03-02-2007, 06:22 AM
That's the way I was taught to fill diffs Czech. Thought maybe there is something different about the Mugen.
Official Mugen MBX5T Thread
|
03-02-2007, 06:22 AM
That's the way I was taught to fill diffs Czech. Thought maybe there is something different about the Mugen.
03-02-2007, 12:52 PM
the difffs leak lmao
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
03-02-2007, 08:36 PM
just a little....fill to the top and it takes longer....LOL
GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
03-02-2007, 08:37 PM
that would make them leak faster dumass
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
03-02-2007, 08:51 PM
no....dumbass...when there is less fluid in there it heats up and breaks down faster making it leak out.......since when do you run mugen diffs in your TTTURD?
GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
03-02-2007, 09:09 PM
Mine dont seem to leak much. The middle did,but since I put longer screws in there. It seems to be doing fine.
Myspace.com/Mtdrew24
03-02-2007, 09:30 PM
lap: no dumass when you overfill them it actually will pressurize more, forcing the oil up against those teeny o-rings alot harder, then when it diffs out there is no where for the oil to go so it comes out the shaft. Why do u think u grease the shafts before u put them in? DUH man if ur gonna bust my balls atleast be right would u? LMFAO
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
03-02-2007, 09:34 PM
See mike,he didnt know about greasing those things. Why do you think they have froze up on him twice now
Myspace.com/Mtdrew24
03-03-2007, 12:08 PM
My mugen diffs never leaked did they change something since the old MBX5's?
there is an o-ring you are supposed to leave out of the diffs, did you guys do that? I remember reading up on that and the dude I bought my car from had already did the diff massage and mine never leaked.
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
03-03-2007, 12:21 PM
Fill the diffs 80% full or until the gears and cross pins are coverd that is all
Mugen MBX5T Prospec
RB C6bb/O.S. Speed Hitec 5955 Futaba s9351 Jr Z-1 http://www.frontlinetec.com Soo easy a cave man can drive it Mooooooooooogen
03-03-2007, 01:16 PM
the MBX5 diffs leaked worse, most guys sanded the case and used two gaskets
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
03-03-2007, 01:39 PM
heres mine so far...............still got some stuff left to do, it was a very easy / smooth build, I am very pleased with the quality
03-03-2007, 01:42 PM
I sanded mine. Only one gasket. No small O-rings. Just the 2 larger ones for the outdrives.
Myspace.com/Mtdrew24
03-03-2007, 02:12 PM
pwnzor Wrote:heres mine so far...............still got some stuff left to do, it was a very easy / smooth build, I am very pleased with the qualitylooks nice
03-03-2007, 02:57 PM
Casketman Wrote:I sanded mine. Only one gasket. No small O-rings. Just the 2 larger ones for the outdrives. that's the mod I was talking about!
Mugen MBX5T
RBS5 RB2045 Futaba 3PM Hitec 5955, 5965
03-03-2007, 03:17 PM
i dont see why u wouldnt use the small orings that go on the outdrives, doesnt make sense to me that that would make the diffs leak more.....never had diff leaking issues must be a TTR thing
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
03-03-2007, 04:51 PM
Czech-it-Out Graphics Wrote:i dont see why u wouldnt use the small orings that go on the outdrives, doesnt make sense to me that that would make the diffs leak more.....never had diff leaking issues must be a TTR thing Hey Douche bag! These orings dont seal anything... All they do is add friction inside the diff.. they make 5k diff oil feel more like 7k. Putting them in just complicates diff oil setups... HAGASAN Wrote:My T-maxx never leaked either, just blew up every tank. Similar to a TTR then!
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
03-03-2007, 05:47 PM
there goes mike putting foot in mouth again.
GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
03-03-2007, 08:55 PM
that doesnt sound right but whatever. Dont hate cuz u gotta fill diffs every qual lmao
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute: Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
03-03-2007, 09:01 PM
LOLLOLOLOLOL........whatever....LOL
GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
03-04-2007, 10:44 AM
i single gasketed mine, with no s3's, but I did use the s5's everywhere they were called for, the build went really smooth until last night when my dog stepped on my parts tray and sent shizzle flying, I lost 2 o-rings for shocks, so the build was halted at that point, then after 4 hrs of searching, I found them and was able to do shocks, heres the latest stage its in, i need a new servo arm for t/b linkage, get my engine bought from Chad, and put my pipe on and a few other things, and Im ready to rock
03-04-2007, 10:46 AM
looking good dude
03-04-2007, 10:47 AM
nice bro
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune |
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
The Official Mugen Thread | allan42r | 436 | 76,410 |
05-04-2008, 10:26 PM Last Post: J-Dub |
|
Official Kyosho sp2/WC/St-RR thread | pwnzor | 299 | 56,374 |
02-16-2008, 09:38 PM Last Post: Toughtrax |
|
New buggy, losi 8ight T or mugen mbx5T | snoracer | 10 | 3,919 |
01-15-2008, 08:50 PM Last Post: motoxer4life |
|
Mugen Mbx4 Xr Works | PMHOURS | 9 | 3,418 |
01-11-2008, 04:20 AM Last Post: PMHOURS |
|
Mugen Screws | slaytanic | 13 | 3,461 |
12-05-2007, 11:02 PM Last Post: slaytanic |
|
Need some help Mugen Guys!! Prospec? | slaytanic | 8 | 2,674 |
11-27-2007, 05:40 PM Last Post: slaytanic |
|
Official RC8 thread | motoxer4life | 158 | 29,962 |
10-16-2007, 12:01 PM Last Post: allan42r |
|
MUGEN help and set up. | allan42r | 41 | 8,206 |
08-20-2007, 07:32 AM Last Post: chickenfarmer3 |
|
Mugen Linkage???????? | BAMF90 | 27 | 5,850 |
08-15-2007, 03:47 PM Last Post: chickenfarmer3 |
|
Mbx5t pics | motoxer4life | 39 | 7,577 |
08-06-2007, 05:40 PM Last Post: motoxer4life |