06-07-2006, 05:01 PM
Michowski Wrote:they should be included in the bag.
Mine were not either.
(6) 3mm lock nuts
(6) 3X12mm These are the screws that are countersunk for the wing and the screws that go into the wing brace. You might only need two countersunk ones depending on if you got the little cone washers for the 4 screws that hold the brace together.
(2) 3X20mm for the upper mounting holes that go to the tower
(2) 3X16mm for the lower mounting holes
Those are out of the MBX-5 instruction manual.
You might need some longer screws that go to the tower because I am sure the plastic Revo tower is thicker than the MBX-5 towers.