03-27-2006, 12:23 PM
The ones I use now are Airtronics 94359z's for both steering and throttle/brakes. They have lasted the longest so far and still going strong.
Airtronics 94359z
Torque: 200oz/in @ 6.0V
Transit Time: 0.10 sec/60 degrees @ 6.0V
http://www.amainhobbies.com/product_info...ts_id/2454
I used to have a Airtronics 94357z on my throttle/brake, I left my truck turned on after a heat with the radio off and the failsafe held it on full brakes, by the time I found it, the servo was fried:mad:
That servo was the fastest servo Ive ever seen.....
Airtronics 94357z
Torque: 125oz/in @ 6.0V
Transit Time: 0.07 sec/60 degrees @ 6.0V
http://www.amainhobbies.com/product_info...ts_id/5224
Airtronics 94359z
Torque: 200oz/in @ 6.0V
Transit Time: 0.10 sec/60 degrees @ 6.0V
http://www.amainhobbies.com/product_info...ts_id/2454
I used to have a Airtronics 94357z on my throttle/brake, I left my truck turned on after a heat with the radio off and the failsafe held it on full brakes, by the time I found it, the servo was fried:mad:
That servo was the fastest servo Ive ever seen.....
Airtronics 94357z
Torque: 125oz/in @ 6.0V
Transit Time: 0.07 sec/60 degrees @ 6.0V
http://www.amainhobbies.com/product_info...ts_id/5224
Kyosho ST-R
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos
Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos
Kyosho Inferno GT
SH .28
O.S. EB Mod V-spec
O.S. T-2050 pipe
Airtronics 94359z servos
Kyosho SP2
O.S. V-spec
Mugen MSR-1005 pipe
Futaba 9350 & 9451 servos
Kyosho Inferno GT
SH .28