Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Kyosho ST thread
just ran this today and it is awesome, lots of steering and very stable
Front:

- 70w ae fluid
- 1.4 pistons
- White springs (stock)
- Second hole from outside on shock tower
- Second hole from outside on suspension arm
- 20 deg caster blocks
- 2* toe out
- -1 to -2 degree camber
- 18,000 front diff oil (mixed)
- arms very slightly above level
- middle hole on caster block
- A suspension holder/A bushings
- High Block/H bushings
- middle hole on ackerman
- sway bars 5 mm in
- droop limited one turn

Center

- 50 tooth spur
- 13 tooth clutch bell
- aluminum shoe/1.0 springs
- 22,000 Center diff Oil (mixed)

Rear

- 80w ae fluid
- 1.4 pistons
- Blue springs
- Second to outside hole in tower
- Second to outside hole in suspension arm
- 2,000 diff oil
- 3 deg anti squat block
- 2.5 rear toe block
- hubs all the way back (back dremeled to move back as far as possible)
- -1 to -2 degree camber
- camber link inside middle hole in tower/outside hole in hub
- lower hole in rear hub
- sway bar 10 mm in
- droop limited one turn
- arms slightly above level

-12mm hub extenders

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
Truck arrived today at 7:30pm! I'm excited about building my first kit! Waiting on the screw kit to arrive before I start Smile.
Reply
incase you guys didnt see it.


Attached Files
.jpg   DSCF0459.JPG (Size: 35.87 KB / Downloads: 12)
.jpg   dscf04582.jpg (Size: 33.18 KB / Downloads: 9)
.jpg   DSCF0460.JPG (Size: 22.52 KB / Downloads: 9)

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
From what I see and hear. You need it. And a bigger fuel tank too! Smile
Myspace.com/Mtdrew24
Reply
naa, just a motor that i am used too, or a pit stop. lol. think i could have still finished 2nd with a pit stop, oh well live and learn, it was still a blast actually being in a spot other than the back.

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
What exactly is the benefit/difference in the BCE chassis when compared to the standard chassis?

Just curious.
_______________________

Mugen MBX5T C6BB - RB2020
Team Losi 8ight V-Spec - JP1
Kyosho SP2 - P5X - Nova9853
Kyosho ST-R - rolling chassis
Reply
little bit longer, stonger than the stock one, wont flex in the middle as much as stock. and not like it matters but it looks cool. lol

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
Thanks for the information.

Could you provide me the link/contact info for BCE just in case I want to head that route too?

Thanks,
Kevin
_______________________

Mugen MBX5T C6BB - RB2020
Team Losi 8ight V-Spec - JP1
Kyosho SP2 - P5X - Nova9853
Kyosho ST-R - rolling chassis
Reply
best way is to email him and tell him what you want, he is kinda slow on getting stuff out but it is worth the wait. [email protected].

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
From speaking with Ryan Lutz, he told me its really not needed. The BCE chassis is nice but its not a must have. The Stock is just fine. I wouldnt go out and buy it just because everybody else is. I mean it my help alittle but it wont be a drastic improvement. The stock chassis works just fine. Also why would you need a new fuel tank?
T-T-T Confusedalute:
Reply
HAGASAN Wrote:Also why would you need a new fuel tank?

he was just talking smack because i ran outta fuel in my main sunday, too stubborn to pit, and thoght i could make it... nope. Big Grin

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
Joe i see ur point, but u really think lutz would say a kyosho needs non kyosho parts?
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
bingo!
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
He drove Walkers ST-R and didnt see the big difference. He gave me his opinion and said hes not going to get one. From what i can tell from the guys that have spoke highly of the BCE chassis are in fact sponsored by them, aleast some of the guys i know. Im sure its a great chassis but unlike some other cars, its really not that important to upgrade and at $140 for the chassis its not cheap by no means. I thnk back to my T-maxx days and the thousands of cash i spent on that thing to make it the latest and greatest with all the supposedly go-fast goodies, i kick myself in the ass now as i took most of that crap off and used only the minimum needed to make that tank handle somewhat good. I geuss what im trying to say is, save the money and practice, try to be consistent, drive smarter, etc. The ST-R is a top-line car and the stock chassis is proven, and works great. Besides, this aint no TTR where you HAVE to get another chassis. Wink

As for Lutz and his recommendations. You guys have to understand how he is, hes a simple guy. He runs his stuff stock, even when he ran Mugens. Hes sponsored by Panther 100%, he pays nothing, but he only orders a few sets of tires a year when other guys order by the cases. Last year in WV he ran 1 set of tires the whole damn weekend, 1 set of PL Crimes in XTR compound, He pitted out the back of his truck on a cooler at rnd1, he just doesnt go all out like most of us, he just doesnt see the need too.
So take that Bingo back Tex. LOL
T-T-T Confusedalute:
Reply
Finally got my ST-R done. Just in time for the fall classic at lh. It's gonna be fun getting my butt kicked while I learn to wheel this thing Smile.

[Image: kyosho3.jpg]
[Image: kyosho2.jpg]
[Image: kyosho1.jpg]
Reply
atleast he picked the right motor Wink nice ride man!
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
TL28 rocks! 9 minutes runtime baby!
Reply
Looks good.
Reply
Looks cool. Hey, you got a wing sticker, where's mine?! lol
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
Looks good John..

Is it the picture or are the front springs whiter?
A friend will help you move, but a REAL friend will help you move a body.
Reply
^good eyes
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Good eye. The rear sprints are a little darker than the front springs. I'm assuming this is normal? Feels fine to me.
Reply
Ponch, I'll have wing stickers to hand out at the fall classic.
Reply
looks good dude, see ya in the a.m.

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
hand out for FREE???? lol i will prolly take some
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Kyosho Inferno GT tonybr_74 5 2,837 06-24-2008, 03:35 PM
Last Post: tonybr_74
  The Official Mugen Thread allan42r 436 76,365 05-04-2008, 10:26 PM
Last Post: J-Dub
  1/16 Scale Kyosho Nitros GeraldRisch 14 5,028 03-02-2008, 02:54 PM
Last Post: GeraldRisch
  Official Kyosho sp2/WC/St-RR thread pwnzor 299 56,345 02-16-2008, 09:38 PM
Last Post: Toughtrax
  Kyosho need parts help Bfly 1 1,904 01-29-2008, 07:54 AM
Last Post: slaytanic
  Official RC8 thread motoxer4life 158 29,952 10-16-2007, 12:01 PM
Last Post: allan42r
  Kyosho IGT Ferrari auction for "charity" DAVEC-NITRO-RS4 13 4,954 08-29-2007, 03:45 PM
Last Post: DAVEC-NITRO-RS4
  Kyosho Inferno ST-RR BAMF90 70 15,993 08-25-2007, 09:08 AM
Last Post: chickenfarmer3
  Official Mugen MBX5T Thread MX_KEVIN 730 117,194 08-18-2007, 07:12 PM
Last Post: Czech-it-Out Graphics
  Mahomet pic thread slim 21 4,163 06-27-2007, 05:41 PM
Last Post: blktransam

Forum Jump:


Users browsing this thread: 3 Guest(s)