Posts: 8
Threads: 3
Joined: Apr 2007
Reputation:
0
I jsut got a T-Maxx Pro .15. I just finished break in, and for the life of me, I can't get it to tune right! I started break in at 3 turns on HSN and 3 turns on the LSN (richer than the stock settings), and tried to tune from there. Yesterday during the second to last break in tank, it ran great! But now it won't run, even at the settings I had it at yesterday. I had it tuned for a short time today, but then it started running crappy. Now it's to the point where it idles perfectly, but when I take off it runs for a bit, then dies. Sometimes it will run good until I get into higher RPMs, then it dies. At one time I had the HSN out 5 turns, and the LSN out about 4 1/2, and it still had symptoms of being lean. Can you help me!?
Now, I don't want any "trash that crappy engine and buy this $400 one instead" replies. I just want to run the truck with the TRX .15 for now. I took it apart and noticed that there are 3 shims in between the head and case. I'm running Red Max 20% fuel through it. It was for the most part broken in on 10%, until I recieved it. Coudl this have anything to do with it? Another idea I have is that the glow plug is bad. Any help works! Thanks! Kolby
Posts: 763
Threads: 54
Joined: Aug 2006
Reputation:
0
AE RC10T3 Wrote:It was for the most part broken in on 10%, until I recieved it.
Im confused is this a new engine or used?From what it sounds like this motor was a rebuild? Anyways id start with taking two of the three shims out.Also make sure when you put it back together your cooling head is on straight and tight. Also check your fuel tank for cracks or air leaks.
If at first you dont succeed, suck another seed!:crazy:
I talk to Jesus, he cuts my grass!
Posts: 400
Threads: 22
Joined: Oct 2006
Reputation:
0
It might be your fue line check for holes
xxxnt with trx 3.3
Hpi rush w/2.5
Traxxas Sportmaxx
hpi super nitro rs4 trx 2.5 powered
revo os.18 tm powered
Posts: 588
Threads: 75
Joined: Dec 2006
Check fuel line, I would try running 30%, and a MC-9 glow plug.
Posts: 8
Threads: 3
Joined: Apr 2007
Reputation:
0
Hoobajoob, yes, I bought the truck used, but he rebuilt it and started the break in before I got it from him. I will check my fuel line, and take out 2 shims right now and go test it. Thanks for the help!
Traxxas T-Maxx Pro .15
Posts: 10,555
Threads: 465
Joined: May 2005
Reputation:
0
Good choice on ditching the EZ start.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Posts: 2,264
Threads: 98
Joined: Apr 2006
Reputation:
0
I like them. Me and p-starts don't get along for some reason lol
Posts: 763
Threads: 54
Joined: Aug 2006
Reputation:
0
AddictedtoNITRO Wrote:I like them. Me and p-starts don't get along for some reason lol
unless you got a brand new 3.3 and break 2 pull starts on the first pull
If at first you dont succeed, suck another seed!:crazy:
I talk to Jesus, he cuts my grass!
Posts: 2,264
Threads: 98
Joined: Apr 2006
Reputation:
0
that sucked lol. blisters from tryin to crank the engine over. man that thing was tight
Posts: 833
Threads: 36
Joined: Apr 2007
Reputation:
0
never had a prb. with pull starts, could also be your fuel, me and redmax never got along too well, also try a new plug and lean out the bottom a little "richer isnt always better"...running a engine too rich is just as bad as running one too lean
Posts: 3,247
Threads: 125
Joined: Dec 2005
Reputation:
0
IMO do what rccar411 said to do. unless you really want that pro 15
The worst dirtbiker is always one step ahead of even the best quad rider....
Tex Wrote:WTF, racing ranger 2?????? and racing ranger 1???? #2 needs his ass kicked for taking someone elses name.
Posts: 9,001
Threads: 126
Joined: Jul 2004
Reputation:
0
Hoobajoob Wrote:unless you got a brand new 3.3 and break 2 pull starts on the first pull
did you heat the motor up over 200F and make sure fuel was primed (primed= fuel just up to tip of HSN nipple)
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Posts: 9,001
Threads: 126
Joined: Jul 2004
Reputation:
0
I gave you the explanation of primed because some people flood the motor with gas and that's overly primed.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965