10-05-2006, 05:19 PM
Czech-it-Out Graphics Wrote:the only thing i can see being a problem with the rear diff thing is that:
your bulk head is worn out
your bearings are shot
you still didnt grease the gears
or its not really shimmed well
did you end up getting just a new ring or did you get both ring and pinion gears?
Not sure about the bulkhead, that could very well be the problem.
Bearings all feel smooth
Greased the gears with a nice little tube of AE black grease
And you shimmed it lol
I didn't get a new ring or pinion, I had another set laying around I threw in there.
rocco79 Wrote:Three Q's Ponch....
1. How tight are your rear brakes??? Do the lock up? if so Maaaaybe thats it... Doubtful though...
2. Could the rear bulkhead be screwed up?? I mean if its outta spec that could be the problem....
3. Are landing on power?
Rear brakes never lock up, only the fronts. Rears get about 75% I'd say.
Once again, not sure about the bulks.
Not landing on power, or at least not trying to.
I have another set of rear bulks, when I go in to fix the diff again, I'll switch it out.
Tekno EB48.4 HobbyWing XR8 Sanwa M12