ur gears with that
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#3
What engine you think would be good for LHR?
Reply
#4
well I think any good 21 will work. for leisure something with good top end is to ur advantage. I would recommend a RB WS7II or 3. Even the 3.3 motor would prolly be good enough
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#5
Yeah.... I was thinking the 3.3. I will prolly just stick with the 3.3 so I dont have to get a BB conversion mount ect.

Does the extended chassis help alot while racing?
Reply
#6
Yeah, it will help alot with racing, because you are going to be wheelieing, setbacks and the center diff will help it.
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#7
Czech-it-Out Graphics Wrote:well I think any good 21 will work. for leisure something with good top end is to ur advantage. I would recommend a RB WS7II or 3. Even the 3.3 motor would prolly be good enough


You're nuts. No BB is needed in a revo for racing. The 3.3 is more than enough power. Anything more is uncontrolable.... I had a BB in mine. Stupid fast.... but not for racing.
Reply
#8
Dont tell Tex hes nuts. He does very well with a P5 And dont forget hoe big that ooutdoor track is.
Yes, for most a slower/less power motor will get us around a track quicker. but pulling wheelies down the straights sure is funBig Grin

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
#9
Dan an RB wouldnt be nuts, thats why i run one in my buggy. It doesnt have as much high rev low end like all the motors u guys love. He asked for something for LH and with all of the huge straights i think a motor like that would work well
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#10
MX_KEVIN Wrote:Dont tell Tex hes nuts. He does very well with a P5 And dont forget hoe big that ooutdoor track is.
Yes, for most a slower/less power motor will get us around a track quicker. but pulling wheelies down the straights sure is funBig Grin


And what motor did Tex switch to for more reliable, controlable power?? He drove the P5 well.... yes, but there are better choices. I would fear him more on the track now than before.
Reply
#11
Czech-it-Out Graphics Wrote:Dan an RB wouldnt be nuts, thats why i run one in my buggy. It doesnt have as much high rev low end like all the motors u guys love. He asked for something for LH and with all of the huge straights i think a motor like that would work well


I hate to break it to you but a buggy is a lot different than an SMT. A BB is not necessary in the revo....
Reply
#12
FreeRideJunkie Wrote:I hate to break it to you but a buggy is a lot different than an SMT. A BB is not necessary in the revo....
Then why did you have to have a BB revo? And the RB motor in a revo would be sweet! Not enough low end to do alot of damage to the drivetrain(BS You would still break stuff but. . . ) And more than enough high end to carry you through the straights!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#13
squirrel Wrote:Then why did you have to have a BB revo? And the RB motor in a revo would be sweet! Not enough low end to do alot of damage to the drivetrain(BS You would still break stuff but. . . ) And more than enough high end to carry you through the straights!


I loved the added power. It was AWESOME for bashing. The wheelies on command were a ton of fun. For racing though.... it was overkill....
Reply
#14
A 3.3 is all you need in a revo. It makes crazy power, and is very controllable. BB's are very hard on revo drivetrain parts. Ask tex how many times he busted stuff with his P5. He has since gone back to the small block via the 3.3 motor. Plus, if you get competative and want to race in the pro series or other major santioned race, their is a big weight penalty on the revo's that have bb's in them.

The extended chassis should be standard equipment on a racing revo, IMO. Helps keep the wheels down alot and keeps the truck more stable and forgiving. Makes it easier to drive.

Also, if you're going to run a 3.3, go pick up the ths exhaust! After breaking my vantage pipe, I switch to the stocker for some test and tune in front of my house to compare to the vantage. Then I installed the ths exhuast. WOW! Night and day difference! At the track yesterday I thought I was running it way lean from the sound of it. It was screaming like crazy on the front straight! I checked the temps after the race and it was only 195! Huge improvement over both the vantage and stock pipes!
Reply
#15
You should not put a picco .27 in a revo, no..no..no...no..no...too much torque.
If you do want serious, reliable, .21 power in a revo the RB WS7 is an awesome choice. Mike Czech stated why and that's because it has killer power mid-top but the bottom doesn't hit as hard as most BB's. Plus the strait at Leisure is 200ft+ and no other MT's would touch you down the strait.

