Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
somewhat urgent help needed
#76
$20hr labor right? Smile
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#77
I'd own this thing by now!!
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#78
RobH Wrote:you got the shims?


If YOU don't think the clicking is bad, don't worry about it. I just don't want to get my maxx back and break something within a few tanks again.


Yes, I got them...ANY clicking is bad. I just wanted to know if you noticed any noises before I got it.

_________________________

Now the good news...

It's together, rolls smooth as silk...and ran for a whole tank WITHOUT BREAKING!!!
Temps betwwen 180-200 with the head wrapped.

- complete disassembly
- both diffs rebulit and shimmed
- full trans tear down and re-assembly
- driveshaft mods (for clearance on VBS)
- throttle and brake linkage mods and set up
- radio set up & EPA adjusted
- chassis mods (screw access & clearance)
- motor mount spacers eliminated
- eliminated binding pillow balls in front susp.
- complete re-assembly
- set camber and toe F/R
- finish engine break in & tune





Cool
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#79
awsome, thanks! When can I have it back by?

I got my racer X kit from SAiamNE on the UE board yesterday :mad: :mad: :mad:

[Image: rcrx1.jpg]
[Image: rcrx2.jpg]
[Image: rcrx3.jpg]
[Image: rcrx4.jpg]
[Image: rcrx5.jpg]

Barely used my ass. Now i'm out $230.

goodnews: A member of the UE forum has offered to send me his racer X kit and 8mm CVDs, free of charge untill I get my money refunded for the first racer x, and I can buy the stuff if I choose to after that. (which im going to do)... ill just say the total is quite a bit more than $230 though, but his racer x is mint, sooo shiney!
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#80
Can you pick it up??
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#81
Obsessive R/C Wrote:Can you pick it up??

PM me with your address, and when I can pick it up.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#82
Sorry to hear about the bum deal...that blowz
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#83
Thats !@#$%^ up!!
Reply
#84
Wait a minute you paid $230.00 USD for a kit from some guy, and what you show in those pics is what he sent you?!?!? Thats BS, I would hound that guy, bug him everyday about it.
Reply
#85
yep...he got ripped pretty hard on that deal...the seller is scum
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#86
Funny how you could get good detailed pictures but he couldn't???? hhmmmmm....

coughbullshitcough
Reply
#87
DAVEC-NITRO-RS4 Wrote:Funny how you could get good detailed pictures but he couldn't???? hhmmmmm....

coughbullshitcough

he did post pictures, what he NEVER mentioned was that the pictures were takin right after he got the maxx, before he ever ran it. He "assured" me several times that the suspension kit was in like new condition over MSN several times.

http://www.unlimitedengineering.com/foru...hp?t=13353 <--theres the thread on UE. I post pics of the broken arms in post #33, and it goes from there.

That jackoff tried to say I put the suspension kit on my maxx and had a run away, even though Obsessive R/C has had my maxx for the last week or so. :mad:
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#88
Rob, sorry about you getting ripped off. 99% of the guys on the UE board are pretty cool. Sorry you had to find the bad seed in the bunch. Hope everything works out and you get your money back.
Reply
#89
You will want to get his real name, address, and all other info so you can send a police detective over there to rattle his cage. Since he mailed you the parts, it's mail fraud! You can also get the post office inspectors involved if he stiffs you "after he gets back from Australia".
Reply
#90
Back in post #58 you clearly mention that Obsessive has your truck.

By the evening of 10/18 you and he were discussing the transmission clicking. NO WAY you were getting the racerX on that truck and wrecking it by today.

"I'm Insane" pretty much sums up that jerk.

He has tried to turn you into the bad guy, making you defend against his lies. He denies the garbage he sent you. Then he tells another lie to cover his ass. You can almost see some of the damage and wear on those parts in the photo in the Ziploc. Enlarge it, maybe the proof is there. But a clever liar will just claim you put them in the bag and that he shipped them in a padded Haliburton brief case!

Never do cash deals. Or if you do, make him trust you with the parts before you send the money. Then honesty will prevail.
Reply
#91
DAVEC-NITRO-RS4 Wrote:make him trust you with the parts before you send the money.

I'm about to do that for the second time with a member of the UE board. From now on, thats going to be the only way I buy parts online.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#92
Unless you use a Paypal type service. Then you have recourse in a bad deal.

Your nightmare is an incredible thread to read over there at UE. I hope it all turns out fine for you.
Reply
#93
DAVEC-NITRO-RS4 Wrote:Unless you use a Paypal type service. Then you have recourse in a bad deal.

my grandparents are paranoid about computers/internet, so I don't and can't have paypal.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#94
And I'm sure this little event has them wary of any transaction initiated via online communication.
Reply
#95
DAVEC-NITRO-RS4 Wrote:And I'm sure this little event has them wary of any transaction initiated via online communication.

that pretty much sums it up
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#96
I can always sell you my RacerX kit for say $150......its perfect, like new, never been out of the box....just send cash to......





Sorry, couldn't resist.....I'm a bad person........
Reply
#97
DAVEC-NITRO-RS4 Wrote:I can always sell you my RacerX kit for say $150......its perfect, like new, never been out of the box....just send cash to......





Sorry, couldn't resist.....I'm a bad person........


The deal im getting right now is a 16mm Racer X, polished up, high impact front lower arms, 8mm steel cvds, and limiters, $320. Don't have to pay till I get my money back from SAiamNE.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
#98
That's an honest and trusting man. What if you NEVER get a refund from Saimne? You get the second kit for free? I would send him the difference now as a show of good faith. Just saying what I would do...not telling you what to do.
Reply
#99
DAVEC-NITRO-RS4 Wrote:That's an honest and trusting man. What if you NEVER get a refund from Saimne? You get the second kit for free? I would send him the difference now as a show of good faith. Just saying what I would do...not telling you what to do.

If we get into like 1 or 2 months without even hearing from SAiamNE (IFCC & RCMP will be contacted by then), depending on how $$$ is at the time, i'll either pay for it, or send it back to the guy, which he said was another option.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Reply
Now thats a cool guy...
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Quick! Help needed on engine head sizes! Ponch 7 2,295 12-30-2005, 11:24 PM
Last Post: Czech-it-Out Graphics
  Emergency electric help needed... satoch 3 1,232 10-08-2005, 08:36 AM
Last Post: chicagokenji

Forum Jump:


Users browsing this thread: 5 Guest(s)