Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2006 Illinois Nitro Championships
MX_KEVIN Wrote:I had mine until Sunday when I let Matts little nephew Marky pit for me in the truggy B main. I ran threw the drill with him a few times except I forgot to tell him to keep that damn thing in his pocket. Oh well, he did a great job and I cant blame him for setting it down some where. Kid Dynomite and I could both see the nervousness in his face before the start of that race and im glad he got to be part of the whole thing. He even asked if he could help marshall afterward. Im sure knowone minded him helping out in the buggy B. Those guys drive pretty well and didnt need to mant marshalls anyway....

yeah, then i guess it wasnt yours, cu it was there on saturday also
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
anybody get any pictures for us shut-ins?
got paint?
Colors by Dave - CBD
1-29-07 ... you know.
Reply
traxxas thrasher Wrote:lol....

rocco, he was gonig off the back straight aways jump and in mid air hs battery pack wire got cut, so the servo was left at full throttle, it swerved towards the tubes, hit the tubes and landed on its wheels reving full speed and the guy that was like 5 feet away was too scared to get it I guess, so i was like 20 or so feet away and i ran out to it and shut it off right away, that thing seemed like it was gonig to explode, never seen tires that thin.....lol


That was my one thing..... I would pounce on any runaway. I think in my head I did it because I hoped if I had a runaway someone would do the same thing. (Thank you Sonny for grabbing my Revo runaway back in the day.Big Grin ) I still have a scar on my right hand from one of the runaways. Good times.
Reply
Dave, some guy Perry was taking video footage. He's got mine and Brian's info. If he sends the raw footage Brian will make a cool video like he did for the Race for the Cure.
Reply
satoch Wrote:Dave, some guy Perry was taking video footage. He's got mine and Brian's info. If he sends the raw footage Brian will make a cool video like he did for the Race for the Cure.

do you still have that video?? I dont think i saw that one.
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
Do you have the video from the race for the cure?
Mugen MBX5T Prospec
RB C6bb/O.S. Speed
Hitec 5955
Futaba s9351
Jr Z-1
http://www.frontlinetec.com

Soo easy a cave man can drive it Mooooooooooogen
Reply
Shinner, what happened to ya? couldnt make it?
T-T-T Confusedalute:
Reply
LMFAO, JT...nice sig

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
Thats a true story. Wink
Acne was hot if ya like that kind of trash, you could hide your keys in that face if ya wanted too.
T-T-T Confusedalute:
Reply
chickenfarmer3 Wrote:ya motors all good, glue job was good too. lol.

hey stahoo, did bill ever get in touch with you? i gave him your addy.
Chad,
Yes, Bill did get a hold of me and I have a standard chassis on order with him.
Approx. how many weeks did it take before you received yours?

Thanks again for sending him a message.

Kevin
_______________________

Mugen MBX5T C6BB - RB2020
Team Losi 8ight V-Spec - JP1
Kyosho SP2 - P5X - Nova9853
Kyosho ST-R - rolling chassis
Reply
on the marshalling thing i absolutely cannot stand when a guy grabs it by the wing in one hand and puts his hand under the chassis, a couple guys i see do it, it takes everything for me not to just pin it, i dont want no hands by my fly wheel lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Yeah, we still have the Cure race video. Thing is it only focuses on each of us, probably not something many would care to see, but the editing, tunes, and camera work are first rate.
Reply
Stahoo Wrote:Chad,
Yes, Bill did get a hold of me and I have a standard chassis on order with him.
Approx. how many weeks did it take before you received yours?

Thanks again for sending him a message.

Kevin
no problem, took like 2 weeks.

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
well, what do you grab it by then mike??
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
Czech-it-Out Graphics Wrote:on the marshalling thing i absolutely cannot stand when a guy grabs it by the wing in one hand and puts his hand under the chassis, a couple guys i see do it, it takes everything for me not to just pin it, i dont want no hands by my fly wheel lol

You were on your lid quite a bit, I can see how that would be a concern. :eek:
Reply
nose and wing, or the two side tires if its the fastest
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
coming from the guy in the what Q main?
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Czech-it-Out Graphics Wrote:nose and wing, or the two side tires if its the fastest

well I grab it by the tires, and i guess that dont work to well, i try the wing, but thats not the fastest
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
if i grab it by the tires and get buzzed a little and the guy ends up on his lid again thats the drivers fault, if the guy wants to be marshalled fast stay off the gas when i grab the wheels lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
marshalling by the tires is asking to get hurt... I do it somtimes just because i try and "bobbo" when i marshall... I try and flip people as fast as i possibly can.

My new thing is grabbing the truck by the non pipe side and flipping it asap
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
Reply
i just try to marshall people like i want to be marshalled

GS RACING, TQ FUEL, FASTLANE GRAPHIX, CZECH-IT-OUT
Reply
ill never forget that shit chad, two guys standing with their hands in their pockets and chads running around with a knee brace on and no jacket puting them to shame! LOL
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Anything is better than the "Drimel Style", walking over with your hands in your pockets and a fag in your mouth puffing away and just kicking the car over. Wink

Thrasher thanks for marshalling for me and for Joe Laws, he told me to tell you thanks again. You could make alot of money at these big races for marshalling duties or score some tires, good thing you aint lazy like ponch, You took the money. Thanks kid.
T-T-T Confusedalute:
Reply
lol where is that lazy turd ponch, hey man dont ever bitch about not having money to race again, u coulda cleaned up this weekend!
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
Czech-it-Out Graphics Wrote:coming from the guy in the what Q main?

I qualified badly true. But I lead my whole race until I got hacked by lapped traffic and only had 3 shocks. Even then I only lost my first place by .580 secs. Oh, and had 17 laps just like the next 2 races. I just wish I could've bumped up.

That's not the point Mike. I watched all of the races very closely and I noticed that your vehicles were having a very hard time out there. I also noticed that you spent a lot of time out of control or on your lid. I'm not going to comment further but it's obvious that your a great driver trying to compensate for bad vehicles. Just get a Losi 8 and be done with it...
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  2012 Midwest Nitro Series Round 1 Info Mr. Tune 0 16,388 05-22-2012, 07:59 AM
Last Post: Mr. Tune
  Midwest Nitro Series Round 1 Info. Mr. Tune 48 30,214 08-29-2009, 03:53 PM
Last Post: rocco79
  IHobby Show, Oct.21st-22nd 2006...Rosemont, IL Tex 139 30,458 10-30-2006, 12:25 AM
Last Post: Czech-it-Out Graphics
  Berwyn BBQ Bash Sunday June 4th 2006!!!!!!!!! mikeh 287 59,245 06-08-2006, 11:48 PM
Last Post: BottledBeast
  2004 Illinois State Gas Off-Road Championship! Mr. Tune 17 7,057 12-15-2004, 12:37 AM
Last Post: thenewguy821

Forum Jump:


Users browsing this thread: 18 Guest(s)