11-03-2005, 09:43 AM
Make sure you take the diff totally apart and remove the o-rings. Some chemicals can "freak-out" the rubber and some plastics. Take it all apart and wipe everything clean or just let it run off all the parts by letting it sit there for a few minutes first. Nitro cleaner works good, but it tends to evaporate rather quickly, I use rubbing alcohol to clean my diffs and everything else. It cost 99cents at walgreens and it cleans off what ever i need to clean. It works great for tires also. Let the parts sit in some rubbing alcohol for 15 mins or so while swishing the parts around every little while. It works great. I then rinse with water, dry, and reinstall. Just dont forget about the O-rings. DO NOT CLEAN your motor internals with any o-rings still attached, alcohol will mess up the o-rings fast. Also WD-40 will mess up anything that is rubber, so be careful. If you need to clean your car, just use water and/simple green mix. Too much SG is bad for the plastics. so dilute it good.
Sorry for the big paragraph.......im bored. :o
Sorry for the big paragraph.......im bored. :o
T-T-T alute: