02-16-2006, 12:28 AM
I'm selling my full supermaxx, not looking to part out at this time. Most of you have seen it, if not there are plenty of pictures in my gallery. I only accept money orders. All it needs to be RTR is a traxxas forward only shaft, and radio/receiver.
Predator Chassis Kit. Tank, mounts, etc.
Towered VBS. 8 spider diffs, ti skid in the front, alum in the rear, will come with aluminum front skid also.
Racer X suspension kit. 16mm version.
UE 8mm Steel CVDs. Always greased and booted.
Titanium centers. Couple tanks on them.
Strobe Standalone Limiters.
DD VBS Wingmount.
2 OS .18 cv-rx's. One is in the truck, ready to start w/ about 2 gallons of 30% on it, the other has less than a gallon on it.
Blue H1 hummer body. mounted and trimmed, but never ran.
Blue Dodge Ram body. On its last leg
stock T-Maxx tranny. 64t spur + 72 and 66t spurs needs FOC shaft
Fastlane Machine diffs. FLM aluminum cups, quite a few spare pinion and ring gears.
Pro-Line Powerstroke Shocks. Complete kit, but the oil in the coil overs is thick, for a 4 shock setup.
Hitec 5625 digital servo. Used it for about 3 gallons, very fast, always ran it with end points.
JR Z590 and Z270 servos. the z590 is used for brake, the z270 has never been plugged in
Traxxas hurricane rims with panther pythons. Glued, never ran.
Stock T-Maxx tires. Need to be reglued, foams are trash.
Traxxas hurricane rims with 3.8 sporttraxx. Rims are trashed, foams are trashed, tires still have plenty of life left.
Tonys Screws screw kit. Every screw on the truck is from Tonys Screws, and there are plenty of spares.
2700Mah Receiver pack. Charge lasts very long.
There are a couple spare wheel hexs, lock nuts, pillowballs, rod ends, pillowball retainers, bearings, etc.
Looking for $1,250 shipped, $1,200 pickup. Again, it NEEDS a traxxas Forward Only shaft, and a radio + receiver. I only accept money orders (or cash if we meet).
I may go lower, but not too much. (too low meaning something like $900 shipped, for that low, I rather keep the truck and replace the traxxas part that broke and run it more)
This truck has been bashed, but i've never sent it off any cliffs or into any walls at WOT like some people enjoy doing.
If you want new pictures, or detailed pictures, just PM me and I will get them ASAP.
Serious offers, PM me.
![[Image: RTR7.jpg]](http://www.unlimitedengineering.com/gallery/files/3/0/6/6/RTR7.jpg)
![[Image: RTR8.jpg]](http://www.unlimitedengineering.com/gallery/files/3/0/6/6/RTR8.jpg)
Predator Chassis Kit. Tank, mounts, etc.
Towered VBS. 8 spider diffs, ti skid in the front, alum in the rear, will come with aluminum front skid also.
Racer X suspension kit. 16mm version.
UE 8mm Steel CVDs. Always greased and booted.
Titanium centers. Couple tanks on them.
Strobe Standalone Limiters.
DD VBS Wingmount.
2 OS .18 cv-rx's. One is in the truck, ready to start w/ about 2 gallons of 30% on it, the other has less than a gallon on it.
Blue H1 hummer body. mounted and trimmed, but never ran.
Blue Dodge Ram body. On its last leg
stock T-Maxx tranny. 64t spur + 72 and 66t spurs needs FOC shaft
Fastlane Machine diffs. FLM aluminum cups, quite a few spare pinion and ring gears.
Pro-Line Powerstroke Shocks. Complete kit, but the oil in the coil overs is thick, for a 4 shock setup.
Hitec 5625 digital servo. Used it for about 3 gallons, very fast, always ran it with end points.
JR Z590 and Z270 servos. the z590 is used for brake, the z270 has never been plugged in
Traxxas hurricane rims with panther pythons. Glued, never ran.
Stock T-Maxx tires. Need to be reglued, foams are trash.
Traxxas hurricane rims with 3.8 sporttraxx. Rims are trashed, foams are trashed, tires still have plenty of life left.
Tonys Screws screw kit. Every screw on the truck is from Tonys Screws, and there are plenty of spares.
2700Mah Receiver pack. Charge lasts very long.
There are a couple spare wheel hexs, lock nuts, pillowballs, rod ends, pillowball retainers, bearings, etc.
Looking for $1,250 shipped, $1,200 pickup. Again, it NEEDS a traxxas Forward Only shaft, and a radio + receiver. I only accept money orders (or cash if we meet).
I may go lower, but not too much. (too low meaning something like $900 shipped, for that low, I rather keep the truck and replace the traxxas part that broke and run it more)
This truck has been bashed, but i've never sent it off any cliffs or into any walls at WOT like some people enjoy doing.
If you want new pictures, or detailed pictures, just PM me and I will get them ASAP.
Serious offers, PM me.
SOLD: BCE Pro X1-CRT Truggy, Dace Predator/Unlimited Engineering towered VBS Supermaxx
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
Current: Nitro Traxxas Slayer Pro 4x4, Nitro Traxxas Slash
alute:
