Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
good revo wing???
#51
Go cut some grass dude! I just made $10 cutting grass today Smile
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#52
nobody and i mean nobody wants someone to cut their grass, because they have someone my age or older to do it.....i have tried sending out flyers for 2 years and none took me up on it.........beleive me im looking my hardest for a job. so far only job is cutting the grass at the churcxh every once and a while and doing my chores
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#53
dude honestly that plate does nothing but add weight to the truck. No need to make anything stronger. If you cant drill 2 holes in the tower and put a washer on each side and a screw through it then maybe you need to find another hobby lol. Its not rocket science. Not trying to sound rude but your spending money were it doesnt need to be
[Image: mich1iy1.jpg]
Reply
#54
[Image: 1149646138_dsc03318.jpg]
[Image: 1149646167_dsc03319.jpg]
[Image: 1149646187_dsc03320.jpg]
[Image: mich1iy1.jpg]
Reply
#55
I can vouch for the MBX5 wing/mount too. I really put it through a beating today and it took everything. The wing is super flexible and the mount is tough. If you break it then I guess you are just skilled.
8ight | Mini-T | CEN Boat | Stampede | JR R-1

ALL RC STUFF FOR SALE. PM FOR DETAILS.
Reply
#56
lol....kyle thanks....

mich thanks for the pics, that clarifys alot
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#57
in the first pic on the bottom 2 screws is the part were you need to grind the towers flat. Put a washer on each side of the tower and tighten it down and your done. No maitence on it, no hassles, no lose screws, just perfect results. Only maitance I have done so far is change 1 wing
[Image: mich1iy1.jpg]
Reply
#58
ok thanks michowski
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#59
I've got the exact same setup as mich. Super durable! Mine has never broken either.
Reply
#60
I mounted mine same as Mich and Tune. Just a note...when you do it this way, you can't get a wrench on the screws holding on the rear bumper spacer. So decide if you want the bumper on or off before you install the wing mount, or you will have to remove it to access the bumper screws.

Also, when you are grinding away the ribs on the body mount for the two lower bolts, make sure to get it good and flat, or you bend the screws when you tighten it down.
Reply
#61
thanks dave,.....im going to take the bumper off, andf ill make sure the bottom holes are nice and flat
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#62
whats the difference between the mugen mbx4 and mbx5?.......can I use this wing??http://cgi.ebay.com/Mugen-1-8-Nylon-Wing...dZViewItem
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#63
I think one sits a few mm shorter. I run the mbx4 and like were it sits.
[Image: mich1iy1.jpg]
Reply
#64
get the proline wing boil it and be done with it for a hole season of racing.
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#65
Spoken like a true sponsored driver....but if it's true, it's true!
Reply
#66
what the TTR wing is GARBAGE i really dont like the kyosho one it cracks to easily, and the mugen is really like flimsy lol
Here is a link to my website-
http://www.czech-it-out-graphics.com
1/29/07 never forget....TTT Confusedalute:
Bringing old know-it-all blow hards back to reallity at a forum near you

"Always Imitated, Never Duplicated"
Reply
#67
All Mugen Rules!
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
Reply
#68
get the mugen and race it all season.
[Image: mich1iy1.jpg]
Reply
#69
lol guys.......ok im going with the mugen mbx4 and the mougen mount, and the mugen braces.........i dont think the mugrn mount im hgonig to buy comes with scres....can i get these screws at ace?? if so what size are they??

thanks, kevin
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#70
they should be included in the bag.
[Image: mich1iy1.jpg]
Reply
#71
traxxas thrasher Wrote:lol guys.......ok im going with the mugen mbx4 and the mougen mount, and the mugen braces.........i dont think the mugrn mount im hgonig to buy comes with scres....can i get these screws at ace?? if so what size are they??

thanks, kevin

Having trouble spelling "Mugen"? lol

You can get the screws from LH I think.

Oh and Mich when I bought mine they were not included.
Tekno EB48.4 HobbyWing XR8 Sanwa M12
Reply
#72
Michowski Wrote:they should be included in the bag.

Mine were not either.

(6) 3mm lock nuts
(6) 3X12mm These are the screws that are countersunk for the wing and the screws that go into the wing brace. You might only need two countersunk ones depending on if you got the little cone washers for the 4 screws that hold the brace together.
(2) 3X20mm for the upper mounting holes that go to the tower
(2) 3X16mm for the lower mounting holes

Those are out of the MBX-5 instruction manual.

You might need some longer screws that go to the tower because I am sure the plastic Revo tower is thicker than the MBX-5 towers.
Reply
#73
matt, shut-up...lol

michowski the picture shows that they are not included......

and ue-maxx thanks man
Losi 8ight with v-spec[SIZE="4"]
[/SIZE]
Reply
#74
No problem.
Reply
#75
damn sucks for you guys then lol jk. Everything was included in my factory sealed kit. I only had to get a little bit thicker washer for the back on the top screws to get the wing and screws straight. No biggie.
[Image: mich1iy1.jpg]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  E-Revo Brushless Edition? Summit? J-Dub 2 3,543 10-26-2008, 08:23 AM
Last Post: Fastlane GraphiX
  Batteries for stock e revo ricketki 4 6,177 08-05-2008, 06:40 PM
Last Post: BJoe
  RC8T: Lookin Good. J-Dub 12 4,013 06-10-2008, 07:39 AM
Last Post: briyouu
  Tower hobbies is giving away Platnium REVO's! Whoo Hoo! team3six 20 6,777 04-03-2008, 06:20 PM
Last Post: Toughtrax
  Revo, a race truggy? snoracer 61 14,297 02-13-2008, 05:27 PM
Last Post: J-Dub
  Traxxas Revo.... J-Dub 42 8,601 11-10-2007, 08:41 PM
Last Post: Michowski
  Quick Revo Diff question stratcat 12 3,538 08-10-2007, 04:55 PM
Last Post: DAVEC-NITRO-RS4
  Revo? Whitey04 33 7,197 05-27-2007, 09:00 PM
Last Post: J-Dub
  vantage one-way axle for 3.3 revo Meatwad 5 2,415 05-21-2007, 09:25 PM
Last Post: hansarvin
  hyper 7 rtr any good? motoxer4life 20 3,985 05-13-2007, 09:39 PM
Last Post: Evil3

Forum Jump:


Users browsing this thread: 12 Guest(s)