Posts: 1,814
Threads: 271
Joined: Sep 2005
Reputation:
0
Hey guys,
I just bought an LST with a picco .27. The tuning is out of whack and I would like a good starting setting that i can go from tuning wise. Any help would be appreciated.
Posts: 5
Threads: 1
Joined: May 2006
Reputation:
0
Most motors now a days(factory stock I mean) are usually about 3-3.5 turns out on the high-end. Give it a try there and see if it starts...If it will, tune it from there so it's pig rich until it's fully broken in.
Now the low end, I don't know. Some recommend flush with the surrounding ring there. Others I've done had to be all the way up to 11 turns out. I think that was a .26 picco that was like that...all goofy.
Posts: 1,814
Threads: 271
Joined: Sep 2005
Reputation:
0
It's already broken in. I just want to have a starting point. Thanks!
Posts: 9,001
Threads: 126
Joined: Jul 2004
Reputation:
0
just start it up and go from there. Don't mess with the needles at all unless the last owner said it was not running.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965