09-13-2007, 04:02 PM
Hey guys, my antenna wire got worn down past the braided metal. Emailed nomadio and got told this;
Open the transceiver and make sure the antenna is soldered to the board. The last 32mm of unshielded wire at the end of the antenna is the actual "antenna". If the antenna cable has been damaged You can cut the antenna shorter and strip back 32mm of the shield and have full range again.
Open the transceiver and make sure the antenna is soldered to the board. The last 32mm of unshielded wire at the end of the antenna is the actual "antenna". If the antenna cable has been damaged You can cut the antenna shorter and strip back 32mm of the shield and have full range again.
Tekno EB48.4 HobbyWing XR8 Sanwa M12