If you want more reliability in a revo, stay small block. If you want no reliability but gigantic power when it's running, then Picco.27
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#16
see dan I told u b:p:
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#17
I think he kind of agreed with us both. LoL
Reply
#18
Thanks for all the replies.

Now you got me in a delema though. Cause I dont know if I wana go with the RB or the 3.3 now.

Im hoping to get the 3.3 chassis next week via ebay and then the engine will come next. I am hoping to be able to get out to LHR this summer.

Thanks,
Joe
Reply
#19
Crazy Phantom Wrote:Thanks for all the replies.

Now you got me in a delema though. Cause I dont know if I wana go with the RB or the 3.3 now.

Im hoping to get the 3.3 chassis next week via ebay and then the engine will come next. I am hoping to be able to get out to LHR this summer.

Thanks,
Joe


Meaning that you want to stay with the 2.5 or that you still want to go with another BB?? Don't get me wrong, BB is fun, just not at all practical.
Reply
#20
i think he is saying that he has a dilema b/w the 3.3 motor and an RB motor

RB man
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#21
Oh.... gotcha.

I would reccomend the 3.3. That thing is wickid. I saw it run at the bash and I was extremely impressed. The RB still may be a little much. (Isn't the 3.3 cheaper too?? Not to mention the motor replacement program Traxxas has....)
Reply
#22
For racing, I'd go with the 3.3. For beginners, I'd even recommend sticking with the 2.5R for racing. For beginners, learning to drive and not crash is more important that having the most power available. The more powerfull the motor, the harder it is to drive.
Reply
#23
Mr. Tune Wrote:A 3.3 is all you need in a revo. It makes crazy power, and is very controllable. BB's are very hard on revo drivetrain parts. Ask tex how many times he busted stuff with his P5. He has since gone back to the small block via the 3.3 motor. Plus, if you get competative and want to race in the pro series or other major santioned race, their is a big weight penalty on the revo's that have bb's in them.

The extended chassis should be standard equipment on a racing revo, IMO. Helps keep the wheels down alot and keeps the truck more stable and forgiving. Makes it easier to drive.

Also, if you're going to run a 3.3, go pick up the ths exhaust! After breaking my vantage pipe, I switch to the stocker for some test and tune in front of my house to compare to the vantage. Then I installed the ths exhuast. WOW! Night and day difference! At the track yesterday I thought I was running it way lean from the sound of it. It was screaming like crazy on the front straight! I checked the temps after the race and it was only 195! Huge improvement over both the vantage and stock pipes!


You put the Vantage .15 exhaust on your 3.3? If you did, then that is wrong exhaust to use. You should be using their .18-.21 pipe.
________
Web Shows
Reply
#24
I had the vantage revo pipe on there. It was designed to be a replacement to the stocker, which I believe hasn't changed since traxxas introduced the 3.3 revo.
Reply
#25
vantage has a new pipe out. i believe it is model ss120-01. heres the link i found: http://www.vantageracing.com/site/v2-ima...20R-01.jpg
________
Web Shows
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Large Scale RC's Power Jam Large Scale Racing June 14-17th 2012 Monon, Indiana LOST IN MN 2 5,806 06-07-2012, 11:21 AM
Last Post: LOST IN MN
  GV Shark 4WD 1/10 - Powerfull motor installed but power lost in transmition system Antreas 1 3,676 12-09-2010, 10:08 AM
Last Post: Antreas
  Power Hobby More Juice 2 1,422 02-15-2006, 03:23 PM
Last Post: More Juice
  I think the Schumacher Menace has a bit TOO much power... thenewguy821 19 3,419 01-02-2006, 06:59 PM
Last Post: firesprink281
  Team Orion Wasp Rev CRF - The Power of Science PoPRC 18 3,362 11-30-2005, 11:19 PM
Last Post: Czech-it-Out Graphics
  Need more power!! Obsessive R/C 4 1,551 06-13-2005, 04:41 PM
Last Post: Obsessive R/C

Forum Jump:


Users browsing this thread: 1 Guest(s)