Posts: 1,127
Threads: 48
Joined: Jul 2004
Reputation:
0
Hyper 8 port will bolt right onto the chassis no problem because of the tiny pullstart assembly but hyper's are hit or miss as far as quality. the OS RG has a pull start assemble that is soo gigantic it might require some good shiming and dremel work to get it to work but OS RG"s are really good reliable engines.
-- John --
1:1.. 01 Z28 Camaro A4 Sure.. its stock.
1:8's.. K3, Inferno GT, and a straight line beater car
1:18.. RC18t Mamba and 3s lipo
Posts: 630
Threads: 32
Joined: Jun 2005
Reputation:
0
My hyper 8 runs fine ever since I got the new carb.
Kanai K3
Kanai K2
LSP-R project
Posts: 91
Threads: 4
Joined: Oct 2005
Reputation:
0
I just ordered a brand new pull start and one way bearing. I got rip off (Bastard!) by the seller. Oh well, there will be another week until I can test the RG out.
Oh yeah, the hyper runs just fine. Just PITA during break in.
Posts: 9,001
Threads: 126
Joined: Jul 2004
Reputation:
0
I'd run the hyper, more power :racing:
I have a one way that I don't need anymore for a hyper 8 port. I'll bring it and you can have it at the bash.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Posts: 826
Threads: 14
Joined: Apr 2005
Reputation:
0
my hyper was fast as hell.....
TEAM DENTTEK HACKING OUR WAY TO THE TOP!!!!!!
THE ANGRY PEAR IS BACK
Posts: 3,634
Threads: 181
Joined: Oct 2004
Reputation:
0
take the carb off the rg and put it on your hyper, it will make tuning much less painful
A friend will help you move, but a REAL friend will help you move a body.
Posts: 3,634
Threads: 181
Joined: Oct 2004
Reputation:
0
my jeep.
yes very serious, that has been the fix for the Hypers since they came out....
A friend will help you move, but a REAL friend will help you move a body.
Posts: 91
Threads: 4
Joined: Oct 2005
Reputation:
0
Ahh, thanks for the tip guys.
I am going to put the RG's carb on Hyper after I CA glue the dust cover back. LoL ( I teared it of while cleaning the engine)
One more question. Which needles setting should I follow after switching the RG's carb to Hyper 8 Ports?
Posts: 3,634
Threads: 181
Joined: Oct 2004
Reputation:
0
I am assuming the motor is broke in, a good start point is 2 1/2 turns out on the high and for the low about 1/2 turn in from flush
A friend will help you move, but a REAL friend will help you move a body.
Posts: 826
Threads: 14
Joined: Apr 2005
Reputation:
0
when in doubt lean it out.
TEAM DENTTEK HACKING OUR WAY TO THE TOP!!!!!!
THE ANGRY PEAR IS BACK
Posts: 3,634
Threads: 181
Joined: Oct 2004
Reputation:
0
Ok mr a new engine every month
A friend will help you move, but a REAL friend will help you move a body.
Posts: 826
Threads: 14
Joined: Apr 2005
Reputation:
0
its Mr. 2 months. get it right next time.
TEAM DENTTEK HACKING OUR WAY TO THE TOP!!!!!!
THE ANGRY PEAR IS BACK
