Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
8ight Starter Box
#1
I have an 8ight RTR and got This Starter Box and got it set up so it fits well, but the starter box wheel doesn't engage the flywheel by about 1mm, and i think my motor mount is too tall, so it can fit the spin start on with no problems. Next week i am getting an OS 30vg and it is the no pullstart version, so i am wondering what motor mount would work to lower the flywheel enough to be able to start with no problems. The stock motor mount is 20mm high and the mount screws and spaced 30mm apart. I am also running the stock flywheel This one i believe.
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#2
if anyone with an 8ight could measure their motor mount for height, and distance from screw head to screw head, that would be great.
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#3
It's probably the same height as any other 8ight mount. Don't go changing crap like that. Get some 1mm shims and shim up the starter box motor and open up the hole in the chassis with a file so that the wheel can fit up in the chassis well. I'll snap a pic of my chassis in a minute to show you what I mean.

[Image: 100_1664.jpg]
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#4
what do you mean shim up the starter box? the starter box i got can't go anywhere higher
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#5
The motor inside of the starter box can be shimmed up.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#6
Ponch Wrote:The motor inside of the starter box can be shimmed up.

no it cant, the motor mount on the starter box is attached to the top frame, not the bottom like yours
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#7
Damn....IDK, is the wheel hitting the chassis before the flywheel or the box won't allow it to travel down far enough?
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#8
starter wheel doesn't go any higher, i got this compact one and i can't make the wheel any higher, the wheel doesn't hit the chassis, it just doesn't touch the flywheel enough. Is there perhaps a bigger flywheel i could get to fix the problem?

[Image: ofnp1245.jpg]
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#9
nah, cause i have seen a few people start theirs with this starter box, some had trouble but it can be done w/o modding??
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#10
This is my starter box
[Image: 100_4016.jpg]
this is the flywheel access hole
[Image: 100_4021.jpg]
as you can see, the starter wheel isn't very tall, and the flywheel is very recessed
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#11
Return the box and get one of the ones that people have suggested that are KNOWN to work.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#12
i would, but i got it at the leisure shop, which is an hour from me
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#13
i beleive that is the one mitchell runs maybe.... im not positive tho so if it is than his worked last night... i seen it lol
Reply
#14
i saw one at LHR today, but he was using the 8ight, not the 8ight rtr, so i got it at my house now, and i can't get it to work Sad
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#15
ohh didnt know you have the rtr...sorry
Reply
#16
yep, thats what the leisure hour guy said too, looks like i will be spending half my sunday going back to leisure, unless someone has a brilliant idea up their sleeve Smile
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#17
destroy_my_revo_15 Wrote:i beleive that is the one mitchell runs maybe.... im not positive tho so if it is than his worked last night... i seen it lol

They were having nothing but problems with getting that box to start the motor though. I'm not sure if it was how it fit or if it was the box itself. Either way.... return it and get one that works for sure.
Reply
#18
Mitch Pacin uses the same box I have, with great success.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#19
Then he had the box shown above for his truggy maybe. Either way, they were having problems.
Reply
#20
That wasn't even his, it was this mexican (I think he's mexican) guy's that I know and mitch was trying to get his jammin to start on it, but it wouldn't.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#21
Hey i got my 8ight (kit) to work with the ofna chrome top u said u got and it works good. I just lined up the front pegs instead of the back and it works.
Reply
#22
well tomorrow i will take my 8ight rtr and the bad starter box back, and have them show me one that works
Garage:
8ight w/ OS 30VG and JP-3
Revo 3.3 with OS 18TM
Reply
#23
Don't mod it, just return that sucka for something that works out the box.
Reply
#24
son1cn Wrote:well tomorrow i will take my 8ight rtr and the bad starter box back, and have them show me one that works

Some of the lh guys don't know JACK SHI+ and will sell you what THEY THINK will work. Get either that black one that I have or the mugen box. Both are PROVEN THAT THEY WORK.

Print this out;

Mugen Pro Starter Box BII 1/8 Off Road Starter Box
[MUGB0230]

OFNA 1/10 Universal Starter Box
[OFN10256]

And bring that to them. Tell them you want either of those.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#25
or get this one.....I have this one works great.

http://www.amainhobbies.com/product_info...ts_id/3431

all you gotta do is cut the wheel on the starter box, turn it on and make it spin and then take a razor blade and slowly cut like 2-3mm off each side.

[Image: dyn5610.jpg]

and thats^^^^^^^where to put the screws^^^^^ works great
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Just picked up the ofna truggy starter box slaytanic 15 4,253 02-27-2008, 05:44 PM
Last Post: slaytanic
  Starter Box help hansarvin 22 5,432 10-16-2007, 04:35 PM
Last Post: slaytanic
  Mugen Pro Starter Box BII 1/8 Off Road Starter Box Assembly rcrunr1 6 3,430 08-29-2007, 12:53 PM
Last Post: rcrunr1
  8ight Clutchbell Question motoxer4life 19 5,445 07-16-2007, 09:53 PM
Last Post: cr4sh_27
  Stops after taking off glow starter son1cn 8 3,152 04-21-2007, 10:08 PM
Last Post: Czech-it-Out Graphics
  opinions on engines for 8ight Tex 87 16,007 02-26-2007, 08:18 AM
Last Post: rocco79
  starter box for X1-CrT pwnzor 11 2,886 02-16-2007, 12:37 AM
Last Post: pwnzor
  Starter Box for X1-CrT pwnzor 0 1,261 02-15-2007, 07:44 AM
Last Post: pwnzor
  revo starter box Meatwad 3 2,001 01-13-2007, 11:19 AM
Last Post: Meatwad
  Best Revo 3.3 Starter box JTak77 9 4,915 01-06-2007, 07:01 PM
Last Post: son1cn

Forum Jump:


Users browsing this thread: 1 Guest(s)