10-25-2006, 09:05 PM
what would be a great engine for under $200.
|
what is the best engine for a kyosho inferno st rtr
|
10-25-2006, 09:26 PM
I dont know much about the .21 and up group. But under $200 is kinda hard unless you plan to shop on the bay. Look at Amain for motors. Werks is good,the nova motors get high marks too. But for that price. Your not going to have much to choose from.
Myspace.com/Mtdrew24
10-25-2006, 09:27 PM
Trx 3.3!!!!!!!!!!!
8ight | Mini-T | CEN Boat | Stampede | JR R-1
ALL RC STUFF FOR SALE. PM FOR DETAILS. 
10-25-2006, 09:29 PM
^dont be a dick head
there are alot of good RB's, Nova's, WERKS, and OS motors all competeively priced from 200-250
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT  alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
10-25-2006, 09:33 PM
turds
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated" 
10-25-2006, 09:34 PM
what engine do you run mike.
chip is the one who told me to get the lrp 28
10-25-2006, 09:34 PM
Czech-it-Out Graphics Wrote:^dont be a dick head Wasn't trying to. Just a joke.
8ight | Mini-T | CEN Boat | Stampede | JR R-1
ALL RC STUFF FOR SALE. PM FOR DETAILS.
10-25-2006, 09:37 PM
I run the werks motors, LRP motors are garbage just ask maifield lol
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
10-25-2006, 09:37 PM
He has a werks .21 B7(7port) I have a Werks .21 B3(3port)
Hey mike,I think I did screw up the motor some how. I can turn it over by hand. It still takes some force. But it is easier then it was before. Doubt it has changed since you looked at it in peoria. Only had it running 2-3 times since that.
Myspace.com/Mtdrew24
10-25-2006, 09:40 PM
well without a breakin, it would prolly get loose pretty quick, im betting that it got hot and having a blown plug on there doesnt help either.
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated"
10-25-2006, 09:44 PM
I did run it in. But from the way you make it sound. It was not enough. I dont know. It was running fine the past two times I had it out on the track until the clutch bell lost the bolt and it fell off. I am still tuning it. Or I might sell the whole thing. Guy at work wants a truggy. Offered me $400 for it.
Myspace.com/Mtdrew24
10-25-2006, 09:46 PM
well i mean some guys run a couple tanks and they are fine I prefer to run more fuel through them before i race tune them, thats what works well for me, I think if you get your tune closer than it was last time, and if the rod is fine then it will run fine once u get it all tuned up right
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated" 
10-25-2006, 09:48 PM
how about the xtm 24/7 pro. Its a tough durable and powerful engine for around 130.00 and can be converted from pullstart to non for about $10
A friend will help you move, but a REAL friend will help you move a body.
10-25-2006, 09:48 PM
$300,then you open the door for more choices. When I was asking about a motor. Most of the answers I got were RB,Werks(guess who! LOL),Nova,and a couple of OS(V-spec)
Myspace.com/Mtdrew24
10-25-2006, 09:49 PM
I have heard good things about that motor. The 24.7 for couple of years now.
Myspace.com/Mtdrew24
10-25-2006, 09:55 PM
xtm 24/7 pro sounds good ,has anyone ever tested this engine to see how hard it is to tune
10-25-2006, 09:57 PM
What about STS
You can get one shipped for under $150 I run 2 of them and I am happy with it---plenty of motor for indoors at LHR
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen NTC3 RTR assoc .15 NTC3 OS .18 Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR. 
the 24/7 pro is a good starter engine ... plenty of power.. I have a friend wit one and he can keep up step for step wit my p5x....
Ive had 3 and all three where easy to tune,reliable and durable Hobbypeople.net The St-r might get pushed just fine wit a Bf21 Which is Novarossi base sport engine i have one and i love it... Good motor
Dont mess wit my sig Line tune!
--Then follow the rules! haha!-- -Tune
10-25-2006, 09:59 PM
I have a 24/7. Rocco has run about 3 or 4 of them from his savage to his lsp.
They are great inexpensive engines and hold a great tune... IMHO they are great starter engines, becuase they are relatively inexpensive ,have loads of torque but are still very driveable, and if taken care of can easily get 5 gallons or so. Just make sure you get the pro version. Also they come with a pullstarter, so if you have a bump box buy the non pullstart backplate and covert.
A friend will help you move, but a REAL friend will help you move a body.
10-25-2006, 10:00 PM
I have a brand new NR 528 in the F/S section...PM me if your interested
10-25-2006, 10:38 PM
21BF would be probally too small of a mill for truggy. That's just my personal opinion. Maybe a +5 or something along those lines. 528 in the STR is brutal. Insane power thats not needed if you plan on track time. Bashing.....would be better for that mill.
10-25-2006, 10:40 PM
rich the way the trugs are setup now i think it will be fine, in a HB or jammin i dobut it but an str mugen or ttr it shoudl be just fine
Here is a link to my website-
http://www.czech-it-out-graphics.com 1/29/07 never forget....TTT alute:Bringing old know-it-all blow hards back to reallity at a forum near you "Always Imitated, Never Duplicated" |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| trx 3.3 engine problem help please? | gregk20 | 1 | 2,959 |
08-11-2010, 08:02 PM Last Post: Traxxas_Junkee |
|
| inferno gt2 clutchbell upgrade? | grim digger | 0 | 3,094 |
07-05-2009, 06:51 PM Last Post: grim digger |
|
| question about a vspec engine | eraser | 83 | 16,714 |
02-06-2008, 04:36 PM Last Post: J-Dub |
|
| Cold weather engine tune | rcrunr1 | 5 | 2,925 |
01-25-2008, 06:15 PM Last Post: J-Dub |
|
| cleaning engine internals | AddictedtoNITRO | 26 | 7,655 |
12-26-2007, 01:25 AM Last Post: J-Dub |
|
| Comprehensive engine dyno results | mikeh | 14 | 18,026 |
10-31-2007, 02:31 PM Last Post: Czech-it-Out Graphics |
|
| nitro tc3 engine suggestion | hotrodlincoln | 5 | 2,886 |
09-11-2007, 01:16 PM Last Post: Tex |
|
| Learning engine mods | cr4sh_27 | 21 | 6,053 |
08-12-2007, 02:07 AM Last Post: Thirdgen89GTA |
|
| Mugen engine? | motoxer4life | 60 | 12,344 |
07-11-2007, 12:12 PM Last Post: Czech-it-Out Graphics |
|
| engine/esc combo? | AddictedtoNITRO | 3 | 2,483 |
06-24-2007, 08:40 PM Last Post: AddictedtoNITRO |
|
Users browsing this thread: 1 Guest(s)