+- ChitownRC (https://www.chitownrc.com)
+-- Forum: Main Forums (https://www.chitownrc.com/forum-4.html)
+--- Forum: Racers Forum (https://www.chitownrc.com/forum-9.html)
+--- Thread: UE Center driveshats for a Tmaxx? Where to order? (/thread-4135.html)
UE Center driveshats for a Tmaxx? Where to order? - Thirdgen89GTA - 07-28-2006
Tried ordering directly from UE themselves, but they are out of stock. Anyone else know of places to buy them from? Als only has the stock ones, are there any other online stores that might have them in stock? PN# 13512T
My poor Tmaxx is setting on shelf with nothing to drive the wheels.
UE Center driveshats for a Tmaxx? Where to order? - RobH - 07-28-2006
https://www.ssl-stormerhobbies.com/cgi-bin/seekpart.pl?src=ns&pn=UE13512T
UE Center driveshats for a Tmaxx? Where to order? - Ponch - 07-28-2006
Ebay.
UE Center driveshats for a Tmaxx? Where to order? - Thirdgen89GTA - 07-28-2006
hehe, right after I made this thread I remembered Stormer hobbies and placed my order.
Now to buy that Lightning Street I've been looking at. 1/7th scale AWD touring car. Yummm....
UE Center driveshats for a Tmaxx? Where to order? - DAVEC-NITRO-RS4 - 07-28-2006
zoom zoom
UE Center driveshats for a Tmaxx? Where to order? - Thirdgen89GTA - 07-28-2006
Sweet! Stormer already sent a shipment confirmation! My driveshafts are on the way.
UE Center driveshats for a Tmaxx? Where to order? - Tex - 07-29-2006
what cups are you using on the outputs?
UE Center driveshats for a Tmaxx? Where to order? - Thirdgen89GTA - 07-29-2006
The ones that come with it.
https://www.ssl-stormerhobbies.com/cgi-bin/seekpart.pl?src=ns&pn=UE13512T
it includes the cups.
UE Center driveshats for a Tmaxx? Where to order? - Tex - 07-29-2006
oh, I thought it came without the cups....whoops
UE Center driveshats for a Tmaxx? Where to order? - Thirdgen89GTA - 08-05-2006
In installed the UE center shafts and to my elation it was easy as can be, I also replaced the transmission case to take care of a few stripped mounting holes.
But to my dissapointment my Tmaxx twisted one rear driveshaft, and tore the cup on the other one. Thank fully its not the UE stuff that failed, but the stock plastic crap.
Now though I'm left with a dillema. Do I drop the extra $120 for the front/rear UE stuff, or what other options should I explore?
UE Center driveshats for a Tmaxx? Where to order? - UE-Maxx - 08-05-2006
I used MIP outer cvd's and ue Ti centers. I did though, use UE drive cups all around. If you go UE, don't go Ti for the outers, go with steel.
UE Center driveshats for a Tmaxx? Where to order? - Traxxas_Junkee - 08-05-2006
your going to have to have better diffs too, the stock once wont hold up anymore. The sliders will no longer be the weak point in the drivetrain it will be the diffs and they will go.
UE Center driveshats for a Tmaxx? Where to order? - RobH - 08-05-2006
MIPs are OKay when you're running a small block. They won't last nearly as long as some UE steel CVDs though.
UE Center driveshats for a Tmaxx? Where to order? - Tex - 08-07-2006
I say buy used from the UE board, someones bount to have some steel UE CVDs for $80 or so.
UE Center driveshats for a Tmaxx? Where to order? - UE-Maxx - 08-07-2006
Tex Wrote:I say buy used from the UE board, someones bount to have some steel UE CVDs for $80 or so.
There's always someone parting out there truck. Theres a few now.
UE Center driveshats for a Tmaxx? Where to order? - RobH - 08-07-2006
Keep in mind, UE makes 6mm, and 8mm CVDs (both in steel or titanium). Stock knuckles would use the 6mm ones. You'd need knuckles that take larger bearings such as the ones included with UE suspension kits for the 8mm CVDs.
UE Center driveshats for a Tmaxx? Where to order? - Tex - 08-07-2006
very good point, make sure to get the 6mm.