03-01-2007, 02:46 PM
What do you guys think of this setup?
Front:
shock oil...............Mugen 400
shock piston............1.5
spring..................Red
shock loc...............In one hole from middle hole in on tower, middle hole on arm
sway bar................2.7
ride height..............7mm clips
ackerman pos............Front
caster..................1mm in front, 3mm in back
camber..................-2 degrees
toe out.................1 degree
upper arm pos...........upper insert on tower, upper in rear
front arm pos...........2 mm washer in front
front hingepin plate....0 degree hingeplate
lower arm mount.........-1 degree
track...................364
diff....................Mugen 5000 (two gaskets and no small orings)
chassis brace...........Plastic
center
diff.............Mugen 10000 (two gaskets and no small orings)
brakes...........40f/60r bias, TTR Option discs and doubled up calipers
clutch...........Mugen alum shoes, 1.0 spring
gearing..........stock
Rear
shock Oil..............Mugen 350
shock piston...........1.5
spring...........Red
shock loc........In one hole from middle hole in on tower, middle hole on arm
sway bar.........3.0
ride height.......7mm clips
rear hub.........aluminum
rear hub pos.....lower hole
wheel base.......short
camber links.....Middle inner hole on tower, upper inner hole on aluminum hub (upper outer on plastic hubs)
camber...........-2.5 degrees
toe in...........2.25 degrees
antisquat........middle insert
diff.............Mugen 3000 (two gaskets and no small orings)
chassis brace....Plastic
Front:
shock oil...............Mugen 400
shock piston............1.5
spring..................Red
shock loc...............In one hole from middle hole in on tower, middle hole on arm
sway bar................2.7
ride height..............7mm clips
ackerman pos............Front
caster..................1mm in front, 3mm in back
camber..................-2 degrees
toe out.................1 degree
upper arm pos...........upper insert on tower, upper in rear
front arm pos...........2 mm washer in front
front hingepin plate....0 degree hingeplate
lower arm mount.........-1 degree
track...................364
diff....................Mugen 5000 (two gaskets and no small orings)
chassis brace...........Plastic
center
diff.............Mugen 10000 (two gaskets and no small orings)
brakes...........40f/60r bias, TTR Option discs and doubled up calipers
clutch...........Mugen alum shoes, 1.0 spring
gearing..........stock
Rear
shock Oil..............Mugen 350
shock piston...........1.5
spring...........Red
shock loc........In one hole from middle hole in on tower, middle hole on arm
sway bar.........3.0
ride height.......7mm clips
rear hub.........aluminum
rear hub pos.....lower hole
wheel base.......short
camber links.....Middle inner hole on tower, upper inner hole on aluminum hub (upper outer on plastic hubs)
camber...........-2.5 degrees
toe in...........2.25 degrees
antisquat........middle insert
diff.............Mugen 3000 (two gaskets and no small orings)
chassis brace....Plastic