.12tz

[UE-Maxx]

Needle Valve (aka High Speed Needle):1¾ open from closed position
per page 18 of manual.

Mixture Control Screw (aka Low Speed Needle):The head of the mixture
control screw is flush with the carb body per page 25 of manual.

Metering Needle: Head of metering needle screw is flush with the
ball link body per page 25 of manual.

i was 1/4 turn lean on top. and rich on the bottom and mid-range

Those are just the stock settings. Doesn't mean the engine will run with those settings.