Login

allan42r · 09-05-2007, 10:48 AM

i love the 1/10 gas trucks but they really need to go to 4wheel drive to be fun outdoor on these blownout tracks. indoor they are perfect sonny,chris,gq,and i had a lota fun

rcrunr1 · 09-11-2007, 04:13 PM

Got done with goin thru the buggy ....and the clutch shoes are shot

Do the KHZ 7075 shoes fit the Losi flywheel and use the Losi springs?

Will try green, gold, silver springs and see what works for me.

thx

Traxxas_Junkee · 09-11-2007, 04:20 PM

Yeah they fit.

Ponch · 09-11-2007, 05:17 PM

And just use NEW green and gold springs, 2 of each on the clutch.

Czech-it-Out Graphics · 09-11-2007, 05:18 PM

M2Cracing.com best clutch shoes u will find

**Tex** · 09-11-2007, 06:23 PM

That's why they sponsor you cause you rep the shit out of them!!

KHZ=good....I used "used" gold and silver springs when I put my KHZ shoes on and everything worked great...

Czech-it-Out Graphics · 09-11-2007, 06:24 PM

hey i only run whats good, not saying KHZ is bad but the material on the M2C ones are better, more tuning options as well

allan42r · 09-12-2007, 07:21 AM

like ttr ?

chickenfarmer3 · 09-12-2007, 07:25 AM

better.

rcrunr1 · (This post was last modified: 09-12-2007, 08:45 AM by rcrunr1.)

Ponch -- how do you tell the NEW green from the OLD green springs? and whats the difference?

Czech --- for a newbie like me "more tuning options" from M2C (3 shoe weights, 2 materials, 7 clutch springs) can be confusing, not knowing exactly what works.

The KHZ setup was mentioned in this thread by Ponch and UE and I am all 4 going with what is known to work.

I"m looking to set-up the 8 for the inside track with new flywheel/shoes/springs/bearings since its all pretty well trashed.

Czech -- what would be a "good" setup from M2C for a newbie w/ .21VG/JP-3 combo?
Also, do M2C shoes/springs fit on the Losi FW or does the M2C FW need to be used?

The M2C site says "Most people like the soft lights Losi 8ight clutch shoes used with 2 gold and 2 silver springs"
I guess Losi style springs need to be used.

thx

chickenfarmer3 · 09-12-2007, 08:44 AM

m2cracing.com

go there and do a little reading, Mitch has it layed out pretty good on there. Or just call him tell him what type of surface u run on, motor, car..etc and he wil point you in the right direction...very nice guy.

rcrunr1 · 09-12-2007, 08:59 AM

Ive been to that site just trying to learn all I can.
Its great to know I can actually call someone for that detail of setup info.
Have you actually talked to him??
thats awesome customer service!!

chickenfarmer3 · 09-12-2007, 09:03 AM

yes i have, and he will talk your ear off...lolol, just call him and talk, by the time you hang up you will be all sorted out. Smile

rcrunr1 · 09-12-2007, 01:51 PM

Thx, I probably will....

What is meant by "clutch bell endplay" pertaining to clutch set-up?

Czech-it-Out Graphics · 09-12-2007, 02:05 PM

the amount of slop that u can move the clutch bell up and down with the screw tightened, you should have b/w .4 and .5 mm play

Ponch · 09-12-2007, 06:46 PM

rcrunr1, when I said new I was referring to their condition, not like a model change. Just pick up a package of "fresh" springs so you know they'll last the life of the shoes...

~~motoxer4life~~ · 09-12-2007, 07:20 PM

so when you buy new clutch shoes, do you buy new springs too right? Truggys shoes have about 3 gallons and are a little screwed up so should i get both?

Czech-it-Out Graphics · 09-12-2007, 07:45 PM

god yes

hansarvin · 09-12-2007, 08:22 PM

wow think about that for a second your going to spend $22(or so) on new clutch shoes and use old worn out springs? That'd be real smart

rcrunr1 · 09-13-2007, 07:28 AM

LOL kind of like using a new filter after changing ur oil??

Ponch --Some manufacturers do make "running changes" to products and thats what I thought u were saying. Am getting new Avid bearings too, old ones pretty gritty even after cleaning/reoiling. They are pretty cheap as well.

thx

**Tex** · 09-13-2007, 03:46 PM

"LOL kind of like using a new filter after changing ur oil??"

I think that meant to say...
Kind of like using your old, used oil after replacing the airfilter element....

Ponch · 09-13-2007, 04:17 PM

I think he meant on 1/1 cars Gabe, you always should change the oil filter when you change the oil...

**Tex** · 09-13-2007, 04:19 PM

oh

rcrunr1 · 10-10-2007, 08:20 AM

What is the largest capacity receiver battery that will fit in the 8ight's compartment??

My steering servo took a dump at the pizza party and I think I will get the ACE DS1015 or ACE DS1313 to replace it. I hear these things draw a lot if current. I am thinking about the one at the link below but not sure if it'll fit....

[BAL8RX2700] Ballistic Batteries 5 Cell Sanyo 2700mah AA NiMH RX pack JR Connector

And I don't wanna go Li-Po, which is another option.

What do all the other 8ight drivers use for a RX battery? Thanks for the help

UE-Maxx · 10-10-2007, 09:53 AM

That will fit. I ran that battery. Can't use as much foam around the battery as I would like to, but it will fit.

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	New buggy, losi 8ight T or mugen mbx5T	snoracer	10	3,841	01-15-2008, 08:50 PM Last Post: motoxer4life
	8ight-B race roller	motoxer4life	15	3,589	10-02-2007, 12:28 AM Last Post: victor v
	Losi 8ight part number	son1cn	12	3,670	01-14-2007, 06:24 PM Last Post: kevinF
	Starter box for an 8ight	son1cn	27	5,379	01-03-2007, 01:11 AM Last Post: Ponch
	8ight Upgrades	motoxer4life	4	2,020	12-18-2006, 10:41 PM Last Post: chickenfarmer3
	8ight stuff	motoxer4life	11	2,923	12-07-2006, 07:46 PM Last Post: rocco79
	Engine for 8ight	motoxer4life	21	4,432	12-01-2006, 10:47 PM Last Post: rocco79
	Losi 8ight T	Czech-it-Out Graphics	59	10,335	09-25-2006, 01:45 PM Last Post: Czech-it-Out Graphics
	Team Losi 8IGHT	north_shore_racer	3	3,027	05-23-2006, 10:26 PM Last Post: maxximum_44
	losi spy shots / 8ight	GWPHOENIX	20	5,095	05-07-2006, 10:59 PM Last Post: squirrel