Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mugen Buggy RTR deal (SOLD)
#1
If anyone is interested in a 1/8 buggy setup with:

Mugen MBX4 (good shape, hardly any slop at all, if any)

RB WS7II (2 1/2 gallons on it, still runs very good)

new mugen clutch, 13T CB (couple runs on both)

Ofna 063 torque pipe/header

ofna starter box (chrome top with power panel, has 12V batt installed)

FUT FM radio (T3PDF, computerized)

rim/tires (3-sets, some NIB)

New wing with one run, pretty nice body (not perfect though)

Digital Hitec servo on throttle (update:5475hg, .018secs/76oz@6V)

1100MAH flat RX pack (only charged twice ever)


LMK, I'll make ya a deal. (looking for $450 for everything). This thing is completely RTR with extras. For someone trying to get into 1/8 buggies it'd be a pretty good deal.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#2
how much with out electrics,radio,servos?if your willing to go that route
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#3
so you want Everything except radio gear, or you just want a roller?
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#4
i already have more then enough servo's and several extra synth recievers so i have no need for those items,but basicly everything else
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#5
$380 with everything except

Radio gear
servos
RX pack
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#6
hmm,thats no recivers or radio,no servo's,no battery pack,correct?

buggy with engine,pipe,
wheels and tire sets
and starter box

2 1/2 on engine

now did you break that engine in or did you recieve it already running?

just trying to see how more is left on the engine

one last question how much without engine?

i'm interested but just figureing if there is not much left on that engine or if it was broken and ran by someone else ,who actually knows how much life is left in the engine then,but then again i have so many engines also,but at this moment i can offer $350.00 or if you decide without the engine but everything else ,let me know on either?,if possible ,i dont want you to tear it down for me if you can get the asking price of what you got you know what i mean
thanks GD
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#7
I bought the engine used and the guy said 2 gallons was on it. I put about 1/4 to 1/2 gallon through (about 8-10 tanks, not sure). It runs awesome. still decent pinch left in it, starts right away. It is a bump start only engine.

It's super fast through mid-top end (with 13t bell), could have more torque but the clutch I have on it engauges a little later so it's in it's power range when it hooks. Runs about 210-220F. Rb's like it richer on the LSN and leaner on the HSN though so keep that in mind.

I can do full buggy with motor/pipe, starter box, wheels/tires(2-sets, on-road/off-road(NO NIB) for $350, If you want the tires/rims that are new in package I have to do $380 because I just bought them for $65 and they are still NIB. Otherwise $350 will work with no NIB tires/rims. So you still get 2 sets for the $350 price they are used though.

For a roller buggy without motor/pipe, without starter box, but WITH 2-sets of tires I can do $200. This has a decent body and a like new wing. The buggy is in nice shape, people on here can attest to that, they have seen it. Plus it's a Mugen, not a Ofna LX or something.

LMK, I can drive out and meet you or something.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#8
o.k. i can do th $350. deal then,now if i can get the time to meet up you ,with all this week is going to be bit hectic since the boss went on vacation,well here ,if you have it on friday still i'll take it and meet up with you in the evening, thats my early day,but if you get what your asking for go ahead and do it,i dont hold items for people so i dont expect people to hold them for me,hows that sound?
GD
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#9
Mugen MBX4
RB WS7II
mugen clutch, 13T CB
Ofna 063 torque pipe/header
ofna starter box
rim/tires (2-sets)
wing/body

OK cool, the above is what you will be getting for $350. I need to sell this like yesterday so the sooner we can meet the better. (No job with past due bills)

