11-15-2005, 03:00 PM
I have an RC10T I want to sell.
About the only thing that is original is the chassis which I sandblasted off the color to the silver look.
I still have all the original catalog, Part listing and other misc documents that came with it.
Diff was just rebuilt in the truck and needs to be set up and the second spare diff was also rebuilt.
With these two alone there is about $40 into it.
I also have a second body for it not pictured at all.
I also have a second identical ESC for sale that I have not included with all this I will part with for $35
As for all below I will part with it all for $265
this truck is very very durable and I have not broke any parts ever since I made the upgrades to it.
Tires on the rear of the truck are not part of the deal---I just never put the other on it at all. However there is a full set of HPI tires and rims and a spare set of fronts as pictured.
Thanks for looking.
Comes with the following:
Novak 410-M1c ESC
ESC Tray
RPM Axle Carriers & Oversized Bearings
RPM Gear Cover
RPM 2.65 Stealth Conversion For RC10T
RPM Super Duty Turnbuckles & Ball Studs Complete set
RPM Heavy Duty Rod Ends Complete set
RPM Ball Bearing Bell crank
Lunsford titanium Gold Shock shafts
Complete set of bearings and not bushings
Spare Diff just rebuilt and Trans was just rebuilt this month
Proline Dodge Ram Truck Body
Additional spare body
Futaba PB2K radio and 2 spare set of crystals
Battery Strap for 6-cell
MIP CVD Set-front and rear
6 to 8 batteries for the radio
I also have a small tackle box full of parts as well:
1- Saiko Motor Case
1- Saiko Battery case
3 sport pack batteries and one Matched cell.
Various diodes for discharge on batteries
Various resistors for motors
Bulbs used for discharge on batteries
3 Spur gears - 2 are 90tooth 1- ???
11 various pinion gears some duplicates
1- Reedy 13 triple motor
1- Green machine2 27 turn stock motor
3- Purple haze 27 turn stock motor
1- Motor---I forget what this one was but I think it is a stock 27 turn
1- Motor heat sink
Various motor Brushes
Various motor springs
Comutator cleaner brushes
Comutator drops
Trinity oil for motors
Motor holder for working on
Tranny grease
Diff grease
Motor spring gauge
Original Shock springs
Rebuilt kit for shocks - new in pkg
Original Shock shafts
Complete spare set of ball studs
Shock Oils
RPM Shock o-rings-new in pkg
1-Spare MIP CVD
Original Bell crank
Deans Battery clips
About the only thing that is original is the chassis which I sandblasted off the color to the silver look.
I still have all the original catalog, Part listing and other misc documents that came with it.
Diff was just rebuilt in the truck and needs to be set up and the second spare diff was also rebuilt.
With these two alone there is about $40 into it.
I also have a second body for it not pictured at all.
I also have a second identical ESC for sale that I have not included with all this I will part with for $35
As for all below I will part with it all for $265
this truck is very very durable and I have not broke any parts ever since I made the upgrades to it.
Tires on the rear of the truck are not part of the deal---I just never put the other on it at all. However there is a full set of HPI tires and rims and a spare set of fronts as pictured.
Thanks for looking.
Comes with the following:
Novak 410-M1c ESC
ESC Tray
RPM Axle Carriers & Oversized Bearings
RPM Gear Cover
RPM 2.65 Stealth Conversion For RC10T
RPM Super Duty Turnbuckles & Ball Studs Complete set
RPM Heavy Duty Rod Ends Complete set
RPM Ball Bearing Bell crank
Lunsford titanium Gold Shock shafts
Complete set of bearings and not bushings
Spare Diff just rebuilt and Trans was just rebuilt this month
Proline Dodge Ram Truck Body
Additional spare body
Futaba PB2K radio and 2 spare set of crystals
Battery Strap for 6-cell
MIP CVD Set-front and rear
6 to 8 batteries for the radio
I also have a small tackle box full of parts as well:
1- Saiko Motor Case
1- Saiko Battery case
3 sport pack batteries and one Matched cell.
Various diodes for discharge on batteries
Various resistors for motors
Bulbs used for discharge on batteries
3 Spur gears - 2 are 90tooth 1- ???
11 various pinion gears some duplicates
1- Reedy 13 triple motor
1- Green machine2 27 turn stock motor
3- Purple haze 27 turn stock motor
1- Motor---I forget what this one was but I think it is a stock 27 turn
1- Motor heat sink
Various motor Brushes
Various motor springs
Comutator cleaner brushes
Comutator drops
Trinity oil for motors
Motor holder for working on
Tranny grease
Diff grease
Motor spring gauge
Original Shock springs
Rebuilt kit for shocks - new in pkg
Original Shock shafts
Complete spare set of ball studs
Shock Oils
RPM Shock o-rings-new in pkg
1-Spare MIP CVD
Original Bell crank
Deans Battery clips
Life is like Beavers, One Damn thing after another- Unknown
If your not breakin parts your not going fast enough-Biodragen
NTC3 RTR assoc .15
NTC3 OS .18
Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.
If your not breakin parts your not going fast enough-Biodragen
NTC3 RTR assoc .15
NTC3 OS .18
Losi 8T, JR8611a ST servo, Futaba 9350 Th\Brk Servo, RB-C6BB Motor and Novarossi 528XR.