Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help With Starter Box
#1
I received my OFNA starter box today. I was wondering how exactly are you supposed to position the pegs? Like are they suposed to be in one of the holes on the front arms and rear or what? I am using the box with a buggy.
Reply
#2
Yes, you basically position them in a way so that the flywheel lines up over the rubber wheel.
___________________________________
Inktown Tattoo


Obsessed F/X Custom Painted R/C Bodies
Reply
#3
I set mine up so that in the front the pegs went between the arms and the chassis, and the same on the rear. They were sorta cone shaped, so if you dropped the buggy on there it'd line right up.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#4
If they are the pegs with the flat sides on top make them line up with the chassis so they look like this

front........./ \

rear..........\ /
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#5
The fronts are just straight up and down and the rear are tiny cone pegs. I will get pictures tomorrow of how I have it now, and see if anyone has any other suggestions.
Reply
#6
If it lines up then it's good! As long as the wheel doesn't rub on the chassis your set!!!
IT'S ALL ABOUT THE PAIN; THE INK AND THE JEWELRY ARE JUST SOUVENIERS
Reply
#7
it can be set up so many different ways, I'm sure you have it in a way that would work.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#8
I put the pegs in a different spot than I originally had them because the buggy was able to move forward a little bit which would allow the wheel to hit the chassis.

The only problem I see with this set up is when I am taking the car off the box, the chassis will rub the posts and take a lot of plastic off. It took some off just taking the car off a couple times.

[Image: starterbox.JPG]

[Image: starterbox2.JPG]
Reply
#9
If the rubbing is really bothering you, pick up another set of the cone posts. (Hope that really didn't sound too bad)
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  losi starter box sucks... blktransam 21 4,522 07-31-2007, 12:42 PM
Last Post: Czech-it-Out Graphics
  RD Racing Starter Box BAMF90 11 3,130 04-12-2007, 09:54 PM
Last Post: BAMF90
  Starter box Question ? SLOW REVO 13 2,989 01-31-2007, 05:40 PM
Last Post: SLOW REVO
  Starter box for an 8ight son1cn 27 5,540 01-03-2007, 01:11 AM
Last Post: Ponch
  charger for rx and starter box packs motoxer4life 9 2,756 12-22-2006, 03:31 PM
Last Post: HAGASAN
  Good Starter Box UE-Maxx 11 2,676 03-28-2006, 10:46 AM
Last Post: Eracer76
  Suggestions for a starter box? Brian_BigSquidRC 1 1,450 01-18-2006, 06:20 PM
Last Post: Czech-it-Out Graphics
  Glow starter charging??? Biodragen 12 2,967 01-09-2006, 04:55 PM
Last Post: mikeh
  Good starter box? Mnster 18 4,228 12-27-2005, 12:26 PM
Last Post: snakebite46
  starter box lsp cjmaxignasze 2 1,275 12-04-2005, 12:25 PM
Last Post: bigjs

Forum Jump:


Users browsing this thread: 2 Guest(s)