Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tire Glueing 101
#26
share the wealth mike! feel free to add to it, and if i approve i can add it to the orig post Wink
Reply
#27
Well what wilson told me to do and this really works amazing for me, i was having alot of trouble before, take a griniding wheel to the rubber and scuff it up good, then just brush the ground off rubber off. He said u defeat the purpose of dremeling the tires when u wipe them with denatured because it closes up the pores that u just opened with the dremel
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#28
words of wisdom lol makes sense i will have to give it a try
K3- C5 rody mod, custom gears, KDZ hop ups.

soon *- TTR EB4 S3, ACE servos, RB C5BB, TTR option hop ups, KDZ hop ups.
Reply
#29
im going to try that next time
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#30
Slim Next time clean you finger nails before hand. Now i know why they call you gravy.Big Grin
T-T-T Confusedalute:
Reply
#31
he said gravy.....lol
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#32
Nice... Free Info without even being asked!!

Do youe ever use the rubber band technique? Putting rubber bands around the tire just after glueing to keep the tire firmly pressed into the wheel bead?

I've tried both ways and find the rubber band trick to work well. Only you need to wait about 10 to 15 minutes after the glue dries for the tire to come back to its original shape - since the rubber bands deform the tires alot.
Reply
#33
Instead of rubber bands I use zip ties.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#34
zipties?! dude use rubber bands or atleast electrical tape lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#35
I dont like rubber bands ever since I had a little boo boo and glued the rubber band to the tire Confusedlap:
I like fast drying glue. The glue will be dry before I get back to my starting point.

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
#36
htf did you do that, the jc concepts bands work great but you have to be less liberal with the glue i think lol you dont need that much
Reply
#37
joey Wrote:htf did you do that, the jc concepts bands work great but you have to be less liberal with the glue i think lol you dont need that much

jc c? Im talkin Office Max. It only took a drop to leave a nice chunk of rubber band on my tire.lol Im all better now and got the gluing down. Big Grin

MBX5T - O.S.
MBX5R - Novarossi
Nomadio
Reply
#38
Heck anything is possible. I glued a buggy tire to my finger. LoL Part of the tire was on my finger, and part of my finger was on my tire.... sad day. (I'm definitely nocturnal)
Reply
#39
i just did like 5 sets of tires kinda using a mixture of techniques i clean the beed out on the wheel then the tire, then i use use a green brillo cut small( easier to work with) and skuff the bead on the wheel then the tire , wipe them off with a dry rage to wipe away any access then glue outside then inside and use a band on the outside of the tire and one on the inside edge ( i use the jc concepts bands but tape, bands or zipe ties could work but i make sure i use two per tire) really keeps the bead tight, very little glue is needed.
Reply
#40
For outdoor, should I vent two holes in each tire or just one and should I also vent the rim?
Reply
#41
2 holes in the rubber none in the rims
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#42
Thanks, Mike.
Reply
#43
Czech-it-Out Graphics Wrote:2 holes in the rubber none in the rims

That's gonna start an arguement.......
Reply
#44
carnie gave me a set of wheels to run at rcp. i ran them and for the last heat, good thing i pre warmed up cuz all of a sudden a tire was SEVERLY out of ballance. he had 2 holes in the rim and appearntly when the guy before me washed them, got water in them and settled over night and caused a mud clot in the foam. had to refoam them....
Reply
#45
will super glue work?
or should i get ca glue
[url][/url]

IN GOD WE TRUST, ALL OTHERS MUST PAY.
Reply
#46
CA glue
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#47
I just mount them up and runa bead around the edge of the tire wheel...never failed me yet I have been doing it this way for years, hell I dont even ruff up anything just mount em up and run a bead on eac side takes about 10 mins total (not inclduing the dry time between the sides)
Reply
#48
I usually
1) enlarge the holes already in the rims
2) select a tire/foam combo
3) trim any rubber-casting nubs off the tire where it would meet the rim
4) set the tire onto the rim nicely
5) use a thin piece of strapping tape (actually one piece of tape for the outer bead and one for the inner bead, but not at the same time) to make a nice uniform contact between tire and rim
6) use super thin "Bob Smith" CA glue (usually has a "store" label on it) -- it just seeps right in to the space between the tire and rim
7) let it set up and put a second bead of the CA glue on
8) do steps 5-7 again for the other bead

This might not be as quick as some ways.

I don't do the scuffing/cleaning.

I used to punch holes in my tires, but with these new ways of cleaning tires -- brush mounted in bucket, I just fill up my bucket with water till the water is even with the tops of the bristles, then I clean the tire without getting water up into the rim holes.
Reply
#49
as of late all i do is denature the rim and tire and glue up... i never have a glue job fail.
Reply
#50
I had a glue job fail this weekend using my technique. I will have to do something better now.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Tire/foam combo Briguy 2 1,612 11-17-2007, 10:10 PM
Last Post: Briguy
  Tire balancing motoxer4life 18 4,801 09-26-2007, 12:37 PM
Last Post: BobWoodhouse
  Tire foam trimmin' how to ????'s rcrunr1 20 5,424 08-30-2007, 09:53 AM
Last Post: allan42r
  tire guidance??? Evil3 1 1,674 08-15-2007, 02:44 PM
Last Post: Czech-it-Out Graphics
  1/10th GT Tire Questions goat585 13 4,219 02-26-2007, 02:24 PM
Last Post: Tex
  tire thread.... AddictedtoNITRO 21 5,536 02-19-2007, 03:43 PM
Last Post: AddictedtoNITRO
  1/10 truck tire venting rcrunr1 14 4,012 01-19-2007, 08:40 PM
Last Post: rcrunr1
  Werks prototype MT tire Czech-it-Out Graphics 5 2,155 12-09-2006, 11:16 AM
Last Post: HAGASAN
  Glueing tire to inner bead? Sh1nn3r 26 5,736 08-21-2006, 01:42 PM
Last Post: DAVEC-NITRO-RS4
  Tire compound Ponch 73 12,589 07-16-2006, 12:21 AM
Last Post: rocco79

Forum Jump:


Users browsing this thread: 1 Guest(s)