Can we meet up tonight? maybe another night like Tuesday night around 8pm (or later, whatever) I can meet up anytime your available. Just LMK
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#10
most likly tuesday around 6-7 pm is postal money fine ?i had a $350 postal money order for another but i can send that out later,it is still blank,
thanks joe
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#11
You happen to have a postal money order already made for $350? fishy none the least, but I'm a trusting man and I'll take it. Can we meet at 6pm Tuesday? Is RT.83 and I55 good enough? there is a denny's if you go north on RT.83 about 1 block (right side)
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#12
nothing like that gabe ,i am buying another savage that i intend to stripe down and take what i really wanted which is the engine wasp .28 new and a few other parts and the just resell the roller,which is the $350.00 where for,but since the seller had no feedback anywhere and all my feedbacks are positive he decided to send the truck for me to check out and i was going send the funds afterwards but the truck does not get here until weds or thurs so i had a money order ready but if you want cash that would friday when i can get to the bank early
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#13
Gabe, what would you want for the last set of NIB tires and rims? I need something better than the street tires I have for my Buggy....
#14
It's cool, GD.....I trust ya, I just thought is was such a coinsidence. I'll take the money order.


Newguy, these are proline mugshots with proline wabash rims. All NIP. They are for loamy surfaces such as campmaxx, not blue groove like Leisure. Nonetheless I want $40 for everything. I just payed $65. I was going to use them in STL in the loose dirt.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#15
So GD, where do ya want to meet? better yet, call me
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#16
Sounds good to me... Can I pick them up from you Saturday?
#17
yessa, I'll be there. I'll put them in my pitbox now so they don't get forgotten.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#18
Thank you....
#19
no, thank you

(although I was just thinking I could take them back and get $65.....lolololol. Won't do it though)
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#20
Actually, Do that... I was thinking the same thing. We have almost a month before Camp Maxx, I'm in no big hurry for tires. The Street tires I have now actually do pretty decent at the track.
#21
i'll give you a call sometime today from work,
thanks
joe
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]
#22
Are you sure newguy? This is your deal if you want it.

Cool, I'll have my phone on me GD.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#23
I'm sure Tex. I have plenty of time to pick up tires before Camp Maxx. Thanks for the offer though.
#24
ok, I'll take them back. I hope Leisure takes stuff back without a receipt.....maybe I'll get store credit.
Mugen MBX5T
RBS5
RB2045
Futaba 3PM
Hitec 5955, 5965
#25
gabe what fuel are you running in the engine % wise?
Lycon Racing Products
True MSD & Taylor Ignition Wires For 2 Stroke Gas Engines Zenoah & CY
Stainless Steel Screw Kits & Bulk Packs
For Info [email protected]


Possibly Related Threads…
Thread Author Replies Views Last Post
  Mugen/Novarossi/Proline/Panther/Tmagic/Starter boxes/TONS NEW parts/Airtronics PICS! rocco79 16 6,641 01-09-2011, 10:12 PM
Last Post: snakebite46
  Mugen MBX5R + NIP Body J-Dub 0 2,153 01-09-2011, 11:26 AM
Last Post: J-Dub
  feeler- truggy/ buggy? Racin' Ranger1 0 1,660 01-13-2010, 03:26 AM
Last Post: Racin' Ranger1
  XXX-T package deal super cheap!!!!!! bubbaracing 1 1,900 10-18-2009, 03:57 PM
Last Post: bubbaracing
  Ofna Comp Buggy tcase 1 1,910 09-28-2009, 10:51 PM
Last Post: tcase
  mugen seiki mst-1 stadium truck chassis grim digger 0 1,699 09-28-2009, 11:59 AM
Last Post: grim digger
  mugen mtx 3 with rody 3 roller grim digger 0 1,445 06-16-2009, 09:54 PM
Last Post: grim digger
  3 Sportwerks Mayham Pro 1/8 Buggy's For Sale EJM77 7 4,685 12-15-2007, 07:33 PM
Last Post: EJM77
  RC Parts & Electric car Great Deal!!!! TraxMaxx24 0 1,405 08-24-2007, 07:28 PM
Last Post: TraxMaxx24
  Mini-T package deal! bubbaracing 7 2,426 08-23-2007, 09:15 AM
Last Post: bubbaracing

Forum Jump:


Users browsing this thread: 12 Guest(s)