Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Emission help from mechanics???
#1
I have a 83 F250 that just barley failed the max CO%
This engine is a 351 cu. and only has a little over 5k on it. The last time I tested it passed easily on the dyno. This time they gave it an idle test because they claimed it was too big for the dyno (37" tall tires x 14" wide)

My test results for the idle test were:
HC (220 PPM) my reading = 169 PPM
CO (1.2%) my reading = 3.3%

Is there anything "easy" I can do to lower the CO%??
I hardly ever drive this truck...could that be part of the reason it failed?
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#2
hmmm... Rich?


I think a good romping on would of help...
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#3
if you hardly drive it, class it as a show car and then you dont have to worry about emmisions. just have to keep under so many miles a month
10/8/1871- the great Chicago fire. Approximately 250 people were killed in the fire; 98,500 people were left homeless; 17,450 buildings were destroyed along with the original Emancipation Proclamation.
Chicago Local 281, protecting lives and property for over 100 years.
Lawn sprinklers save your grass, Fire sprinklers save your a$$
Reply
#4
When ever my parents take any of our older vehicles in for emissions they fill it up with premium and then drive them pretty hard, like taking them out to old back roads and opening them up to clean everything out, sometimes you can see smoke come out of the exhaust if you floor it. That would be the simplest thing to try.
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#5
I couldnt tell ya whats wrong without looking at the car.
But, heres a nice article for you to read.
I'd check EGR frist pesonally.


http://www.automotiveu.com/zack5gas.htm
Reply
#6
throw some methonal in there and take it back.
[Image: mich1iy1.jpg]
Reply
#7
Maybe some injector cleaner?
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#8
Most important question, is it carbed or injected? Also is it the original cat or a replacement and how old is it age and mileage wise?
Reply
#9
check egr and all emission related products ie.. smog pump and do what everyone is saying premium and drive the chit out of it
LOVE AMERICA OR GET THE HELL OUT!
www.Suburbanchicagorockcrawlers.com
www.Keyknivesonline.com
www.rcslot.com
rc crawling headquarters and great customer support!
Reply
#10
Thanks for all the replies...

I know that there was alot of gray area without detailed info.
First off it's carburated, has a mild cam, hollow cat and prior to me owning it the smog pump had been removed. I just rebuilt the engine about 2 years ago, but like I said, I drive it maybe a handful of times throughout the year.
It could just need some better fuel and a good pounding.
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#11
Jerry, Like Mich said, fill with premium, and add two botthles of heet additive. It's alcohol, burns hotter and should help that.
Reply
#12
it doesnt burn hotter but it burns cleaner. Since you barely just failed you shouldnt need much at all. Add a bottle of emission stuff sold at any auto store. Do that with like a quarter tank left.
[Image: mich1iy1.jpg]
Reply
#13
just put 93 in it and 2 bottles of rubbing alcohol in it...you will pass
looking for something new to buy.... like a lst2 or something let me know what u got..................
Reply
#14
LOL I like this. Higher octane fuel can make you fail worst! I.E. 89 Camaro with a 350 slightly built with 93 octane failed but with 87 passed!!! Just romp on it a few times before you take it in, you prob got some junk built up in the motor from not running it a lot. And whatever you do don't buy the fuel injector cleaner that you pour in your gas tank, it does nothing! I'm sure Rich can get his hands on the good stuff!! Also I have seen a T.A. pass with no cats or o2's and an 700 lift cam with 1.5 roller rockers! all depends on how much you pay the guy!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#15
And this is why I live way south of I-80, and you guy's pick:poke: on people bout us rednecks? I'd lean the carb out quite a bit and turn idle up a touch so it won't load up! Try that and ya might just pass.:headbang:

Good luck, Matt
Reply
#16
I'd probably try to adjust the carb, put a fresh tank of the current 87 octane gas in the tank, run the piss out if that tank, refill and go back for the retest.
Reply
#17
Michowski Wrote:it doesnt burn hotter but it burns cleaner. Since you barely just failed you shouldnt need much at all. Add a bottle of emission stuff sold at any auto store. Do that with like a quarter tank left.
you ever seen what the headers of a race car look like after about two laps running alcohol? lol dork
Reply
#18
:joy: It Passed!!

I didn't do anything to it...I took it there and had them do the dyno test instead of the idle test...
originally the manager on duty wouldn't let me do that because of the big tires, but this guy was fine with it. I told him that it passed on the dyno before and it barley failed the idle test just this last time.

New test results:

Standards: HC 7.50 CO% 100.0
Results: HC 3.69 CO% 50.4


Cool
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#19
sweet
[Image: mich1iy1.jpg]
Reply
#20
Well, can i still take it out and beat on it for you? LOL! j/k
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
#21
:eek: Please be more specific when you reply!!! Your scaring the children :leghump:













:moon:
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#22
Hahaha! The Truck...
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply


Forum Jump:


Users browsing this thread: