FS: Force .32 (cheap!) and Losi XXX-NT roller

[DuronClocker]

I bought the XXX-NT on here a while back and had my fun with it, but now I want to get into my other ones a bit more. With the .18cvrx in it, it was somewhere in the mid 40s at least, on small ass street tires. Speaking of tires, it comes with a set of 4 wheels with very bald street tires. Also included are 4 more wheels with tires. Two have the ribbed dirt track front tires, and the two rears have some red-pinned Losi dirt tires. I believe I've got another set of tires as well, but one of the tires may be mounted on a wheel, don't remember. Graphite front A-arms. I'll include the entire clutch bell setup, header and pipe, and servos. All you'll need is a radio and motor. I'd sell the 18cvrx, but its going into an RS4 I'm thinking $100 is fair.

The Force .32 is the one I got from hansarvin with the Savage. Pull start was screwed up since I got it (not retracting properly at all), and the string finally broke, so I went and bought an OFNA pull start for it, went to install it, and discovered the one-way bearing was too big to fit inside the pull start, so I took the old pull start apart and put the new cord in it (so the new pull start is now in pieces). The rebuild pull start still doesn't retract properly. Not sure what the deal is. I'm sick of dicking with it, so I'm just going to convert the Savage over to electric I think. Motor has GREAT compression, and I got it to fire twice with the original pull start before it broke, and it sounded very healthy. Seems to be tuned and ready to go. Slide-type carb. Crank is also cracked, but it doesn't affect anything once you install the clutchbell and screw. However, because of this and the pull start, I'll ask $70.

Have a few parts from my savage I won't be needing with the electric stuff, but I'm going to hold onto them for a friend to see if he wants them first.

[nitrodude]

If you want to get rid of savage parts PM me I need some parts for mine.
Thanks

[DuronClocker]

You've been saying that to everyone. Why don't you post up saying what you need? I'm sure one of us fellow Savage owners could help out.

[nitrodude]

I had that thread, i couldnt find anyone with parts , so if I see anyone who wants to sell parts i tell them, lol.
Im just saying that if you want to get rid of savage parts lmk.
Thanks

[cheesecake]

got any pics of the xxxnt

[DuronClocker]

No, I don't unfortunately. Actually, aren't you the one getting rid of those Rustler parts? If you've still got them, timmi79 and I still wanted get out there to pick them up (tomorrow night? I need to put some miles on my car). I could bring the xxx-nt with me?

[cheesecake]

yeah just bring it with. i wont have the money but i could check it out

[bubbaracing]

On the .32, where is the crack on the crank? LMK might be interested?

Matt

[DuronClocker]

On the side of the snout where the clutch bell rides. Its from throwing it in a vice to try and get the flywheel installed. Turns out I had the wrong collet, so I went and bought the right one, and installed in like 2 minutes the right way, lol

[bubbaracing]

OK, would you be lookin for anything in trade for the .32? Look around and see what you need and lmk, you still have the Savage right? LMK what you need for anything and i'll look to see if I have it, i've got a set of Big Joe's on pro-line rims for a Savage? lmk

Thanks, Matt

[DuronClocker]

Losi is sold to cheesecake, pending payment (thanks for the Rustler parts by the way!)

Bubba, I'll let you know if I can think of anything else I need, but those Big Joe's are pretty tempting too. What wheels are they on?

[bubbaracing]

I can't remember what the name of them are, but are Pro-line, here's a pic of them for ya, lmk what ya think ya want to do?

[hansarvin]

I think they're velocities not sure though

[bubbaracing]

Yep you're right there hansarvin! Thanks

[Tex]

velocity/Big Joes