LSP Setup...

[Traxxas_Junkee]

none here either

[rocco79]

Always have... Always will.

[cemeb4dk]

I do also, I rarely ever take the engine off the mounts.

[rocco79]

I know the stuff is affected by heat but ive never had a screw loosen

[Michowski]

never had a screw loosen either without locktite

[rocco79]

Not a chance im willing to take

[Eracer76]

Ive used lock washers before, but now I just use loctite. They both work fine for the screws that hold the engine to the mount.
As for the screws that hold the mount to the chassis, they are counter sunk, so you cant used lock washers, you have to use loctite

[Michowski]

its not a chance if you use locking washers. But im not gonna argue this little stuff rocco. I can only humor you so much before i just give up lol. Either way works fine.

[Michowski]

Ive used lock washers before, but now I just use loctite. They both work fine for the screws that hold the engine to the mount.
As for the screws that hold the mount to the chassis, they are counter sunk, so you cant used lock washers, you have to use loctite

That depends on the truck. On the revo its a cap head 3mm screw. Only locking washers work there. I always loctite and washer those screws tho. I dont want that mount moving a hair.

[Eracer76]

That depends on the truck. On the revo its a cap head 3mm screw. Only locking washers work there. I always loctite and washer those screws tho. I dont want that mount moving a hair.

This is a LSP setup thread, not Revo setup :p:

[Michowski]

ok fine. you win

[snakebite46]

I havent used Loctite on engine mounts for the longest time. Motor to mount or mount to chassis. That goes for the XB8, Revo, and LSP.

[FreeRideFrosty]

I use it on the engine to mount ones but those aren't the ones that came loose. Since I don't have locking washers (and personally just like loctite more) that will go on the ones to the chassis. Those loosened up and the motor slid. Better now than race day...

[FreeRideFrosty]

And where can I run a throttle return spring to?? I looked but couldn't really find a good spot.

[rocco79]

Get a small thick rubberband. Run it around the carb neck and the throttle ball end

[FreeRideFrosty]

Hmmm... Didn't think of that. I was anxious to run and I'm sure didn't look everything over. If I don't find a spot I will probably go this route...

[rocco79]

Carlton of the pro series tells ya to use one if he techs your truck and dont have a spring... I like the rubberbands better

[Michowski]

im to lazy to buy a spring so i just use a rubber band also.

[rocco79]

I think i still have the ones you gave me at hardestys ryan!!!:eek: :eek: :eek: (j/k)

[FreeRideFrosty]

You don't need to worry about it hitting anything metal and causing interferance either. (Like us poor non-spektrum guys do. LoL)

[Michowski]

I think i still have the ones you gave me at hardestys ryan!!!:eek: :eek: :eek: (j/k)

i was just thinking about that. If it wasnt for me you wouldnt have been able to race at hardesty's that weekend. Didnt even get a thank you or anything.

[rocco79]

Yes you did! I even offered to buy a beer at applebees!

[Michowski]

no you didnt. If you would have offered i would have had to accepted and i know i didnt accept one

[rocco79]

You were too busy not talking that night

[Michowski]

damn boy i never talk when im out in public. Havent you figured that out yet.