08-08-2006, 10:09 AM
my set up for sp2.
front:
upper arm ran short, inner hole on upright.
middle hole on tower
med blue springs, no clips.
inner hole for lower shock on arm
pretty sure 22º caster.
diff is 5 mugen
shock oil is 60 losi
im bettin 1.4 or what ever stock is.
ackerman is in the rear hole.
A and L blocks.
1oz of lead under the uni/akerman plate...
center is
7 mugen
slight rear brake bias.
rear:
ceter hole, top row for shock tower.
inner hole on arms.
outter hole on rear hubs
inner row, bottom hole for camber link
3º KHZ reat toe plate
2º anti squat
3k mugen in diff
the sways are at the end of the bar, both front and rear appear to be
the same thikness...
shock oil is losi 40, (ill email him now and see if the pistons are
stock...)
ride heigth, rear arms level, and front... arm, bones split differance.
if i missed anything lemme know.
front:
upper arm ran short, inner hole on upright.
middle hole on tower
med blue springs, no clips.
inner hole for lower shock on arm
pretty sure 22º caster.
diff is 5 mugen
shock oil is 60 losi
im bettin 1.4 or what ever stock is.
ackerman is in the rear hole.
A and L blocks.
1oz of lead under the uni/akerman plate...
center is
7 mugen
slight rear brake bias.
rear:
ceter hole, top row for shock tower.
inner hole on arms.
outter hole on rear hubs
inner row, bottom hole for camber link
3º KHZ reat toe plate
2º anti squat
3k mugen in diff
the sways are at the end of the bar, both front and rear appear to be
the same thikness...
shock oil is losi 40, (ill email him now and see if the pistons are
stock...)
ride heigth, rear arms level, and front... arm, bones split differance.
if i missed anything lemme know.